MAX S402PVR
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to “dangerous voltage” and to prevent from a risk of electric shock. Warning: To reduce the risk of electric shock, don’t open the cabinet. Refer servicing to qualified personnel only. The exclamation point within an equilateral triangle is intended to alert the user to important operating and maintenance (servicing). Please read the manual carefully before installing the receiver.
QUICK INSTALLATION GUIDE QUICK INSTALLATION GUIDE FOLLOW NEXT STEPS FOR THE CORRECT INSTALLATION OF THIS RECEIVER. STEP 1: CONNECTIONS Example 1 – Basic System rev 1.2 Example 2 – DISEqC switches Example 3 – Combined with terrestrial PAG. 3 Example 4 – Motorized system ENGLISH The coaxial cable, with satellite signal, must be connected to the “IF IN” connector. The “TV SCART” connector must be connector to the TV set. The receiver also includes an UHF modulator, allowing connecting a TV set or VCR.
QUICK INSTALLATION GUIDE STEP 2: BASIC CONFIGURATION OF THE RECEIVER Language: press [ ] to select languages. The selection of languages include: English, German, French, Spanish, Italian, Portuguese, Turkish, Polish, Russian, Danish, Greek, Hungarian, Arabic, Farsi. First Audio: Some channels offer more than one audio language. This function allows you to set the preferred audio language for those channels using [ ].
QUICK INSTALLATION GUIDE recommend you to contact your installer or to refer to the user manual of this system to get the correct information. Single search: You can edit the following items (Image 2): IMAGE 3 PAG. 5 ENGLISH rev 1.2 IMAGE 2 1. Satellite: Press [ ] to switch Satellites or press [OK] to enter satellite list to select directly. 2. LNB Configuration: Selecting this option and pressing [OK], the LNB Configuration menu will be displayed.
QUICK INSTALLATION GUIDE ENGLISH IMAGE 4 Multi search: You can edit the following items (Image 4): 1. On “Satellite” item press [OK] to open the satellite list. Then press [ ] to move the highlight and press [OK] to mark/unmark and [EXIT] to finish the selection. You can select several satellites in this menu. At the bottom of the screen you can see the selected satellites. The system will use DiSEqC1.0/1.1, DiSEqC1.2 and USALS functions to search the marked satellites and scan channels. 2.
QUICK INSTALLATION GUIDE GMT has to be turned off. NOTE: If the current channel provides the correct time information, you will see the current time after you entered “Time” menu. If the channel doesn’t provide time information, you have to input the date and time information manually. The most channels support the time signal. 5. Show time: Use [ ] to switch on/off this option. When the option is enabled, the time will be displayed at the TV in a frame in the top right margin. 6.
QUICK INSTALLATION GUIDE TV Channel List: This option shows the list of TV stored channels. Radio Channel List: This option shows the list of Radio stored channels. Channel Setup: This option allows setting the receiver to start in a predefined channel. Delete All: This option deletes all TV and Radio stored channels. Restore channel list and settings: This option loads the user TV and Radio channel list, saved previously.
QUICK INSTALLATION GUIDE Language: This option allows choosing the language of the menus. TV System: This option allows choosing the video Standard and other parameters of the screen. Time & Timer Setting: Timer setting menu. OSD Setting: This option allows configuring the subtitles of the channel information. Power setting: Turns on or off the LNB power or enable / disable Low Power Consumption mode. RCU position Switch: To chose the RCU position of the remote control.
Safety Precaution Caution…..…………………...............................………………………………………………13 1. Panel & Remote Control Description 1.1. Front Panel Description…….......................................…………………………14 1.2. Rear Panel Description……................................………….…………………..14 1.3. Remote Control Description…...............................................…………………………..15 2. Basic Operations 2.0. Switch on STB……………………….....................................………………………………...16 2.1. Standby ……………………..........
INDEX rev 1.2 PAG. 11 ENGLISH 3.1.4.4 Edit..........................…………………...………………………...24 3.1.5. Find…………….........................……………………..……..………………..…….24 3.2. Radio Channel List……..................................……………………………………......25 3.3 Channel Setup…………..................................………………………………......25 3.3.1. Start-up Channel……………................................……………………………......25 3.3.2. Channel Play Type………........................…………………………………......25 3.4. Favourite Channel List Name…….
