User's Manual

Sierra ROU 10W User Manual
© FRTek Co. Ltd 2015
12
Confidential: Any reproduction or distribution without the express written consent of FRTek Co. Ltd
or FRTek US LLC is strictly prohibited
4. System Specification
4.1 System Specification
This DAS system is designed for US market and it can support 700MHz SISO/MIMO, 850MHz SISO, 1900MHz SISO,
2100MHz SISO/MIMO and is going to support the 2300MHz SISO/MIMO, 2500MHz SISO/MIMO service(under
development)
Main ROU can support 700MHz, 850MHz, 1900MHz and 2100MHz, Sub ROU can support 2300MHz and
2500MHz signal.
4.1.1 Functional Specification
SIERRA meets the following features and performance features, the details are not specifically mentioned shall
follow functional and performance requirements of “3GPP TS25.1 / TS25.104”, “3GPP TS25.1 / TS25.106”, “3GPP
TS25.1 / TS36.104”.
SIERRA incorporates the following basic functional requirements.
1) MHU is connected with ROUs by optical cable for RF (wired) and ROU shall be installed and operated at
the shade area. LTE, Cellular, PCS, AWS signal transmission between 2 devices will operate through Single-
mode optical fiber. (Optic: supportable for 5.7Gbps)
2) The radio quality of LTE, Cellular, PCS, AWS serviced by SIERRA is the same level as the radio quality of the
base station.
3) When the mobile terminal enters the adjacent base station, SIERRA supports a continuous call (hand
over) of the terminal.
4.1.2 System Specification per Band(ROU10W)
A. 700MHz (28MHz), SISO/MIMO
- Frequency Features
SPEC
Performance Requirements
Remarks
Frequency Band
TX
728 ~ 757MHz
28MHz, LTE Service
RX
699 ~ 716MHz
777 ~ 787MHz
- Output Features
SPEC
Performance
Requirements
Remarks
Output Level
TX
+40dBm/Total
4W@Operator