MAX S92+
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to “dangerous voltage” and to prevent from a risk of electric shock. Warning: To reduce the risk of electric shock, don’t open the cabinet. Refer servicing to qualified personnel only. The exclamation point within an equilateral triangle is intended to alert the user to important operating and maintenance (servicing). Please read the manual carefully before installing the receiver.
QUICK INSTALLATION GUIDE QUICK INSTALLATION GUIDE FOLLOW NEXT STEPS FOR THE CORRECT INSTALLATION OF THIS RECEIVER. STEP 1: CONNECTIONS The coaxial cable, with satellite signal, must be connected to the “IF IN” connector. The “TV SCART” connector must be connected to the TV set. Depending on the type of installation, the receiver should be connected and configured following next examples. ENGLISH rev 1.0 Example 1 – Basic System Example 2 – DISEqC switches Example 3 – Combined with terrestrial PAG.
QUICK INSTALLATION GUIDE STEP 2: BASIC CONFIGURATION OF THE RECEIVER Language: press [ ] to select languages. The selection of languages include: English, German, French, Spanish, Italian, Portuguese, Turkish, Polish, Russian, Danish, Greek, Hungarian, Arabic, Farsi, Dutch. First Audio: Some channels offer more than one audio language. This function allows you to set the preferred audio language for those channels using [ ].
QUICK INSTALLATION GUIDE recommend you to contact your installer or to refer to the user manual of this system to get the correct information. Single search: You can edit the following items (Image 2): IMAGE 3 PAG. 5 ENGLISH rev 1.0 IMAGE 2 1. Satellite: Press [ ] to switch Satellites or press [OK] to enter satellite list to select directly. 2. LNB Configuration: Selecting this option and pressing [OK], the LNB Configuration menu will be displayed.
QUICK INSTALLATION GUIDE Main Menu: Selecting this option, the main menu will appear on the TV. rev 1.0 ENGLISH IMAGE 4 Multi search: You can edit the following items (Image 4): 1. On “Satellite” item press [OK] to open the satellite list. Then press [ ] to move the highlight and press [OK] to mark/unmark and [EXIT] to finish the selection. You can select several satellites in this menu. At the bottom of the screen you can see the selected satellites. The system will use DiSEqC1.0/1.1, DiSEqC1.
QUICK INSTALLATION GUIDE STEP 3: TIME CONFIGURATION It is recommended to setup the clock before starting to enjoy the receiver, because correct time maybe is required by some applications. Please complete following options: IMAGE 5 rev 1.0 NOTE: If the current channel provides the correct time information, you will see the current time after you entered “Time” menu. If the channel doesn’t provide time information, you have to input the date and time information manually.
QUICK INSTALLATION GUIDE TV Channel List: This option shows the list of TV stored channels. Radio Channel List: This option shows the list of Radio stored channels. Favourite Channel List Name: It allows changing the name of the favourite groups. Delete All: This option deletes all TV and Radio stored channels. Restore channel list and settings: This option loads the user TV and Radio channel list, saved previously.
QUICK INSTALLATION GUIDE Language: This option allows choosing the language of the menus. TV System: This option allows choosing the video Standard and other parameters of the screen. Time & Timer Setting: Timer setting menu. Parental Lock: In this option, user can lock the access to the menu and change the password of the receiver. LNB Power: Turns on or off the LNB power. RCU position Switch: To chose the RCU position of the remote control.
INDEX 2. Basic Operations 2.0. Switch on STB……………………….....................................………………………………...14 2.1. Standby ……………………..............................................…………………………………...14 2.2. TTX …………..................................................……………………………………..14 2.3. Mute……………............................................………………………………………..14 2.4. Channel Number…………...........................……………………………………………………15 2.5. Multi-Pictures……............................……………………………………………………………15 2.6.
INDEX 3.4. Favourite Channel List Name……..........……………………………………......22 3.5. Delete All……...............……………………………………………….22 3.6. Restore channel list and settings………………..........…………………………………….23 3.7. Save channel list and settings………………..........…………………………………….23 5. System Setup 5.1. Language………………….............………………………...…………………...29 5.2. TV System……………..............…………………………..…………………...30 5.3. Time & Timer Setting ………....................………………………...………………30 5.3.1. Timer.............................
