Operating Manual

PRIVATE AND CONFIDENTIAL © 2020 FRTEK CO., LTD.
50
PrimAer 28GHz Operating Manual
Figure 28. Rectifier Pole Installation Assemble
Above picture is an assembly drawing of the Rectifier pole installation. Assembly order is shown
below.
1. Separate the Wall Mount Bracket from the Rectifier and assemble to Pole Mount Bracket using
M6 Torx Sems Screw (6ea)
2. Use + driver to assemble the Bracket and SUS Band (4ea) on the pole.
SUS band should be assembled as shown below.
3. Place the Rectifier according to the "Guide & Fixing Groove" picture. (Pole diameter can apply
from 3~14")
4. Screw the M5 Torx Sems Screw (2ea)