User's Manual
Sierra ROU 40W User Manual
© FRTek Co. Ltd 2015
22
Confidential: Any reproduction or distribution without the express written consent of FRTek Co. Ltd
or FRTek US LLC is strictly prohibited
– Green LED signifies regular equipment, Yellow LED equipment signifies Link Fail, Red LED signifies Alarm,
Grey LED signifies equipment.
–When you do double-click of mouse left button, you can check status of equipment.
③ Com Port
– Showing the PC connection port which was connected currently.
– Automatically re-search connected RS-232C port when you click the Refresh.
– When you click Port Open and Port Close, RS-232 Port will do <Connection> and <Close>.
④ Reset – Showing the controller DTU and reset screen of system.
⑤ Time advance setting – Showing Time advance setting.
⑥ Download – Showing CPU F/W Download window per equipment.
⑦ Debug – Showing Debug Screen.
⑧ Exit – Terminate the program.
⑨ ID setting – Read the ID of the connected equipment, and sets the ID.
5.4 ROU Status Verification and Control
[Status Mode] to request information on the Status ROU equipment is 1Sec intervals.
Clicking the [Setup Mode] button at the top, [Set] button is activated. Enter to [Settings mod
e], and now stop the Status Request and to Control the ROU items.
If the setting is successfully completed, [Setting success] message will be shown at the window.
When clicking the [Close] button at the top of the window, the screen is shut down and return to the [GUI Mai
n] screen.
5.4.1 700MHz
- 700MHz Details (SISO – MIMO Items are the same)
Items
Unit
Remark
700MHz
Link Path
700MHz / 2.3GHz
Status
Insert
Insert / None
Status
TX Detect AMP
dBm
Status
TX Detect RRFU
dBm
Status
TX ATT
dB
Status/Control
TX FB ATT
dB
Status/Control
TX SD (High)
dBm
Status/Control
TX SD Alarm (High)
Alarm : Red, Normal: Green
Status
TX ALC (High)
dBm
Status/Control
TX ALC (Offset)
dBm
Status/Control
TX SD On/Off (High)
ON/OFF
Status/Control
TX ALC On/Off (High)
ON/OFF
Status/Control
TX ALC On/Off (Offset)
ON/OFF
Status/Control
RX Detect RRFU
dBm
Status