M2000 Computer Operation Manual Frymaster, a member of the Commercial Food Equipment Service Association, recommends using CFESA Certified Technicians.
M2000 Computer Table of Contents Overview 1-1 Quick Reference Basic Operation Cooking With Multi-Product Display Cooking With Dedicated Display Changing from Breakfast to Lunch Changing from Lunch to Breakfast 2-1 2-2 2-3 2-4 2-5 Computer Initial Setup/Language Selection Programming Fry Station Programming Multi-Product Fryer Adding New Menu Items Add Boil Out Select Boilout 3-1 4-1 5-1 6-1 7-1 7-1 Programming and Test Codes Programming Set Up Recovery Check Loading Default Settings Choosing Sound Le
M2000 Overview FR Cook Cycle Buttons F Ries 1 3 2 ABC DEF Programming button Temp button 2 1 ON/OFF FR GHI 6 5 4 JKL MNO 7 PQR 9 VWX Cook Cycle Buttons 2 1 8 STU F Ries 0 *+ YZ- ON/OFF Product buttons 1.1 General Welcome to the M2000, a computer that retains the one-button ease of the M100B and adds the utility of 40-product menu capability. The computer is easy to use. One button push starts a cook cycle for an item cooked in a dedicated vat.
M2000 Overview The M2000 will operate with electric and gas fryers, both full- and split-pot. 1.2 Service Information Call the “800” number on the cover of this manual for the location of your nearest maintenance & repair center. When requesting service assistance, always give the model and serial numbers of your cooking computer and the type of fryer this cooking computer is installed on.
M2000 Computer Basic Operation Displays Fr F ries 1 Cook Channel Buttons ABC DEF GHI ON/OFF JKL 7 PQR MNO STU 8 VWX 1 9 2 Cook Channel Buttons 0 YZ- *+ ON/OFF Product Buttons Turn Fryer ON Start One-Button Cook Cycle (Dedicated Mode) Press right key for full pot; press key on desired side on a split pot. Press key under display showing desired item. Turn Fryer OFF Press right key for full pot; press key on desired side on a split pot.
M2000 Computer Cooking With Multi-Product Display ---------1 ----- ----1 2 1 3 2 ABC 1 Dashed lines appear in both displays. 2 Press a product button. 3 Vat with appropriate setpoint displays: 4 Vat with inappropriate setpoint displays: 5 Press a cook channel button to begin cook cycle. 6 Display alternates between MCCK and remaining cook time.
M2000 Computer Cooking With Dedicated Display FR F Ries 1 FR 1 2 1 3 2 ABC 1 A menu item, such as FR FRIES shows in display 2 Press a cook channel button to begin the cook cycle. F Ries DEF GHI 6 5 4 JKL MNO fr fries 1 3 Display alternates between abbreviated product name and remaining cook time. 4 Duty is displayed when it is time to shake the fry basket. duty 5 Press cook channel button to cancel alarm. 1 FRis 6 Pull is displayed when the cook cycle is complete.
M2000 Computer Changing from Breakfast Setup to Lunch hash brn 1 3 2 ABC DEF Press product button for french fries. GHI 6 5 4 JKL MNO 1 R FF Y 7 PQR 2 hash brn STU 8 VWX 0 YZ- *+ Press and hold the cook channel button under the display for five seconds. 4 Display changes to FR Fries. <<<<<>>>>> Change both displays to FR FRIES 2-4 9 2 3 ABC Computer will change from Hash Brn to <<<<<>>>>>; an alarm will sound.
M2000 Computer Changing from Lunch Setup to Breakfast p Fr F ries 1 1 2 1 3 2 ABC 1 Fr F ries Computer displays DEF GHI 6 5 4 JKL MNO PQR FR FRies 2 Press product button for hash browns. 3 Computer display will change from FR Fries to <<<<<>>>>>; an alarm sounds. 7 sh Ha rn b fr fries <<<<<>>>>> 2-5 STU 8 VWX 9 2 0 YZ- *+ 4 Press and hold the cook channel button under the display for five seconds. 5 Display changes to Hash Brn.
