User's Manual
Table Of Contents
- Revision History
- Contents
- Chapter 1 Safety & Certification Notice 7
- 1.1 FCC Warning Statements 8
- 1.1.1 FCC Part 15.105 statement 8
- 1.1.2 FCC Part 15.21 statement 8
- Chapter 2 System Overview 10
- 2.1 System Overview 11
- 2.1.1 ICS Repeater Installation Location 11
- 2.1.2 ICS Repeater General Information 11
- Chapter 3 System Configuration 13
- 3.1 System Figuration 14
- 3.2 System Module Configuration 15
- 3.3 System Port Configuration 15
- 3.4 AC Power Cable 16
- 3.5 Antenna 17
- Chapter 4 System Specification 18
- 4.1 RF Specification 19
- 4.2 Power Specification 20
- 4.3 Environment Specification 21
- Chapter 5 FR-RLRL45US Installation 22
- 5.1 Installation 23
- 5.1.1 Grounding Connection 23
- 5.1.2 Antenna Connection 23
- 5.1.3 AC Power Connection 24
- Figures
- Figure 1. ICS Repeater Service Application Network 11
- Figure 2. Repeater Figuration 14
- Figure 3. ICS Repeater External Port Configuration 15
- Figure 4. AC Power Cable 16
- Figure 5. RET Port Connector(SU-20SPR-8S) Pin Map 17
- Figure 6. Connection of grounding cable 23
- Figure 7. ICS Antenna Cable Connection. 23
- Used Abbreviations
- Chapter 1 Safety & Certification Notice
- Safety & Certification Notice
- Chapter 2 System Overview
- System Overview
- Chapter 3 System Configuration
- System Configuration
- Chapter 4 System Specification
- System Specification
- Chapter 5 FR-RLRL45US Installation
- FR-RLRL45US Installation
PRIVATE AND CONFIDENTIAL © 2016 FRTEK CO., LTD.
17
FR-RLRL45US
Operating Manual
3.5 Antenna
One of the important system optimizations task is to adjust antenna tilts, or the inclination of the
antenna in relation to an axis. By doing tilt adjustment, we are able to control the received RF power to
concentrate the energy into the new desired direction. FR-RLRL45US Repeater has RET function to
adjust antenna tile.
Figure 5. RET Port Connector(SU-20SPR-8S) Pin Map
Part 27.50
Antennas must be installed in accordance with FCC 27.50. Over 17dBi gain antennas the height of the
antenna above average terrain (HAAT) must not exceed xxxm. For different gain antennas refer to the
relevant rules.
Part 90.635 requirement
Antennas must be installed in accordance with FCC 90.635. Over 17dBi gain antennas the height of
the antenna above average terrain (HAAT) must not exceed XXXX m. For different gain antennas refer to
the relevant rules.
Use of unauthorized antennas, cables, and /or coupling devices not conforming with
ERP/EIRP and /or indoor‐ only restrictions is prohibited.