7. DVR Management 7.1. Recording management.............................................................................................42 7.1.1. How to reproduce a recording..........................………………………………42 7.1.2. How to rename a recording.................……………………………………42 7.1.3. How to block a recording………….............…………………………43 7.1.4. How to delete a recording..................……………………………………43 7.1.5. How to delete all recordings..................…………………………43 7.2. HDD Control.....................
SAFETY PRECAUTION Warning: To reduce the risk of electric shock, don’t open the cabinet. Refer servicing to qualified personnel only. The exclamation point within an equilateral triangle is intended to alert the user to important operating and maintenance (servicing). Please read the manual carefully before installing the receiver. Caution: Never open the device by yourself. Dangerously high voltages are present inside the unit. Refer servicing to qualified staff only.
PANEL & REMOTE CONTROL DESCRIPTION 1. PANEL & REMOTE CONTROL DESCRIPTION 1 23 4 5 6 7 1. POWER: Switches the receiver on, or enters standby mode. To completely switch off the receiver, you have to use the switch on the back of the receiver. 2. STAND-BY-LED: Shows if the receiver is in Standby mode (when LPC mode is ON). 3. LOCK LED: Indicates a sufficient signal level at the IF IN input. 4. DISPLAY: 4 Digits to display the program numbers. 5.
PANEL & REMOTE CONTROL DESCRIPTION 1 3 6 8 10 16 17 19 22 21 26 25 29 30 33 7 9 12 11 13 15 18 20 23 24 27 28 31 32 34 35 ■ rev 1.2 ■ PAG. 15 ENGLISH 14 2 4 5 1.- POWER: Switches receiver ON or in stand-by-mode. 2.- LEDs: Shines as function control, showing the selected transmission code 1, 2 or 3. 3.- TV/R: Switches between TV and Radio channels. 4.- CODE: Changes transmission code of the remote control. 5.- MUTE: Switches audio on and off. 6.- NUMERIC KEYS: For direct typing values and names.
BASIC OPERATIONS 2. BASIC OPERATIONS 2.0. SWITCH ON STB Switch the [Device’s Main Power] switch on. When the STB is first used it will display the quick setup page where the receiver can be configured quickly. For further use the STB will play the same channel as last time when it was switched off.
BASIC OPERATIONS 2.3. MUTE OSD 2 1. Press the [Mute] button to mute the sound. On the screen an icon will be displayed to indicate the muted sound (OSD 2). 2. Press the [Mute] button again to restore the sound. 2.4. CHANNEL NUMBER In TV mode you can enter the channel number directly with your remote control unit and confirm the number with the OK button to change to the desired channel. In TV mode, press [0] button to enter the Multi-Picture mode (OSD 3). 1.
BASIC OPERATIONS OSD 4 OSD 5 OSD 6 In TV mode press [OK] button to open the Channel List window. Reduced Channel List (OSD 4): ] keys to navigate this list. You can use [ 1. Press [Yellow] button to open the SAT list. After selecting a satellite the channel list will be reduced to the channels of this satellite. 2. Press [Blue] button to open the “Find” window. You can use this feature to find channel by their names. 3. Press [Red] button to open the expanded channel list. 4.
BASIC OPERATIONS and date of this event. (To program a recording, the event does not have to be started). 4. To close the EPG menu press [Exit]. 2.14. LIST In TV mode, press [List] button to access directly to the “TV Channel List” menu or to the “Radio Channel List” menu. 2.15. FAVOURITES OSD 9 ? FREQUENTLY ASKED QUESTION Q: Why the screen displays “No Favourite Channel” after pressing the [Favourite] button? A: No channels have been assigned to a Favourite Group yet.
BASIC OPERATIONS 2.21. LNB SHORT When LNB is short, it will notify user on screen “LNB Short!” (OSD 14). Please check your cables and connections for shorts. When the short is removed the warning message will disappear. OSD 14 2.22 CODE It shows and changes the selected code on the remote control. This code has to correspond with the one selected on the receiver’s menu. (Chapter 5.7) ENGLISH 2.23. REC To start the recording (OSD 15).
