Datasheet

DESCRIPTION
FSP300-40PFB is an industrial level of switching power
supply. The power supply comes to offer the total power
capacity up to 300 Watts, and uses unique active PFC
(Power Factor C orrection) circuit design with its high-load
electrical components, makes it to be perfectly used in an
industrial environment. In addition, with its full range of
input and output electrical features, the power supply is
ideally the best choice for server, workstation,
communication or any other automation applications to
use. The product also complies with the latest safety and
EMC standards, which is perfectly to meet various
regulations worldwide.
APPLICATION
For standard, advanced workstation, server and industrial
power system.
FEATURES
Low Ripple & Noise
Output over voltage protection
Short circuit protection on all outputs
Resetable power shut down
100% burn-in under high ambient temperature(50℃)
Vacuum-impregnated transformer
MTBF:100K hours at 25℃
100% Hi-pot tested
line input fuse protection
W ATTAGE
Wattage: 300W
DIMENSION
Dimension: 140mm(L) x 150mm(W) x
86mm(H)
PRODUCT HIGHLIGHT
Efficiency Lev el: Non-80+
Altitude: N/A
PMBus: For standard, advanced
workstation, server and
industrial power system.
INPUT SPECIFICATION
Input Range: 90-264 Vac
Input F requency : 47-63 Hz
Input Current: 115V@ 7.0 Amps-rms maximum
230V@ 3.0 Amps-rms maximum
GENERAL SPECIFICATION
Effciency: 75%
Voltage
Regulation:
+12V, +5V,: ±5%
-12V, -5V: ±10%
PWOK Delay Time : 500ms > PWOK > 100ms
SAFETY STANDARD APPAOVAL
OUTPUT SPECIFICATION
Hold up Time: 115V/60Hz 17mSec.
Minimum@100% Load,
230V/50Hz 17mSec.
Minimum,@100% Load
Ouput Voltage
Regulation:
+5Vdc output : +5.5 Vdc
minimum, + 6.82Vdc
maximum
+12Vdc output : +13.4 Vdc
minimum, + 15.6Vdc
maximum
Output Rise Time: 115V-rms/230V-rms 5V
20ms Maximum
115V-rms/230V-rms 12V
20ms Maximum
Ripple & Noise: 5V:50mV p-p
12V1:120mV p-p
-12V:120mV p-p
Short Circuit Protection: load < 0.1 Ohm
ENVIRONMENTAL SP ECIFICATION
TEMP.Range: Storage Temperature: -
20°C to + 80℃
MTBF: The power supply have a
minimum predicted
MTBF(MIL-HDBK-217) of
100,000 hours of continuous
operation at 25℃,
maximum-output load, and
nominal AC inout voltage
*Output Voltage and C urrent Rating
+5V +12V1 -12V -5V
Ripple-Noise(R-P) mV 50mV 120mV 120mV 50mV
Regulation Load % ±5% ±5% ±10% ±10%
Output Max.(A) 40A 15A 0.8A 0.3A
Output Min.(A) 2A 1A 0A 0A
NOTES
The +5V and +12V total output shall not exceed 290 watts.
The total output shall not exceed 300 watts
MECHANICAL SPECIFICATION
This conte nt is sub ject to cha nge , ple a se re fe r to spe cification for m ore de tail.
FSP re s e rve the right to cha nge the conte nt witho ut p rio r no tice
IPC PSU
FSP300-40PFB