User manual

27
SMTPinformation,emailaccount,andpassword.Besides,thesenderaccountshould
beallowedforSMTP/POP3forwarding.
Step1SelectViewPowerConfiguration>>Email.RefertoDiagram55.
Diagram55
Step2 EnterSMTPserver,SMTPport,SendfromEmailaddress,Usernameand
password.Clickcheckboxofpasswordauthenticationneededforpassword
verify.
NOTE:IfusingExchangeServerformailboxsystem,it’srequiredtoconfigure
ExchangeserverdomainnameinSMTPseverandselect“Exchange
server”,thenclick“Apply”button.
Step3 EntercorrectemailaccountsinEmailcolumn.Thenclick“Add”toaddinto
receiverslist.Todeleteemailaccount,simplyselectaccountsfromReceivers
listandclick“Delete”button.
Step4 Click“Apply”tosaveallchanges.The“Test”buttoncanbeusedtosendatest
emailtoallreceiverstoconfirmcorrectoperation.Whenthetestemailsare
successfullysenttospecificrecipients,itwillpopupasuccessfulmessageon
operatedPC.Otherwise,itwillpopupafailuredialogtoindicatethereisan
errorforparametersetting.