User manual

35
l Popup dialog before shutdown: Timer setting for popup warning dialog
displayed in local PC. Local PC willpop up a warning dialog before system
startstoshutdown.Therangeisfrom1to999seconds.
l Warning dialog interval: Reminding dialog interval setting. This setting also
appliesforUPSshutdownbecauseofpowerfailure.Therangeisfrom1to999
seconds.
5.2.2.RemoteShutdown
ThisconfigurationistoremoteshutdownspecificPCswhicharepoweredbymonitored
UPS.
Step1 SelectUPSSetting>>RemoteShutdown.RefertoDiagram512.
Diagram512
Step2 Selectremoteshutdownconditions.
Step3 Add/DeleteremotesystemIPaddress.
Step4 Click“Apply”buttontosavealldata.
NOTE:Click“Default”buttontorecoverthedefaultsetting.
Conditions:
l WhentheUPSisrunningfrombattery,shutdowntheremotesystemsafterxx
minxxsec:Whenclickingthecheckbox,remotesystemswhicharepoweredby