PANEL & REMOTE CONTROL DESCRIPTION 1. PANEL & REMOTE CONTROL DESCRIPTION 1 2 3 4 5 1. POWER: Switches the receiver on, or enters standby mode. 2. LOCK LED: Indicates a sufficient signal level at the IF IN input. 3. DISPLAY: 4 Digits to display the program numbers. 4. IR-SENSOR: Reception sensor for the IR remote control signals. 5. BUTTONS: These buttons allow controlling the main functions of the receiver, and provide the same functionality as the remote control ones. 1.2.
PANEL & REMOTE CONTROL DESCRIPTION 1 2 3 4 8 7 10 9 13 11 12 14 16 17 18 19 20 23 21 22 24 rev 1.0 15 PAG. 13 ENGLISH 6 5 1. POWER: Switches receiver ON or in stand-by-mode. 2. TEXT: Opens and closes teletext. 3. MUTE: Switches audio on and off. 4. NUMERIC KEYS: For direct typing values and names. 5. CH+ / CH-: Changes channel up and down. 6. TV/R: Switches between TV and Radio channels. 7. VOL+ / VOL-: Adjusts audio volume up and down. 8. EXIT: Exit menus or stop operations. 9.
BASIC OPERATIONS 2. BASIC OPERATIONS 2.0. SWITCH ON STB ENGLISH Switch the [Device’s Main Power] switch on. When the STB is first used it will display the quick setup page where the receiver can be configured quickly. For further use the STB will play the same channel as last time when it was switched off.
BASIC OPERATIONS 2. Press the [Mute] button again to restore the sound. 2.4. CHANNEL NUMBER In TV mode you can enter the channel number directly with your remote control unit and confirm the number with the OK button to change to the desired channel. 2.5. MULTI-PICTURES OSD 3 2.6. CH +/ CH In TV mode press [CH+/CH-] to change channel. 2.7. TV/RADIO In TV mode, press [TV/R] to switch to Radio mode. In Radio mode press [TV/R] again to switch back to TV mode. 2.8.
BASIC OPERATIONS ENGLISH OSD 6 OSD 7 You can use [ ] keys to navigate this list. 1. Press [Yellow] button to open the SAT list. After selecting a satellite the channel list will be reduced to the channels of this satellite. 2. Press [Blue] button to open the “Find” window. You can use this feature to find channel by their names. 3. Press [Red] button to open the expanded channel list. 4. Once the desired channel is selected, press [OK[ to change and display the marked channel.
BASIC OPERATIONS 2.14. LIST In TV mode, press [List] button to access directly to the “TV Channel List” menu or in Radio mode, press [List] button to access directly to to the “Radio Channel List” menu. 2.15. FAVOURITES OSD 10 ? FREQUENTLY ASKED QUESTION Q: Why the screen displays “No Favourite Channel” after pressing the [Favourite] button? A: No channels have been assigned to a Favourite Group yet. You can do this in the channel menu. 2.16. AUDIO TRACK / MODE 1.
BASIC OPERATIONS 2.20. SUBTITLES In TV mode, press [Sub] button for activating / deactivating the channel subtitles, depending on the provider information. 2.21. LNB SHORT OSD 14 rev 1.0 ENGLISH When LNB is short, it will notify user on screen “LNB Short!” (OSD 14). Please check your cables and connections for shorts. When the short is removed the warning message will disappear. PAG.
CHANNEL 3. CHANNEL OSD 15 3.1. TV CHANNEL LIST OSD 16 OSD 17 If you enter the Channel List menu a window like the one besides will open (OSD 17). 1. You can move the highlighted channel with [ ] and press [OK] to preview the highlighted program in the preview window. 2. You can enter directly the number of the desired channel with the remote control. The selection will select that channel, but it will not be previewed until you confirm with [OK] button. 3.
CHANNEL 3.1.2. MOVE OSD 19 1. To move/change channels: Pushing the [Red] button, you will see a picture like OSD 19. You will be able to move or change the position of the channels: - Push again the [Red] button to move the channel. - Push the [Green] button to change the position of the channel. 2. Move the channel to the desired position with [ ]. Press [OK] to confirm the position. ENGLISH 3.1.3. SORT OSD 20 1. Press [Green] to open the Sort window (OSD 20).
CHANNEL mode after you confirm to save the changes when you leave this menu. OSD 24 3.1.4.3 LOCK In Channel Edit menu, press [Yellow] button to place a Lock icon behind the name of the highlighted channel. Marked channels (OSD 24) will be locked and displayed only after password has been entered if you confirm to save the changes when you leave this menu. 3.1.4.4 EDIT OSD 26 OSD 27 rev 1.0 3.1.5. FIND OSD 28 1. Press [Blue] button to open the “Find” window like showed besides (OSD 28).
