Operating Manual

PrimAer 28GHz Operating Manual

Safety & Certification Notice

1.1 FCC Warning Statements

1.1.1 FCC Part 15.105 statement

- PrimAer has been tested and found to comply with the limits for a Class A digital device.

- These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment.

- PrimAer generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the FCC guidelines, may cause harmful interference to radio communications.

- Operation of this type of equipment in a residential area is likely to cause harmful interference in

which case the user will be required to correct the interference at his own expense.

1.1.2 FCC Part 15.21 statement

- Any changes or modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate this equipment

1.1.3 Health and Safety Warnings

- PrimAer should only be operated by approved integrator. The integrator should observe all written

warnings that are in the Operating Manual.

- The integrator who is tasked with handling, installation, operation, and servicing of the PrimAer

System must acquaint themselves with the Operator’s Manual prior to handling. Control and

configuration of this system should be set up according to purpose of use (Refer to the

manufacturer’s product information), it has to satisfy prescribed request items.

- To avoid serious injury, the integrator must turn off the main power switch before installing the

system or performing any maintenance related work.

- FRTek advises that this product not be disassembled without the assistance or guidance of FRTek

staff. Failure to do so may result in electric shock, malfunction of unit, or severe injury. Do not

disassemble, repair or modify product.