Operating Manual

PRIVATE AND CONFIDENTIAL © 2020 FRTEK CO., LTD.
41
PrimAer 28GHz Operating Manual
5.3 SU Installation
5.3.1 Product Installation
The DU can be installed on the wall or pole mounted using brackets/clamps.
Figure 17. Required Space for SU Installation
The SU mounting bracket allows for tilting vertically and horizontally. It requires a minimum of 19.68
inches(500mm) in diameters around the unit from the front view and 11.81 inches(300mm) in radius
from the side view of installation
Figure 18. SU Anchor Bolt Assemble
Above picture is a simple drawing for the anchor bolt installation. The Assembly order is shown below.
1. Mark position on the wall. Horizontally 90mm and vertically 110mm.
2. Use hammer drill & concrete 8mm drill bit to drill a hole with a depth of 40mm or more on the
marked positions.
3. Remove dust from the holes.