Operation Manual

ManualsBrandsFTE Maximal ManualsDigital ReceiverMAX IP S100

User’s manual · MAX IPS100

Technical changes and mistakes reserve - 1 - MAX IPS100 Version en_1.0 FTE Maximal

Table of contents

0. Control elements and connections.......................................................................................................................3

0.1. Receiver front panel ......................................................................................................................................3

0.2. Receiver back panel ......................................................................................................................................3

0.3. Remote control ..............................................................................................................................................4

1. First installation......................................................................................................................................................5

1.1. Complete Content..........................................................................................................................................5

1.2. Accessories and installation examples .......................................................................................................6

1.3. Safety rules ....................................................................................................................................................7

1.4. Fast installation guide...................................................................................................................................8

1.5. Menu overview.............................................................................................................................................13

2. Standard functions...............................................................................................................................................14

2.1. Switch on the receiver................................................................................................................................. 14

2.2. StandBy........................................................................................................................................................14

2.3. Teletext.........................................................................................................................................................14

2.4. MUTE ............................................................................................................................................................14

2.5. Numeric block on remote control...............................................................................................................14

2.6. Switch channels...........................................................................................................................................14

2.7. Change between TV- and Radio channels.................................................................................................14

2.8. Vol+/Vol- Volume ........................................................................................................................................14

2.9. Stop the functions .......................................................................................................................................14

2.10. Open Main menu......................................................................................................................................15

2.11. Watch the last viewed channel...............................................................................................................15

2.12. Channel list..............................................................................................................................................15

2.13. EPG Electronic Program Guide..............................................................................................................15

2.14. Favourite channel list..............................................................................................................................16

2.15. Menu Audio..............................................................................................................................................16

2.16. Signal and Channel information.............................................................................................................16

2.17. Changing favourite channels .................................................................................................................16

2.18. Zoom Function.........................................................................................................................................16

2.19. Subtitles ...................................................................................................................................................16

2.20. Direct buttons in the streaming function...............................................................................................16

2.21. Short-circuit protection...........................................................................................................................17

3. Channel management..........................................................................................................................................18

3.1. TV-Channel list.............................................................................................................................................18

3.1.1. Skip channels......................................................................................................................................18

3.1.2. Lock channels .....................................................................................................................................18

3.1.3. Delete channels...................................................................................................................................19

3.1.4. Delete channel groups or all channels..............................................................................................19

3.1.5. Edit channels.......................................................................................................................................19

3.1.6. List of favourite channels...................................................................................................................19

4. Timers ...................................................................................................................................................................20

4.1. Sorting..........................................................................................................................................................20

4.2. Delete Timer.................................................................................................................................................20

4.3. Edit / Add timer ...........................................................................................................................................20

5. Tools .....................................................................................................................................................................22

5.1. Calculator.....................................................................................................................................................22

5.2. Calendar .......................................................................................................................................................22

6. CAS Management.................................................................................................................................................23

Summary of content (34 pages)