CHANNEL 3.2. RADIO CHANNEL LIST Basically the operation of “Radio Channel List” is same as “TV Channel List”, except that in the small channel window the Fte Logo will be displayed (OSD 29). 3.3. CHANNEL SETUP OSD 29 When you enter the “Channel Setup” menu you will see a screen like beside (OSD 30): ENGLISH 3.3.1. START-UP CHANNEL OSD 30 Press [OK] to enter “Start-up Channel” menu to see the screen like showed beside (OSD 31): 1.
CHANNEL 2. After entering the password correct a safety question will show up where you have to confirm first (OSD 35 next page). 3. Select “Yes” to delete all channels or “No” to cancel and confirm with [OK]. 4. In step 2 and step 3, pressing [Exit] will exit the function directly without saving. OSD 34 3.6. RESTORE CHANNEL LIST AND SETTINGS OSD 35 Using this option, the receiver will load the channels saved as previously as a backup of the user channels list (see point 3.7.).
INSTALLATION 4. INSTALLATION ENGLISH OSD 38 Press [Menu] in the TV mode to enter the main menu (OSD 38). ] to select the Installation item. 1. Press [ 2. Press [OK] to enter the selected item. In the Installation menu (OSD 39): 3. Press [ ] to select the wanted menu item. 4. Press [OK] to enter the selected item among. - Single Search - Multi Search - TP Scan - Satellite List - TP List - Satellite Guide OSD 39 OSD 40 After selecting Antenna Setup another window will be opened (OSD 40).
INSTALLATION OSD 42 4.2. MULTI SEARCH OSD 43 rev 1.0 OSD 44 When you enter the “Multi Search” menu a window like the one beside will open (OSD 43). 1. On “Satellite” item press [OK] to open the satellite list (OSD 44). Then press [ ] to move the highlight and press [OK] to mark/unmark and [EXIT] to finish the selection. You can select several satellites in this menu. At the bottom of the screen you can see the selected satellites (OSD 45). The system will use DiSEqC1.0/1.1, DiSEqC1.
INSTALLATION ENGLISH OSD 46 OSD 47 OSD 48 OSD 49 When you enter “TP Scan” menu a window like the one beside will be displayed (OSD 46): ] to select the satellite 1. On “Satellite” item, press [ you want to scan or press [OK] to open the satellite list for selection. 2. On “TP Index” item use [ ] to select the desired transponder. If any of the TP of the list have tuned and stored channels into the receiver, the following two options “Frequency” and “Symbol Rate” will not be able to be edited.
INSTALLATION will search the selected TP. In case you select “On”, the NIT (Network Identification) will be identified and the receiver will automatically search all the TP of this network. 6. Press [OK] to start scanning. 7. On the “TP Scan” item, press [Exit] to cancel the scanning and saving the found channels. 4.4. SATELLITE LIST OSD 50 OSD 52 rev 1.0 OSD 53 OSD 54 4.5. TP LIST When you open the “TP List” menu you will see a window like the one beside (OSD 53). 1.
INSTALLATION 4.6. SATELLITE GUIDE ENGLISH OSD 55 When you enter “Satellite Guide” menu, you will see the screen like beside (OSD 57). Here you can enter your local longitude and latitude and the satellite’s longitude. The receiver calculates the antenna’s azimuth and elevation to point your antenna to the selected satellite. 1. Use the [Number] buttons to input the values of “Local Longitude”, “Local Latitude” and “Satellite Longitude”. 2.
SYSTEM SETUP 5. SYSTEM SETUP OSD 59 5.1. LANGUAGE OSD 60 rev 1.0 OSD 61 After selecting the “Language” menu you will see a window like beside (OSD 61): 1. Language: press [ ] to select languages. The selection of languages include: English, German, French, Spanish, Italian, Portuguese, Turkish, Polish, Russian, Danish, Greek, Hungarian, Arabic, Farsi, Dutch. 2. First Audio: Some channels offer more than one audio language. This function allows you to set the preferred audio ].
SYSTEM SETUP 5.2. TV SYSTEM OSD 63 * With this model, 4:3 / 16:9 switching is not allowed. * With this model, RGB output is not allowed. ENGLISH OSD 62 When you enter the “TV System” menu you will see the screen like below (OSD 62): 1. Display Mode is used to switch the display mode. You can select from Auto / PAL / PAL-M / NTSC 3.58. Press [ ] to select the desired mode. 2. Aspect Mode is used to switch the screen aspect ratio mode. You can select from Auto / 4:3 PS / 4:3 LB / 16:9.