M2000 Installation/Setup Computer Setup: Selecting Language, Sound Volume Used for initial setup of computer. 1. Computer displays OFF. . 2. Press 3. code shows in the left display. 3 3 2 2 4. Press (3322). 5. The left computer display will alternate between loading and menu. The right display will count up to 39 and go blank. 6. Computer displays OFF. 7. Press . 8. code shows in the left display. 1 Computer has two volume settings. 6 5 9. Press 5 (1655). 10.
M2000 Installation/Setup Used to set menu parameter defaults for US or non-US menu items. *NOTE: Changing the language or the menu choicer on a previously programmed computer eliminates any programming entered for special menu items. 16. Menu appears in the left display*; USA or Non-USA appears in the right. 17. Press to toggle between menu choices. 18. With desired menu in the right display, press to lock in choice.
Programming for Dedicated Product Operation Example: Programming Dedicated Vats 1. Computer displays OFF (Computer must be off to enter program mode.) 2. Press 3. Code appears in left display 6 1 5 0 (1650) with product keys. 4. Press Stores menu item in product button. 5. FR FRIES appears in the left display. Right display is blank. 6. The LED will illuminate in product button 1, the default product button for fries. 7. 2 to advance to another menu item if required.
Programming for Dedicated Product Operation second duty alarm will sound. Sets Cooktime. 13. Use numbered product keys to enter a time if required. M :00 is the default setting. 14. Follow step 10 to toggle between automatic and manual alarm canceling. Sets Quality time. 15. Press . Remove appears in left display. M 3:10 appears in the right. This sets cook time for the product selected. Use numbered keys to change time as required. 3:10 is the default cook time for french fries. 16.
Programming Multi-Product Operation Programming Multi-Item Vat 1. Computer displays OFF (Computer must be off to enter programming mode.) 2. Press 3. Code appears in left display 6 1 5 0 (1650) with product keys. 4. Press 5. FR FRIES appears in the left display. Right display is blank. 6. The LED will illuminate in product button 1, the default product button for fries. 7. Press Stores menu item in product button. Sets cooking temperature. Sets duty time. 2 to move to the next menu item. 8.
Programming Multi-Product Operation 14. Use numbered product keys to enter a time if required. M :00 is the default setting. 15. Follow step 12 to toggle between automatic and manual alarm canceling. Sets cook time. . Remove appears in the right display. M 3:40, the 16. Press default cook time for filets, appears in the right display. Use numbered product keys to enter a new cook time in minutes and seconds as required. to toggle between automatic and manual alarm 17. Press canceling. Sets quality time.
Programming New Menu Items Adding New Menu Items 1. Computer displays OFF (Computer must be off to enter programming mode.) 2. Press 3. Code appears in left display 6 1 5 0 (1650) with product keys. 4. Press 2 5. Use the to advance through menu items until the display reads Prod 8 or a higher number. 6. Press and right display will read EDIT. The first character in the left display will flash. 1 Enter product name. 7. Use keys to enter name of the product. Each key can display one of three letters.
Programming New Menu Items . Duty 1 appears in the left display. M :00 in the 15. Press right. Use product keys to enter a duty time as required. 16. Press to toggle between automatic and manual alarm canceling. Manual alarm canceling is the default setting. Sets first duty. 17. Press . Duty 2 appears in the left display. M :00 appears in the right. 18. Use numbered product keys to enter a time if desired. If no duty time is required, enter 0:00. 19.
Programming New Menu Items 28. Press 2 to advance to next programmable menu location. 29. With the last programmed menu item displayed on the computer, press to lock in menu item and exit programming.
M2000 Adding/ Selecting Boilout Add Boil Out 1. Computer displays OFF. . 2. Press 3. Left display shows CODE. 6 1 5 0 (1650) with product keys. 4. Enter 1 5. Use to back through programmed items and numbered products to Boil Out, which is in the product 40 position. 6. Press a gray product button to store Boil Out. Green LED in button will illuminate. 7. Press ON/OFF button to turn off fryer and lock in programming. Select Boil Out 1. Press to turn fryer off. 2. Computer displays OFF. 3.