PAGE 1
User’s manual · MAX IPS100 Table of contents 0. Control elements and connections....................................................................................................................... 3 0.1. 0.2. 0.3. 1. First installation...................................................................................................................................................... 5 1.1. 1.2. 1.3. 1.4. 1.5. 2. Complete Content.......................................................................
PAGE 2
User’s manual · MAX IPS100 7. System Settings ................................................................................................................................................... 24 7.1. 7.2. 7.3. 7.4. 7.5. 7.6. 7.7. 7.8. 7.9. 8. Menu Language ........................................................................................................................................... 24 Audio Language............................................................................................
PAGE 3
User’s manual · MAX IPS100 0. Control elements and connections 0.1. Receiver front panel 1 2 3 4 5 6 7 1 POWER: Switches the receiver ON or in Standby mode. For total switching off, use the main switch at the back side of the receiver. 2 POWER LED: Indicates that the mains voltage (90-230 VAC) is available. 3 LOCK LED: Indicates a sufficient signal level at the input 4 DISPLAY: 4 Digits to display the program numbers.
PAGE 4
User’s manual · MAX IPS100 0.3. Remote control 1. POWER: Switches receiver ON or in stand-by-mode 2. TEXT: Open and close teletext 3. MUTE: Switches audio on and off 4. NUMERIC BLOCK: For direct typing values and names 5. CH+ CH-: Changes channel up and down 6. VOL+ VOL-: Adjusts audio volume up and down 7. TV/R: Switches between TV and Radio Channels 8. EXIT: Exit menus or stop operations 9. MENU: Opens the main menu 10. BACK: Watch the last viewed channel 11.
PAGE 5
User’s manual · MAX IPS100 1. First installation 1.1. Complete Content The following goods must be included in this package when you open it for the first time. Remote control Installation guide Two batteries type AAA, Micro, 1,5V CDROM Technical changes and mistakes reserve -5- MAX IPS100 Version en_1.
PAGE 6
User’s manual · MAX IPS100 1.2.
PAGE 7
User’s manual · MAX IPS100 1.3. Safety rules Please read the manual carefully before using the receiver. You will receive a lot of information to use this product correctly and you will prevent incidents. Please keep the manual on a safe place. CAUTIONR RISK OF ELEKTRIC SHOCK DO NOT OPEN This sign warns you about high voltages, with risk of electric shock Caution: Do not open the housing of this receiver. Repairs can only be made by professionals authorized by Fte maximal.
PAGE 8
User’s manual · MAX IPS100 1.4. Fast installation guide Please, follow the instructions for a faster and simpler installation of the receiver. Step 1: Connections Connect the ETHERNET input of the receiver to the network. Connect the cable from the LNB and Dish: Connect the cable with the Satellite signal to the IF IN input of the receiver.
PAGE 9
User’s manual · MAX IPS100 Time Zone: In order to the receiver is able to display the correct time and adjust the timer recordings correctly, it is needed to fix the time zone to the place you live. Select here the time delay according to your position comparing to Greenwich Time. In UK: Summer time: +1 hours Winter time: GMT hour Select with the arrow buttons and press the OK button.
PAGE 10
User’s manual · MAX IPS100 Channel Search: Satellite Once the antenna configuration is completed, you should proceed to tune the satellite channels that you have selected. There are different ways to tune the channels: through LNB, through Satellites and through Transponders. When you select the channel searching through LNB, you only can select one LNB, which corresponds to the programmed tuner.
PAGE 11
User’s manual · MAX IPS100 Network Configuration The receiver will require the introduction of the needed parameters to be able to get connected to a network, as well as to be visible to other equipments so that receive streaming of video and audio. You should introduce the following parameters: IP Address Number of 32 bits expressed in 4 numbers between 0 and 255 which identifies the receiver inside its network.
PAGE 12
User’s manual · MAX IPS100 Current Channel It allow you to fix the number of transponder that is going to be sent t othe destination receiver. No: Always will be sent to the receiver at destination the indicated cannel in the field Channel, and the origin receiver only will be able to see any cannel belonging to the same transponder which is indicated in the Channel field, or IP channels. When you see an IP channel, the streaming sending process will stop.
PAGE 13
User’s manual · MAX IPS100 1.5. Menu overview Main menu Channel Management Parental Control Move, rename or delete channels, Program and, create favourite list. Tools Calculator, Calendar with date management Timers Manual activation for timer events.
PAGE 14
User’s manual · MAX IPS100 2. Standard functions 2.1. Switch on the receiver The receiver has a main switch at the back panel. To switch on, take the switch in position 1. Now the receiver begins to run and show information on its display. 2.2. StandBy To switch the receiver from Standby (sleep mode) to the working mode, press Orange Power button on the left corner at the top of the remote control.
PAGE 15
User’s manual · MAX IPS100 2.10. Open Main menu To open the main menu, you have to press the button MENU. The menu system is made in a tree structure. 2.11. Watch the last viewed channel With the Back button, you can access to the channel viewed previously. 2.12. Channel list When all the menus are closed, you can open a channel list by pressing the button OK. With the button TV/R you can switch between TV and Radio channels.
PAGE 16
User’s manual · MAX IPS100 2.14. Favourite channel list If no menu is opened, you can get your favourite channels list by pressing the button FAV. With the buttons Pup / Pdw you can switch between 8 different lists, if you have marked channels before. With the buttons you can select a channel from this list. 2.15. Menu Audio If all menus are closed you can open the menu Audio by pressing the button Audio. You can change here the audio output in Stereo, Left and Right audio format.
PAGE 17
User’s manual · MAX IPS100 2.21. Short-circuit protection If you see one message like this, you have a short circuit or to high power in the antenna system. In this case switch off the receiver and check the system. The displayed information stops automatically when the problem is solved. Technical changes and mistakes reserve - 17 - MAX IPS100 Version en_1.
PAGE 18
User’s manual · MAX IPS100 3. Channel management 3.1. TV-Channel list Here you will find an overview about all channels. Channels can be administrated, moved, deleted or blocked. The navigation is with the buttons and . With the button TV/R you will switch between TV and Radio channels. With the button LIST you can sort this list as follows: POS, Position in channel list Name, alphabetically FTA / CAS sort by free or coded channels To see the PID information, you have to press the button TEXT.