SYSTEM SETUP OSD 66 When you select “Local Time Setting” and press [OK] then you will see a window like the one beside (OSD 67): 1. GMT Usage: This item is used to set the time by using the time signal from the satellite. Press [ ] to change the setting. 2. The “GMT Offset” item is only available when “GMT Usage” is set to “On”. Press [ ] to set the “GMT Offset” value. With every time you press the button the time offset will be increased / decreased by half an hour. 3.
SYSTEM SETUP 5.3.3. SLEEP TIMER Press [OK] button in this option to set the sleep timer. You will see “SLEEP TIME OFF / SLEEP TIME 10 / SLEEP TIME 30 / SLEEP TIME 60 / SLEEP TIME 90 / SLEEP TIME 120”. (OSD 69) If you set a sleep time, the system will change to Standby mode after the chosen time period. ENGLISH OSD 69 OSD 70 5.4. OSD SETTING When you select “OSD Setting” you will see a screen like beside (OSD 70): ] to select “On” or “Off”. If the 1.
SYSTEM SETUP OSD 72 and every time when you think that your password is known by unauthorized persons. To change the password, enter the new password in the “New Password” item and repeat the same one in the “Confirm Password” item. If the passwords are not identically then you will see a warning message. If you entered the same new password in both fields then you will see the message “Saving Data, Please Wait…”. From now on you need to use the new password to open locked menus or locked channels.
TOOLS 6. TOOLS ENGLISH OSD 76 Press [Menu] in the TV mode to enter the main menu (OSD 76). ] to select the Tools item. 1. Press [ 2. Press [OK] to enter the selected item. In the Tools menu (OSD 77): 3. Press [ ] to select the wanted menu item. 4. Press [OK] to enter the selected item among. - Information - Quick Setup - Game - Factory Default - Software Upgrade - SatcoDX Auto Programing 6.1. INFORMATION OSD 77 1. When you select the “Information” menu you will see a screen like beside (OSD 78).
TOOLS 6.3. GAME When you enter “Game” menu, you will see three Games include Tetris, Snake and Othello (OSD 80). 6.3.1. TETRIS OSD 80 6.3.2. SNAKE 1. Mark “Setup” and press [ ] to select the level (speed). 2. Mark “Start” and press [OK] to start the game. 3. Mark “Cancel” and press [OK] to leave the game. 4. Play the game: - Press [ ] to guide the snake to the red blocks. Every block you ate increases the length of the snake. If the snake runs against a wall or against itself then it dies.
TOOLS 6.5. SOFTWARE UPGRADE There are two ways of upgrading the software of the receiver as you can see at OSD 82. 6.5.1. RS232 UPGRADE ENGLISH OSD 82 1. This function allows you to upgrade the software of the receiver. This can be done from PC to receiver or from a master receiver to a slave receiver. 2. Connect master receiver or PC to the slave receiver via serial interface (0-Modem cable). Enter the “Software Upgrade” menu of the master receiver and press [ ] to change the upgrade mode.
TOOLS menu and press [OK]. The screen will show the message “OK to Proceed” (OSD 85). 3. Press [OK] again and you will see the message “Ready to Download” (OSD 86). 4. In the PC application set the Baud Rate to 115200 and start the download procedure. ! Caution: The new download channels will delete the original channels list. Please be careful before using it. OSD 85 ENGLISH rev 1.0 OSD 86 PAG.
TECHNICAL SPECIFICATION VIDEO Decoding Bit rate Output Active pixel Output connector MPEG-2 & MEPG-1 compatible Max 15Mbps PAL/NTSC 720x480 @ 30fps; 720x576 @25fps Scart AUDIO Decoding Mode Bit rate Output connector MPEG-2/MPEG-1 layer I & II Mono, Dual, Stereo, Joint stereo Max 384Kbps Scart / SPDIF DEMODULATOR Demodulation Symbol rate Outer code Inner code Energy dispersion QPSK SCPC/MCPC RS (204, 188, 8) ALL DVB rates DVB-S recommendation INPUT SIGNAL Frequency Input level Channel bandwidth Input
CONFORMITY DECLARATION “WE , FTE MAXIMAL, DECLARE THAT THE PRODUCTS MAX S92+ LOW VOLTAGE DIRECTIVE 2006/95/EC rev 1.0 EMC DIRECTIVE 2004/108/EC” PAG.