BASIC OPERATIONS In order to stop a recording before the ending of the programmed length, press the [Stop]-Key. A new window will be shown in order to confirm the end of the recording (OSD 16). If you press the Key [Rec], the recording will continue. Press the key [Stop] again to end the recording manually, if you want to end the recording before the programmed length. 2.24. PVR OSD 16 It opens directly the recording administration menu (Chapter 7.1). 2.25. TIME SHIFT ■ ■ 2.26.
CHANNEL 3. CHANNEL ENGLISH OSD 20 Press [Menu] in the TV mode to enter the main menu (OSD 20). ] to select the Channel item. 1. Press [ 2. Press [OK] to enter the selected item. In the Channel menu (OSD 21): 3. Press [ ] to select the wanted menu item. 4. Press [OK] to enter the selected item among. - TV Channel List - Radio Channel List - Channel setup - Favourite channel list name - Delete All - Restore channel list and settings - Save channel list and settings 3.1.
CHANNEL 3.1.2. MOVE OSD 24 1. To move/change channels: Pushing the [Red] button, you will see a picture like OSD 24. You will be able to move or change the position of the channels: - Push again the [Red] button to move the channel. - Push the [Green] button to change the position of the channel. 2. Move the channel to the desired position with [ ]. Press [OK] to confirm the position. OSD 25 1. Press [Green] to open the Sort window (OSD 25). Press [ ] to select and [OK] to confirm your choice. 2.
CHANNEL this menu. OSD 30 3.1.4.3 LOCK In Channel Edit menu, press [Yellow] button to place a Lock icon behind the name of the highlighted channel. Marked channels (OSD 30) will be locked and displayed only after password has been entered if you confirm to save the changes when you leave this menu. OSD 31 OSD 32 OSD 33 Pressing the [Blue] button in the TV Channel List Edit menu will open another window where you can choose between Edit the actual channel or create a new channel (OSD 31). 1.
CHANNEL 3.2. RADIO CHANNEL LIST Basically the operation of “Radio Channel List” is same as “TV Channel List”, except that in the small channel window the Fte Logo will be displayed (OSD 35). 3.3. CHANNEL SETUP OSD 35 When you enter the “Channel Setup” menu you will see a screen like beside (OSD 36): OSD 36 Press [OK] to enter “Start-up Channel” menu to see the screen like showed beside (OSD 37): 1. If you set of “Boot on Channel” to “On” you can edit the following two items.
CHANNEL 2. After entering the password correct a safety question will show up where you have to confirm first (OSD 41). 3. Select “Yes” to delete all channels or “No” to cancel and confirm with [OK]. 4. In step 2 and step 3, pressing [Exit] will exit the function directly without saving. ENGLISH OSD 40 ? FREQUENTLY ASKED QUESTION Q: IF I incautiously delete all channels, what should I do? A: There are three ways to restore: - To re-search all channels at the “Installation” menu.
INSTALLATION 4. INSTALLATION OSD 44 4.1. SINGLE SEARCH OSD 45 rev 1.2 OSD 46 After selecting Antenna Setup another window will be opened (OSD 46). You can edit the following items: 1. Satellite: Press [ ] to switch Satellites or press [OK] to enter satellite list to select directly. 2. LNB Configuration: Selecting this option and pressing [OK], the LNB Configuration menu will be displayed (OSD 47).
INSTALLATION ENGLISH OSD 48 3. DiSEqC1.0: Use [ ] to switch the options of DiSEqC switches. 4. On “TP Index” item use [ ] to select the desired transponder. 5. In the “FTA Only” item, press [ ] to select to scan only free channels or even scrambled channels. If you select “Yes” it will scan free channels only. 6. In “Scan Channel” item, press [ ] to select to scan TV + Radio Channels, or just TV channels or just Radio channels. 7.
INSTALLATION 4.3. TP SCAN OSD 52 rev 1.2 OSD 54 OSD 55 PAG. 29 ENGLISH OSD 53 When you enter “TP Scan” menu a window like the one beside will be displayed (OSD 52): ] to select the satellite 1. On “Satellite” item, press [ you want to scan or press [OK] to open the satellite list for selection. 2. On “TP Index” item use [ ] to select the desired transponder.
