User's Manual
Table Of Contents
- 1 Introduction
- 2 Safety
- 3 Overview of the Tobii Dynavox I–13 and I–16
- 4 Batteries in the Tobii Dynavox I-Series
- 5 Using the Tobii Dynavox I-Series
- 6 Product Care
- Appendix A Support, Warranty, Training Resources and Trouble-shooting
- Appendix B Compliance Information
- Appendix C Computer Device States of Operation and LED Status
- Appendix D Technical Specifications
- Appendix E Maximum Allowed Temperature
- Appendix F Approved Accessories
5.9.3 Switches
5.9.3.1 Enabling a Connected Switch
To enable a connected Switch to power on the device:
1. Open the Tobii Dynavox Hardware Settings> Switches.
2. Make sure the Enable switch “1 or 2” to act as Power On Button is toggled On.
5.9.3.2 Disabling a Connected Switch
To disable a connected Switch to power on the device:
1. Open the Tobii Dynavox Hardware Settings> Switches.
2. Make sure the Enable switch “1 or 2” to act as Power On Button is toggled Off.
5.9.4 Touch & Gestures
5.9.4.1 Edge Swipe
Edge Swipe is “enabled” by default. Edge Swiping will bring up the quick “Action Center” menu from the right side of the
screen.
#12004244 Tobii Dynavox I-Series User’s manual v. - en-US
5 Using the Tobii Dynavox I-Series
37