User's Manual

4-34
5. Press the  (2) button again to exit.
The computer displays OFF.
4.13.6 FILTER TIME
The FILTER time option is used to set the elapsed time before a filtration prompt. This option
is useful in lower volume stores, where filtration is desired more often than the amount the cook
cycles would generate.
1. Perform steps 1-3 on pages 4-29 through 4-30.
Scroll to FILTER TIME.
2. With FILTER TIME displayed, press the  (1 yes) button.
The computer displays filter time on the left and 0 on the right.
3. Use the number keys from 0 to 9 to enter the amount of
time in hours between filter prompts (ex. after every
two hours, enter as 2).
The computer displays filter time on the left and 02 on the right.
4. Press the  (2) button to return to product level 2 program
prompt.
5. Press the  (2) button to exit.
The computer displays OFF.
4.14 INFO Mode
The INFO button is used to display information and navigate menus. Pressed once, it shows each
vat’s recovery time.
Press the INFO button for three seconds and it displays usage, filter statistics and last cook cycles.
To enter INFO mode:
1. Press the u (INFO) button for three seconds.
The computer displays info mode for three seconds changing to filter stats.