Parts Manual

1-10
1.6 Wiring
1.6.1 Controller, MIB, AIF, ATO Wiring Harnesses and Cord sets (Refer to wiring diagram on page
1-59 in Service Manual 8197109.)
ITEM PART # COMPONENT
* 8074546 Controller Communication (used from Controller to Controller)
* 8074547 AIF Communication/Power (used from AIF to AIF and AIF to ATO)
* 8074850 Communication/Power (used from MIB to AIF)
* 8075780 MIB Power/Pan Sw (used from Transformer and Fltr Rly to MIB and Pan Sw)
* 8075789 Harness, MIB -Bulk connector
* 8074655 FV/DV Harness RTD Extension 20” (used from RTD to ATO Board)
* 8074845 FV/DV Harness RTD Extension 28” (used from RTD to ATO Board)
* 8262706 FV/DV ATO/RTD Probe Kit
* 8074621 FV/DV Harness RTD Short (used from RTD to ATO Board)
* 8074771 ATO Power (used from Transformer to ATO Board)
* 1069544 ATO Power to Secondary ATO box (4 and 5 battery only)
* 8074671 ATO Pump/JIB Reset/Bulk Fresh Oil Solenoid Harness
* 8074843 ATO Pump/JIB Reset Harness Non-Bulk
* 1068977 Long Top-off Power (used between Transformer Box to ATO Box) Domestic
* 1081589 Long Top-off Power (used between Transformer Box to ATO Box) CE and Export
* 8074657 Jumper (used on 4 and 5 battery ATO board plug J5 pin 7 and 8)
* 8074573
Controller Locator Wire (used from Controller to Interface Board) See wiring dia-
gram 8051978 for locator pin positions.
* 8074552
Communications Terminator (used on Controller pin J6 and ATO board pin J10 to
terminate network)
* 8067742SP Cord set, 120V Fryer and Motor with Ring Terminals
* 1060516 Cord set, 220-250V CE/Export Fryer and Motor with Ring Terminals
√ * 8074660PK SMT Pin Service Repair Kit
√ * 2302345 SMT Pin Extractor
* Not illustrated.
√ Recommended parts.
See page 1-26, 1-31, 1-39 and 1-51 in Service Manual 8197109 for Pin Positions.