User's Manual

For more information about how to use and program the Programmable IR Remote Control, see the Tobii Dynavox Snap
+ Core First User’s Manual or the Communicator User’s Guide.
If the device you are trying to control is not responding, try tilting the Tobii Dynavox I-Series device up or down
slightly to change the angle at which the IR signal is being sent.
The ECU is not to be relied on as the only method of interaction with IR controlled devices.
5.7 Adjusting the Volume
To adjust the volume use the Volume Up button (Position 8) and volume down button (Position 9) on the bottom right hand
side of the front of the Tobii Dynavox I-Series device. For position references, see Figure 3.1 Front
Volume adjustments can also be done in your Tobii Dynavox communication software.
5.8 Adjusting the Sound
You can configure the built-in speakers using the Microsoft Windows Control Panel > Sound.
We refer to Microsoft’s information on how to configure the sound in the Microsoft Windows Control Panel.
5.9 Tobii Dynavox Hardware Settings
With the Tobii Dynavox Hardware Settings it is possible to customize the some behavior of the Tobii Dynavox I-Series. To
access the Tobii Dynavox Hardware Settings follow this procedure:
1. Select the Tobii Dynavox Hardware Settings app,
, from the Start screen.
2. The Tobii Dynavox Hardware Settings opens.
5.9.1 Adaptive Buttons
The touch behavior of the of the Adaptive buttons can be set and changed here. The Eye Gaze behavior for the adaptive
button are set in you Tobii Dynavox communications software.
5.9.1.1 Triangle Button
To change and select the touch action for the Triangle button.
#12004244 Tobii Dynavox I-Series User’s manual v. - en-US
5 Using the Tobii Dynavox I-Series
35