Specifications Sheet

Frymaster’s OCF30G gas fryers are the ultimate
oil-conserving, high-performance fryers, available
as a single fryer and 2-4 frypot battery models. As
operators are pressured to do more with less, the
OCF30G gas fryers help improve profit margins
with labor and energy-saving features, contribute
to green and sustainability initiatives, safeguard
workers, and move toward healthier eating.
The open stainless steel frypot is easy to clean.
These fryers reduce operating costs by using less oil,
30-lbs versus 50-lbs. Oil life is maximized because
the smaller frypot maintains a favorable ratio of
fresh to used oil. This higher ratio of fresh oil slows
down the accumulation of breakdown products that
shortens oil life so the oil lasts longer. Less oil to fill
and longer times between fills saves operators well
over 40% on their oil costs.
This savings helps meet consumer demand for
healthier food choices and regulatory mandates to
use trans fat-free oils by offsetting the higher cost
of these oils. A new COOL Mode feature reduces the
temperature when the fryer is not in use and saves
energy.
The built-in filtration system encourages more
frequent filtering, which preserves oil life and
ensures consistent, great-tasting food. The simple,
proven, 2-lever process has recessed handles tucked
safely inside the cabinet to prevent unplanned
filtration and dangerous extension into busy work
spaces.
The independent frypot construction of the
OCF30G gas fryers makes it easy to repair or replace
a frypot. Reliable operation is backed globally by
Manitowoc’s KitchenCare
®
.
The OCF30G gas fryer offers one frypot (full and/
or split).
• 75,000 Btu/hr. input (18,892 kcal/hr.) (21.97
kw) per full frypot
• 37,500 Btu/hr. input (9,446 kcal/hr.) (10.98 kw)
per split frypot
*Liter conversions are for liquid shortening @ 70° F.
Specifications
FPGL130C FPGL130-2C
Models
OCF30G Ultimate Oil-Conserving Gas Fryers -- Domestic & Export
8700 Line Avenue
Shreveport, LA 71106-6800
USA
Tel: [phone]
Tel: [phone]
Fax: [phone]
E-mail: [e-mail]
www.frymaster.com
Bulletin No. 818-0656
Revised 2/13/15
OCF30G Gas
Frypot
Standard Gas
Frypot
OCF30G
Ultimate Oil-Conserving
Gas Fryers --
Domestic & Export
Project
Item
Quantity
CSI Section 11400
Approval
Date
- 40% less oil; 10% less energy
- SMART4U® 3000 Controller
• Maintains food quality
• Extends oil life
• Monitors equipment performance
• Supports frystation management best
practices
Approved
for Australia
Standard Features
Options & Accessories
• 30-lb. (15 liter)* frypot with open-pot design
requires 40% less oil to cook as much food as
frypots almost twice its size, while using 10%
less energy and producing less waste.
• Frying area 13” x 14” x 3-3/4” (33 x 36 x 9.5 cm)
full frypot; 6” x 14” x 3-1/2” (15 x 36 x 8.9 cm)
split frypot
• SMART4U® Technology
-- 3000 controller has operation management
features that monitor and help control food
and oil quality, oil life, and equipment per-
formance. Has 20 programmable cook but-
tons and auto adjusts cook time to load size.
• Innovative safety features offer proprietary
advantages over other fryers--automatic high-
limit reset and audible alarm if 2nd drain is
opened.
• Independent frypot construction of batteries
makes it easy to repair or replace a frypot while
maintaining continuous operation.
• Durable, infrared burners.
• Center-mounted RTD, 1° action thermostat.
• Built-in filtration with rear oil flush puts filtra-
tion where it’s most convenient to use, right in
the fryer battery.
• Stainless steel frypot, door, and cabinet sides
• Adjustable casters
• 3/4” gas connection
• Drain safety switch
Oil Attendant® Auto Top Off (See
OCF30ATOG spec sheet)
CM3.5 controller
Baskets lifts (except Australia)
Spreader cabinet -- any single placement
Stainless steel frypot cover
Sediment tray for full frypot only
Fish plate for full frypot only
Side splash shield
Full basket
Triplet basket
Chicken/Fish tray
Approved
for Korea