INSTALLATION will search the selected TP. In case you select “On”, the NIT (Network Identification) will be identified and the receiver will automatically search all the TP of this network. 6. Press [OK] to start scanning. 7. On the “TP Scan” item, press [Exit] to cancel the scanning and saving the found channels. 4.4. SATELLITE LIST OSD 57 OSD 58 OSD 59 OSD 60 When you enter the “Satellite List” menu you can see a window like the one beside (OSD 56): ] and mark/ 1.
SYSTEM SETUP 4.6. SATELLITE GUIDE OSD 61 OSD 62 rev 1.2 OSD 63 OSD 64 PAG. 31 ENGLISH When you enter “Satellite Guide” menu, you will see the screen like beside (OSD 63). Here you can enter your local longitude and latitude and the satellite’s longitude. The receiver calculates the antenna’s azimuth and elevation to point your antenna to the selected satellite. 1. Use the [Number] buttons to input the values of “Local Longitude”, “Local Latitude” and “Satellite Longitude”. 2.
SYSTEM SETUP 5. SYSTEM SETUP ENGLISH OSD 65 Press [Menu] in the TV mode to enter the main menu (OSD 65). ] to select the System Setup item. 1. Press [ 2. Press [OK] to enter the selected item. In the System Setup menu (OSD 66): 3. Press [ ] to select the wanted menu item. 4. Press [OK] to enter the selected item among. - Language - TV System - Time & Timer Setting - OSD Setting - Parental Lock - Power setting - RCU Position Switch 5.1. LANGUAGE OSD 67 5.2.
SYSTEM SETUP 5.3. TIME & TIMER SETTING rev 1.2 When you enter “Time” “Local Time Setting” or “Sleep Timer” a menu with three items will be opened (OSD 69). Use [ ] to select between the three options and confirm with [OK]. OSD 69 5.3.1. TIMER OSD 70 Select “Timer” item and press [OK] to enter the “Timer list” menu (OSD 70). The current time will be displayed in the first column. If the current time is incorrect, please modify it with the [Number] buttons at the “Time” menu. 1.
ENGLISH OSD 71 OSD 72 (that way, you will assign the alarm function to a concrete TV or Radio channel) or “Message mode” (creating a text message that will appear on the screen). 4. “DVR Recorder” / “Radio Recorder” option: If you select this option, the following fields of the image will be shown in order to be configured (OSD 71). - Start channel: Press [OK] to open the channel list and select the channel you want to record. By default, when you enter this option, it shows the current tuned channel.
SYSTEM SETUP OSD 73 5.3.2. LOCAL TIME SETTING OSD 74 OSD 75 When you select “Local Time Setting” and press [OK] then you will see a window like the one beside (OSD 74): 1. GMT Usage: This item is used to set the time by using the time signal from the satellite. Press [ ] to change the setting. 2. The “GMT Offset” item is only available when “GMT Usage” is set to “On”. Press [ ] to set the “GMT Offset” value.
SYSTEM SETUP If you set a sleep time, the system will change to Standby mode after the chosen time period. 5.4. OSD SETTING ENGLISH OSD 77 When you select “OSD Setting” you will see a screen like beside (OSD 77): 1. Subtitle Display: Press [ ] to select “On” or “Off”. If the current channel has subtitle information, it will be displayed if this function is “On”. If this function is “Off” subtitles won’t be displayed. 2.
SYSTEM SETUP need to use the new password to open locked menus or locked channels. NOTE: The default password is 0000 5. Press [Exit] to leave the “Parental Lock” menu. 5.6. POWER SETTING OSD 79 5.7. RCU POSITION SWITCH In order to avoid interferences between remote controls, you have the possibility to change the code of it, to do that you have to change the position of a switch in the remote control. But first of all you have to change this code in the receiver.
TOOLS 6. TOOLS ENGLISH OSD 82 Press [Menu] in the TV mode to enter the main menu (OSD 82). ] to select the Tools item. 1. Press [ 2. Press [OK] to enter the selected item. In the Tools menu (OSD 83): 3. Press [ ] to select the wanted menu item. 4. Press [OK] to enter the selected item among. - Information - Quick Setup - Game - Factory Default - Software Upgrade - SatcoDX Auto Programing - Smartcard - CI 6.1. INFORMATION OSD 83 1.
