USER MANUAL ITEM NO.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of fire or electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
I. Important Safety Information When using electrical appliances, basic safety precautions should always be followed including the following: 1. Read all instructions 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against electrical shock do not immerse cord, plugs, or appliance in water or other liquid. 4. Close supervision is necessary when any appliance is used by or near children. 5. Unplug from outlet when servicing. Allow to cool before putting on or taking off parts. 6.
countertop or tabletop where it can be pulled on by children or tripped over unintentionally. 16. Do Not Cook on Broken Cook-Top – If cook-top should break, cleaning solutions and spillovers may penetrate the broken cook-top and create a risk of electric shock. 17. Clean Cook-Top with Caution – If a wet sponge or cloth is used to wipe spills on a hot cooking area, be careful to avoid steam burn, some cleaners can produce noxious fumes if applied to a hot surface. 18.
ⅡSPECIFICATION: z Power Rate: 1800W(Left), 1500W(Right), 3300W(Total) z Voltage:120V~60Hz z Temperature:150℉-450℉ Ⅲ HOW TO USE There are 2 plugs for this unit. The UPPER and LOWER LEFT ZONES are controlled by the left plug (total power is 1800W). And the RIGHT ZONE is controlled by the right plug (power is 1500W). WARING: The left and right plug must utilize two separate dedicated 15 amp breakers.
POWER-ON • Plug the power plug into a suitable outlet. • The control lamp of the POWER switch lights up and an audible signal sounds. • Now the device is in standby mode. • Place compatible ferrous metal cookware in the center of the chosen cook top element. • Now press the POWER key one second switch for to turn the induction cook top on. The control lamp of HEAT and TEMP in the display blinks and an audible signal sounds. HEAT FUNCTION • Press the Function Key HEAT once.
TEMPERATURE FUNCTION • Press the Function Key TEMP once to select the temperature mode. The preset temperature level "270℉" is selected and the cook top turns on. • With the + / - keys, you can change the settings at any time in a range from 150-450℉. (Temperature stages: 150,180,210,240,270, 300,330,360,390,420 and 450℉) TIMER FUNCTION • After the selection of the TEMP or HEAT mode, press the TIMER key once. The display shows the number "0".
• Do not place any empty cookware on the induction field. Heating an empty pot or pan activates the overheating protection and the device turns off. • Do not operate the device if it is damaged in any way or does not function properly. The use of accessories and spare parts not recommended by the manufacturer may lead to damage on the device and injuries. NOTE: The power will completely shut off with 9 seconds if either (a) the wrong type of cookware is applied or (b) no cookware is placed on the unit.
Ⅴ.HOW TO CLEAN 1) Clean after each use. Wait until the unit has cooled down. 2) If the pots/pans are used without being cleaned, this may result in discoloration or stains. 3) Do not use benzene, thinner, scrubbing brush or polishing powder to clean the induction cooker. 4) Wipe down the unit using a dish washing agent and a damp cloth 5) Use vacuum cleaner to suck up dirt from the air intake and exhaust vent. 6) Never run water over the unit (If water gets inside it may cause malfunction).
Error Code Cause and Solution authorized service facility for trouble shooting, repair and adjustment. E6 The appliance is too hot. The cooking temp is over 450℉. After the unit has cooled down, the unit would be automatic switched to standby mode. Pressing POWER key to restart the unit after it reaches standby mode. EE It has reached the max cooking time, please press POWER key to restart the unit if it is necessary. Fruto Industrial International Ltd. Unit 1921, 19/F, China Shine Plaza, No.