PAGE 19
User’s manual · MAX IPS100 3.1.3. Delete channels If you want to delete one channel, you have to select it and then press the Red button Delete. Doing this, you see now one symbol like one the right side. You can mark more than one channel, the channels will be deleted when you close the Channel Management. 3.1.4. Delete channel groups or all channels If you want to delete a channel group or all channels, you have to select them and than press the Green button Del. Group.
PAGE 20
User’s manual · MAX IPS100 4. Timers In menu Timers you get one overview about all events which you have programmed. These events can be store over EPG or direct in this menu. Menu options List with all events including channel name and name for the event Start date and time selected of event Frequency and PID information for the selected event Menu options 4.1. Sorting For having a better view, you can sort the events. Please press for this the button LIST.
PAGE 21
User’s manual · MAX IPS100 Title You can modify an existing title or create a new one. buttons. If you want to change it, select this line by The keyboard handling is like in a mobile phone. When you press one button several times you will have different results. Example: If you press button 2: a, b, c and 2 you can move the cursor in its position. With the arrow buttons In this menu, the Green button changes between normal and capital letters and the RED button deletes letters.
PAGE 22
User’s manual · MAX IPS100 5. Tools In this menu you can find two little helper tools. The calculator is useful for fast calculations and with the calendar you can mark dates for special events like birthdays. 5.1. Calculator The using of the calculator is very easy. With numeric block remote control, input the numbers. For the calculations you use the colour buttons. Red Button Green Button Yellow Button Blue Button Addition Subtraction Multiplication Division The button OK is used for = function.
PAGE 23
User’s manual · MAX IPS100 6. CAS Management In this option, you can access to the information about the conditional access system Follow the steps showed on menu in order to access to the card data. If there is no card or is incorrectly inserted, an error alert will be shown on TV. With a card, information about the card will be showed. Technical changes and mistakes reserve - 23 - MAX IPS100 Version en_1.
PAGE 24
User’s manual · MAX IPS100 7. System Settings In the menu System Settings you will find all basic adjustments of the Receiver. 7.1. Menu Language Here you can choose the language which will be shown in the receiver. You can select: English, German, French, Spanish, Italian, Portuguese Please select with the buttons and then press OK. 7.2. Audio Language Here you can choose the audio language for the TV and Radio channels.
PAGE 25
User’s manual · MAX IPS100 7.4. TV Settings Here you can adapt your receiver to your TV set and you can select the screen format. TV-System Select here which TV system your TV set support. Selection: NTSC, PAL, Secam and AUTO . Please change with the buttons TV-Format Select here which TV format your TV set has available. Selection: 4:3, 16:9 and AUTO, please change it with the buttons . RF Mode Not available in this model. RF Channel Not available in this model.
PAGE 26
User’s manual · MAX IPS100 You have to select the same position in the receiver than in the remote control. Info bar delay Here you can select how long the information of the OSD will be displayed on the screen. Selection: 1 to 10 sec. . Please change it with the buttons Number of Sequential Channel Selecting Yes in this option, the positions of the channels will be occupied continuously and sequentially.
PAGE 27
User’s manual · MAX IPS100 8. Parental Control With this menu, you can activate the parental control where is necessary to give one password before opening channels or making settings. 8.1. Set Lock To activate the parental control, select with button Set Lock and then press . You have to give the standard code 0000 or your individual one with the numeric block from the remote control. Then press OK button. 8.2.
PAGE 28
User’s manual · MAX IPS100 9. Installation Over this menu you can search for new channels Channel Search, modify the frequency list MUX Management, or make backups. 9.1. Antenna configuration: In this menu you should configure the signals that are connected at the inputs IF IN of your PVR. By default, the equipment comes with the configuration that you can see in the Picture with four satellites. The available options in this screen allow: Red button: Deletes the selected satellite.
PAGE 29
User’s manual · MAX IPS100 9.2. Channel Search: Satellite Once the antenna configuration is completed, you should proceed to tune the satellite channels that you have selected. There are different ways to tune the channels: through LNB, through Satellites and through Transponders. When you select the channel searching through LNB, you only can select one LNB, which corresponds to the programmed tuner.
PAGE 30
User’s manual · MAX IPS100 9.3. Satellite Management Your receiver are provided with a very important pre-stored satellite list, if in addition you want to add some one more or to change the parameters of some channels, these functions are made through this menu. The available options are: Delete Satellites If you want to delete one satellite, you can do it with the Red (Delete) key.
PAGE 31
User’s manual · MAX IPS100 The options you have right with the list are the following ones: Delete Transponder: The RED key allows you to make a multiple selection of transponders to be deleted. When you select a TP, it will appear the icon in its column, when you exit of the menu, you will be requested to confirm the changes. Edit Transponder: This function with the GREEN key will allow you to vary the parameters of the transponder. You can change the frequency, polarity, symbol rate and FEC.
PAGE 32
User’s manual · MAX IPS100 9.6. Network Configuration The receiver will require the introduction of the needed parameters to be able to get connected to a network, as well as to be visible to other equipments so that receive streaming of video and audio. You should introduce the following parameters: IP Address Number of 32 bits expressed in 4 numbers between 0 and 255 which identifies the receiver inside its network.
PAGE 33
User’s manual · MAX IPS100 Yes: the receiver will send the channel which is tuned locally. Every time you change the channel in the receiver, you must tune the same in the destination receiver. Channel: Service to be sent. Only available when you select No in the field Current Channel. You can move through the menu with the buttons With the Red button you delete the last character. Press OK to save the changes. and . 9.8.
PAGE 34
User’s manual · MAX IPS100 10. The equipment of the receiver 10.1. Technical data The features of a digital receiver depend only on a part of its hardware / electronic components. A big part of the functions are made by the software.