TOOLS 6.3. GAME When you enter “Game” menu, you will see three Games include Tetris, Snake and Othello (OSD 86). 6.3.1. TETRIS OSD 86 6.3.2. SNAKE 1. Mark “Setup” and press [ ] to select the level (speed). 2. Mark “Start” and press [OK] to start the game. 3. Mark “Cancel” and press [OK] to leave the game. 4. Play the game: - Press [ ] to guide the snake to the red blocks. Every block you ate increases the length of the snake. If the snake runs against a wall or against itself then it dies.
TOOLS 6.5. SOFTWARE UPGRADE There are two ways of upgrading the software of the receiver as you can see at OSD 88. 6.5.1. RS232 UPGRADE OSD 89 OSD 90 6.5.2. UPGRADE BY SATELLITE This function can upgrade the software of your receiver through data sent by a satellite. At the moment we offer satellite updates only through ASTRA1 satellite. 1. Select the satellite and TP or input the TP value and download PID. 2. Then mark “Start” and press [Enter] to begin the download of the upgrade (OSD 90).
TOOLS 6.6. SATCODX AUTO PROGRAMMING OSD 92 6.7. SMART CARD In this option, you can find information about the conditional access system. If there is no card or it is placed incorrectly, information about “No card” o “Unknown” will be showed on the screen. With a FELEC-CAS card, information about the card will be showed (OSD 93). Note: Card must be inserted with chip in upper side. OSD 93 6.8. CI In this menu option you will find information in referrence with the Conditional Access.
DVR MANAGEMENT 7. DVR MANAGEMENT ENGLISH OSD 96 Press the key [Menu] on the remote control to go to the main menu (OSD 96). ] to settle the 1. Press the arrows on the remote control [ option of DVR management. 2. Press [Ok] to enter the submenu DVR Management In the submenu DVR management (OSD 97): 3. Press the keys on the remote control [ ] to move to the different options on the menu. 4. Press [Ok] to go to the selected option on the submenu. - Recording management - HDD Control - HDD Information 7.1.
DVR MANAGEMENT - Press the [Exit] key to leave. A window will ask for confirmation to save the changes. 7.1.3. HOW TO BLOCK A RECORDING OSD 100 7.1.4. HOW TO DELETE A RECORDING OSD 101 To delete one or more recordings, press the [Yellow] key on the recording you want to delete (if you want to delete several recordings, select them one by one). - A window appears and asks for the password to delete a recording. If it has not been modified, it is by default the code “0000”.
DVR MANAGEMENT 7.2.- HDD CONTROL In this menu you can find the options “HDD stand-by timeout”, “Jump Step Value” and “Format HDD” (OSD 103). 7.2.1. HDD STAND-BY TIMEOUT OSD 103 It is used to settle the time in minutes after which the hard disk will be turned into stand-by mode. The options are: Deactivated (will never be in Stand-by), 5, 15 or 60 minutes. ENGLISH 7.2.2. JUMP STEP VALUE With this option you can settle the jump marks forward and reward.
TECHNICAL SPECIFICATION VIDEO Decoding Bit rate Output Aspect ratio Active pixel Output connector MPEG-2 & MEPG-1 compatible Max 15Mbps PAL/NTSC 4:3, 16:9, Auto 720x480 @ 30fps; 720x576 @25fps Scart / RCA AUDIO Decoding Mode Bit rate Output connector MPEG-2/MPEG-1 layer I & II Mono, Dual, Stereo, Joint stereo Max 384Kbps Scart / RCA / SPDIF RF MODULATOR Input Output Band TV Standard Output Channel IEC 169-24 Male x 1 IEC 169-24 Female x 1 UHF PAL BG/I/DK, NTSC M 21~69(PAL), 14~83(NTSC) DEMODULATOR De
CONFORMITY DECLARATION “WE , FTE MAXIMAL, DECLARE THAT THE PRODUCTS IS IN CONFORMITY WITH FOLLOWING DIRECTIVES LVD 73/23/EEC EMC 89/336/EEC AS LAST AMENDED BY 93/68/EEC” rev 1.2 ENGLISH MAX S402PVR PAG.
