Operating Manual

PrimAer 28GHz Operating Manual

For convenience of the Rectifier installation, it requires more than 5.91 inch(150mm) space from the

front, top, right and left side of the equipment and 9.84 inch(250mm) space from the bottom side of

equipment for cable connection space.

Figure 26. Rectifier Anchor Bolt Assemble

Above picture is a simple drawing for the anchor bolt installation. The Assembly order is shown below.

1. Mark position on the wall. Horizontally 150mm and vertically 130mm.

2. Use hammer drill & concrete 17mm drill bit to drill a hole with a depth of 55mm or more on the

marked

positions.

3. Remove dust from the holes.

4. Use Anchor Punch to fix anchors to the holes drilled on the wall.