User manual

30
Diagram57
Step2 Add:EnterMACaddressandclick“Add”buttontoaddinMACList.Delete:
Selectonefromlistandclick“Delete”button.Test:Selectonefromlistand
click“Test”button.ThenitwillexecuteWakeonLANtest.
NOTE:TheMACaddressformatexample:011FC6C7E008.
5.1.6.Com.PortPlugAndPlaySetting
TorealtimemonitorUPSdevice,thesoftwarewillscaneachcom.portanytime.Inthis
way, itwilloccupy com.port. This function will release somecom. portswhich not
connect to UPS devices. To avoid any improper operation, inused com. ports will
displayindisabledgreyicons.Userscanselect“Enable”or“Disable”tocontrolwhether
scancom.portornot.Ifyouallowsoftwarescancom.port.Itwilllisteachcom.port.
Thenuserscanselect“Allowscanned”or“forbidscanned”torescanorreleasecom.
portsbasedontheirrequirements.
Step1:SelectViewPowerconfiguration>>Com.portplugandplaysetting.Referto
Diagram58.
Diagram58
Step2:Click“Refresh”toreloadthestatusofcom.ports.
Step3:Click“Forbidscanned”tostopscanningonthiscom.port.Click“Allowscanned”
tostartscanningonthiscom.port.