M2000 Adding/ Selecting Boilout 8. Press and hold the cook channel button under the vat that is to be boiled out. Hold for approximately five seconds and release. Boil Out should appear in display over button. 9. The cook channel will be dedicated to boil out and have a setpoint of 195° F (90°C). 10. Press cook channel under Boil Out display. Follow McDonald’s boil out procedures outlined in PM cards. 11.
Quick Reference For Programming Codes Programming 1. Press . 2. Computer displays OFF. Computer must be off to enter programming mode. Used to program product buttons and add new menu items. . 3. Press 4. code shows in the left display. 1 6 5 0 (1650). See detailed description 5. Press on pages 4-2 — 6-3. Set Up 1. Press . 2. Computer displays OFF. Used to set up computer on initial install or to move a computer to a fryer with a different configuration. 3. Press . 4.
Quick Reference For Programming Codes Recovery Check 1. Press Displays time required for the fryer to raise the temperature of the oil 50°F (10°C) during a critical stage of warmup. . 2. Computer displays OFF. 3. Press . 4. code shows in the left display. 1 6 5 2 5. Press (1652). 6. A time appears in both displays. This code is used to check the fryer’s recovery time. Factory Reset 1. Press Reloads factory settings for standard menu items. . 2. Computer displays OFF. 3. Press . 4.
Quick Reference For Programming Codes Set Language Displayed, Sound Level 1. Press . NOTE: Changing the language displayed on the computer or the menu selection, eliminates any specialized product programming entered by restaurant personnel. 2. Computer displays OFF. Used to set speaker volume, choose language of the computer display and domestic or international menu defaults. 3. Press . 4. code shows in the left display. 1 6 5 5 5. Press (1655).
Quick Reference For Programming Codes Hi-Limit Check . 1. Press 2. Computer displays OFF. *Note: For leftside use 8888 and the left 1 & 2 buttons) 3. Press . 4. CoDE shows in the left display. 9 9 9 9 YZYZYZ5. Press YZ(9999*) for full vat or right side of split pot. Note: The test can only be conducted with the oil above 180°F (82°C). If the shortening temperature is below 180°F (82°C), the computer will display TOO COLD. 6. HI-LIMIT shows in the right display. 1 right cook channel key. 7.
Quick Reference For Programming Codes Moving Computer to Different Fryer . 1. Press 2. Code appears in left display. 1 6 5 6 3. Press (1656) with product keys. 4. Gas appears in the left display, YES in the right. Used when the computer is moved to a fryer with a different configuration. 5. Press to toggle between YES and NO in the right display. Leave YES in the display for a gas fryer; leave No for an electric fryer. 6. Press to lock in your choice. 7.
Distress Displays HI HI 1 3 2 6 5 4 DEF A BC 2 1 2 1 JKL GHI 7 PQR MNO 8 S TU 9 VWX 0 + Y Z- * HI: Shown only when the computer is in non-dedicated mode (displaying dashed lines). Indicates the fryer is 15°F (8°C) above setpoint. HOT HOT 1 1 2 1 3 2 DE F AB C 6 5 4 JKL GHI 7 P QR MNO 8 S TU 2 9 V WX 0 + Y Z- * Hot: Displayed when the vat reaches 410°F (210°C).
Distress Displays ignition Failure 1 ignition Failure 3 2 ABC 2 1 2 1 DEF 6 5 4 JK L GHI 7 8 PQR MNO 9 ST U 0 VWX + YZ- * Ignition failure: Indicates the fryer is not heating. It is displayed when the oil temperature is above 450°F (232°C) and the hi-limit has opened, halting the heating of the oil. It is also displayed if the fryer looses its ability to heat oil.
Distress Displays ignition Failure 501°F/260°C Hot 410°F/210°C Hot 396°F/202°C* hi: Displayed at 15°F (8°C) above setpoint in non-dedicated mode French Fry Setpoint Fr Fries Low Temp { { 350°F/176°C 335°F/168°C 315°F/157°C 180°F/82°C Temperature/Display Chart for M2000 *CE display 9-3
Frymaster, L.L.C.