User manual

32
Diagram510
Step2 Passwordsetting/changemenuforModBus.Realtimecontrolwillbeavailable
whentheModBuspasswordisthesametotheUPSpassword.
Step3 Com.portsetting:
ThedefaultIDfornominatedcom.portis1;
Selectable baud rates are 1200, 2400, 4800, 9600, and 19200. The default
settingis4800;
Selectabledatabitis7and8.Thedefaultsettingis8;
Selectablestopbitis1and2.Thedefaultsettingis1;
SupportedparityisODDparity,evenparityandNONE.Thedefaultsetting is
NONE.
NOTE:ThisfunctionisonlyavailablefortheUPSwithModBuscommunicationport.
5.2. UPSSetting
5.2.1.LocalShutdown
It’sshutdownsettingforlocalPCwhichisdirectlyconnectedtomonitoredUPSwith
communication port. This configuration enables system shutdown of local PC or to