User's Manual

10. LOCK FUNCTION: Long press the “+“ “-” button at the same time for 2 seconds, the unit enter “lock”
mode. While locked, the unit will not respond to power changes. The only button will function is the
ON/OFF button, to allow you to turn the unit off in case of any emergency.
To turn the child lock off, long press the “+“ “-” button at the same time for 2 seconds.
11. After cooking is completed, press the ON/OFF button again to turn off the unit.
SETTING MULTI-FUNCTION COOKING MODE
Under off mode, press “Prog” and “+” “-” to select heating level. Then press “Timer” and “+” “-” to set the
cooking time. To confirm the setting, press “Prog” , it will show: Pro 1. After that, press “Prog”, to start next
program setting, it will show: Pro 2, please press “+” “-”,“Keep Warm” or “SEAR” and then “Timer” to set
the second function, then press “Start / Cancel” to begin cooking. To cancel, just press “Start / Cancel” 2
times. The display will always show current cooking mode. To display time, press “Timer” and a countdown
will appear. Press “Timer” again can reset the cooking time.
Notice:
If using the unit in “Prog” or “Keep Warm” or “Sear” function, not setting the TIMER function, but when the
unit is used 180 mins, the LED display shows EE code and sound. The unit will stop automatically.
If using the unit in “Prog” or “Keep Warm” or “Sear” 10 mins, and then set the TIMER, the max Timer is
170 mins. During timer operation, you can change the duration at any time with the “+” and “-“ keys.
NOTE:
The power will completely shut off with 10 second if either (a) the wrong type of cookware is applied or (b)
no cookware is placed on the unit, when the machine is on standby model.
Remark: After pressing the ON/OFF button or cooking has stopped, the fan will run up to a
maximum of 60 seconds until the unit cools. At that point, the unit will turn off.
USABLE AND NONⅣ -USABLE UTENSILS:
 Compatible Pans:
Steel or cast iron, enameled iron, stainless steel, flat-bottom pan/pots with diameter of 12 to 26 cm.
 Non- compatible Pans:
Heat-resistant glass, ceramic container, copper, aluminum pan/pots. Rounded-bottom pan/pots with
the base measuring less than 12cm.
HOW TO CLEAN:Ⅴ
 Clean after each use. Disconnect plug and wait until the unit has cooled down.
 If the pots/pans are used without being cleaned, as this may result in discoloration or stains.
 Do not use benzene, thinner, scrubbing brush or polishing powder to clean the induction cooker.
 Wipe down the unit using a dish washing agent and a damp cloth
 Use vacuum cleaner to suck up dirt from the air intake and exhaust vent.
 Never run water over the unit (If water gets inside it may cause malfunction).
WARNING: any other servicing should be performed by an authorized service representative.
Error Code List:
– If LED-display shows the error code, please reference to the solution as following.
Error Code Cause and Solution
The unit is in standby
mode, but the LED-
display shows “---“,
and the unit sounds
“Dee, Dee, …”
1) You are using the cookware without the magnetism bottom or the
diameter of the bottom is less than 12cm. Please use the cookware with
magnetic and flat base, such as the iron or cast iron cookware, the
cookware with a 18/0 stainless steel base. And all cookware with a base
whose diameter is 12 to 22cm.
The device will enter into standby mode after 10 second without the
suitable cookware.
Pressing ON button to restart the unit.
2) After pressing ON button, please press FUNCTION key to turn on the
This device complies with part 18 of FCC rules.