User manual

36
monitoredUPSwillshutdownaftermonitoredUPSrunningonbatterymodefor
xx min xx sec. The maximum setting number for minutes is 999, and for
secondsis59.
l Immediately shut down the following remote systems when the battery is
runninglow:Whenclickingthecheckbox,remotesystemswhicharepowered
bymonitoredUPSwillshutdownwhenmonitoredUPSisatlowbatterylevel.
5.2.3.ParameterSetting
SomeUPSfunctionscanbesetandchangedviasoftware.Parametersettingincludes
backup time setting for P1, battery number setting, voltage and frequency range
settingforbypassmode,andvoltagerangesettingforECOmode.
Step1 SelectUPSSetting>>ParameterSetting.RefertoDiagram513.
Diagram513
NOTE:ThisscreenmaybedifferentfordifferenttypesofUPSs.
Step2 Selectthefunctionsbyclicking“Enable”or“Disable”button.Orchangethe
numbersbyclickingupdownarrowsormodifythenumbersdirectlyinthe
numbercolumn.