Operating Manual

PRIVATE AND CONFIDENTIAL © 2020 FRTEK CO., LTD.
37
PrimAer 28GHz Operating Manual
Figure 13. DU Pole Installation Assemble
Above picture is an assembly drawing of the DU pole installation. Assembly order is shown below.
1. Totally unscrew M6 Torx Sems Screw (2ea) of "B" to separate Wall Mount Bracket from the DU.
(Unscrew M6 Torx Sems Screw (2ea) of "A" only enough for the Wall Mount Bracket to be separated)
2. Use M6 Torx Sems Screw (4ea) to assemble the Wall Mount Bracket and Pole Mount Bracket.
3. Use + driver to assemble the Bracket and SUS Band (4ea) on the pole.
Place the DU according to the "Guide & Fixing Groove" picture. (Pole diameter can apply from 3~14")
SUS band should be assembled as shown below.