Warranty
FS-CURTIS, CURTIS-TOLEDO, INC 1905 Kienlen Avenue, St. Louis, Missouri 63133 +1 (314) 383.1300 Fax +1 (314) 381.1439
www.fscurtis.com
Form #WDATP-1
Effective: 8-15-2012
Supersedes: N/A
DISTRIBUTOR INFORMATION SHEET
AIR TREATMENT LIMITED WARRANTY INFORMATION
The manufacturer warrants the product it manufactures, when properly installed, operated, applied, and maintained in accordance with procedures
and recommendations outlined in manufacturer’s instruction manuals, will be free from defects in material or workmanship for a period as specified
below, provided such defect is discovered and brought to the manufacturer’s attention within the aforesaid warranty period.
The manufacturer will repair or replace any product or part determined to be defective by the manufacturer within the warranty period, provided such
defect occurred in normal service and not as a result of misuse, abuse, neglect or accident. Normal maintenance items requiring routine replacement are
not warranted. The warranty covers parts and labor for the warranty period unless otherwise specified. Repair or replacement shall be made at the
factory or the installation site, at the sole discretion of the manufacturer. Any service performed on the product by anyone other than the manufacturer
must first be authorized by the manufacturer.
Unauthorized service and use of unauthorized or pirated parts voids the warranty and any resulting charges or subsequent claim will not be paid.
Products repaired or replaced under warranty shall be warranted for the unexpired portion of the warranty applying to the original product.
The foregoing is the exclusive remedy of any buyer of the manufacturer’s product. The maximum damages liability of the manufacturer is the original
purchase price of the product or part.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER WRITTEN, ORAL, OR STATUTORY,
AND IS EXPRESSLY IN LIEU OF THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE. THE MANUFACTURER SHALL NOT BE LIABLE FOR LOSS OR DAMAGE BY REASON OF STRICT LIABILITY IN TORT
OR ITS NEGLIGENCE IN WHATEVER MANNER INCLUDING DESIGN, MANUFACTURE OR INSPECTION OF THE EQUIPMENT OR ITS FAILURE
TO DISCOVER, REPORT, REPAIR, OR MODIFY LATENT DEFECTS INHERENT THEREIN.
THE MANUFACTURER, HIS REPRESENTATIVE OR DISTRIBUTOR SHALL NOT BE LIABLE FOR LOSS OF USE OF THE PRODUCT OR
OTHER INCIDENTAL OR CONSEQUENTIAL COSTS, EXPENSES, OR DAMAGES INCURRED BY THE BUYER, WHETHER ARISING FROM
BREACH OF WARRANTY , NEGLIGENCE OR STRICT LIABILITY IN TORT.
The manufacturer does not warrant any product, part, material, component, or accessory manufactured by others and sold or supplied in connection
with the sale of manufacturer’s products.
Warranty Period
Unless otherwise stated: one (1) year from the date of shipment to the buyer from the manufacturer or manufacturer’s agent or eighteen (18) months
from the date of shipment from the factory whichever occurs first.
See Warranty Periods Table for specific warranty period per model.
For detail warranty information, extended warranty and registration information the GENERAL TERMS, WARRANTY POLICIES AND
PROCEDURES HANDBOOK (ATWDH-1) should be referenced.
Model
WARRANTY
Labor
Coverage
Travel &
Mileage
Freight
Extended
Warranty
Program
3
Warranty
Authoriza
tion Form
Required
RNP Series
Refrigerated Dryers 5/10 and 15 scfm
1 YEAR - PARTS AND LABOR
12 months from date of shipment from factory.
A one-time removal/re-installation labor allowance
-
2
-
-
RNP Series
Refrigerated Dryers 25 through 500 scfm
1
2 YEARS - PARTS AND LABOR
24 months from date of shipment from factory.
Heat Exchanger (parts only) for three (3) years. 5 year total.
-
RNE Series
Refrigerated Dryers 100 through 3000 scfm
1
RDS Series
Energy Savings Dryers 90 through 3000 scfm
RNH Series
High Temperature Dryers
1
2
-
RNV Series
High-Capacity Dryers
1 YEAR - PARTS AND LABOR
12 months from date of shipment from factory or factory agent
(not to exceed 18 months from date of shipment from the factory,
whichever occurs first.)
-
DHB Series
Heated Blower Purge Dryers
-
DHP Series
Heated Purge Dryers
-
DL Series
Desiccant Dual Tower Dryers
DLW Series
Desiccant Dual Tower Cabinet Dryers
-
CF Series
Filters
-
CF
-
-
CFE Series
Bulk Mist Eliminator
5 YEAR - PARTS ONLY
60 months from date of shipment from Factory.
(Filter cartridge only)
-
CF
-
-
MD Series
Membrane Dryers
1 YEAR - PARTS AND LABOR
12 months from date of shipment from factory.
(Extended 3 years with filter package and maintained yearly)
-
CF
-
-
Parts
90 DAYS - PARTS ONLY
After installation or (1) year from date of shipment from factory.
(whichever occurs first.)
-
-
-
-
1
At the discretion of the manufacturer, the smaller, low flow models will either be repaired in the field or exchanged with a replacement unit.
2
One-time allowance
3
See the GENERAL TERMS, WARRANTY POLICIES AND PROCEDURES HANDBOOK (ATWDH-1) for extended warranty information.