MAX T150/MAX T160
Quick Installation Guide. Follow next steps for the correct installation of this receiver. Step 1: Connections Connect a coaxial cable from the output socket to the “Antenna Input” connector. Connect a coaxial cable from the “Loop out” connector at the receiver to your TV input connector as it is shown in Scheme1. Model without modulator (MAX T150): Coaxial cable (Not included) SCART (Not included) Scheme1 This receiver has not built in modulator so it has to be connected to the TV through a SCART cable.
Quick Installation Guide. Step 2: Basic configuration of the receiver The receiver includes an installation assistant that will help you to setup the different parameters. When the receiver is turned on at first time (using the button at the rear panel of the receiver), the next menu is shown on the TV: Image 1 In order to move through the different options of this menu, please use the keysof the remote control.
Quick Installation Guide. Don’t make any action with the receiver until the Auto scan has finished. For more information about this option, please read point 4.1 of the complete manual. Image 2 Main Menu: if all the previous steps have finished correctly, you can exit the installation menu, by using “Main Menu” option and press [OK]. Step 3: Time configuration It is recommended to setup the clock before starting to enjoy the receiver, because correct time maybe is required by some applications.
Quick Installation Guide. TV Channel List: This option shows the list of TV stored channels. Radio Channel List: This option shows the list of Radio stored channels. Delete All Favourites: This option deletes all the favourite lists created. Delete All Channels: This option deletes all TV and Radio stored channels. Auto Scan: This option make a full scan of all TV and Radio channels received. Channel Scan: This option make a compete scan of only one Multiplex.
INDEX Safety precaution Caution..........................................................................................................................6 1. Remote control & panel description 1.1.Front panel description........................................................................................................7 1.2.Rear panel description..........................................................................................................7 1.3.Remote control description......................
CAUTION SAFETY PRECAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to "dangerous voltage" and to prevent from a risk of electric shock Warning: To reduce the risk of electric shock, don't open the cabinet. Refer servicing to qualified personnel only. The exclamation point within an equilateral triangle is intended to alert the user to important operating and maintenance (servicing).
1. REMOTE CONTROL & PANEL DESCRIPTION 1. REMOTE CONTROL & PANEL DESCRIPTION FRONT 12 1. IRD 2. POWER LED 1.2 REAR PANEL DESCRIPTION T150 1 2 3 4 5 6 7 8 9 1. ANTENNA IN:Terr. input of the digital tuner. 2. LOOP OUT: Terr. ouput for cascading to others devices. Note:The operation of another receiver at the same time is only possible with limited channel selection 3. S/PDIF: Coaxial output for digital audio (AC3). 4. OPTICAL: Salidas optica para audio digital (AC3). 5.
REMOTE CONTROL & PANEL DESCRIPTION 1.3 REMOTE CONTROL DESCRIPTION 1 17 12 4 19 3 13 5 2 10 11 6 8 7 15 14 9 18 1- Standby 2- CH+/CH3- Vol+/Vol4- Número 5- TV/Radio 6- OK 7- Audio 8- EPG 9- FAV+/10- Exit 11- Menú 12- Mute 13- Recall/Back 14- FAV 15- Información 16- Pup / Pdw 17- TTX 18- Zoom 19. Multiwindow 16 2. HOTKEY 2.1 Standby 1.Press [Power] button to switch from TV mode to Standby mode 2.In Standby mode press [Power] button again to switch back to TV mode.
BASIC OPERATIONS 2.5 TV/Radio In TV mode, press [TV/RADIO] to switch to Radio mode. In Radio mode press [TV/RADIO] again to switch back to TV mode. OSD 1 2.6 OK 1. In full screen, press [OK] key can enter “Channel List”, please refer to TV Channel List for detail information. 2.7 AUDIO 1.In TV mode, press the [Audio] button to open the Audio Mode window. ( OSD 1) 2.8 EPG OSD 2 1.The STB has an Electronic Program Guide (EPG) to help you navigate channels through all the possible viewing options.
BASIC OPERATIONS 2.10 EXIT 2. Funciones basicas [Exit] key can exit current menu. 2.11 Menu [Menu] key can enter the menu or exit current menu. 2.12 MUTE 1.Press the [Mute] button to mute the sound. On the screen an icon will be displayed to indicate the muted sound. OSD 5 2.Press the [Mute] button again to restore the 2.13 BACK Pressing the [Recall] button allows you to toggle between the actual and the last selected channel. 2.14 FAV 1.
MENU OPERATIONS 2.18 Zoom 2.19 Multi-window The screem will display 9 channels preview window (static) from the current channel. And only the highlight preview program can play normally. OSD 5.1 3.CHANNEL Press [Menu] in the TV mode to enter the main menu. 1. Press [Channel Up/Down] Channel item. to select the 2. Press [OK] to enter the selected item. OSD 6 In the Channel menu: 1. Press [Channel Up/Down] to select the wanted menu item among TV Channel, Radio Channel and Delete All. 2.
MENU OPERATIONS 3.1.1 Favorite 1. Press number key [1] can open the “Favorite” window like above (OSD 9) 2.You can move highlight between 8 favorite groups by press [Up/Down] key and press [OK] key to make a favorite mark in the right side of the selected Favorite group. OSD 9 3. Press [OK] key on the marked Favorite group can cancel the exist favorite mark. 4. After marking, press [Exit] key can back to “TV Channel List” , there will show a favorite mark beside the marked channel. 3.1.2 Move 1.
OPERATIONS MENU 3.1.5 TV Channel List Edit 1. Press number key [5] will open a message box for you to enter password, and the default password is “0000” 2. There are five items of “TV Channel List Edits”: Delete, Skip, Lock, Edit, and Delete all. (OSD 13) OSD 13 3. Press [Exit] can exit “TV Channel List Edit” menu. The system will show up a message box to inquire you whethersaving or not. 3.1.5.
OPERATIONS MENU 3.1.5.4 Edit In “TV Channel List Edit” menu, press number key [4] can enter edit box like below (OSD 17): 1 .On the “Name” item, press [OK] key can display keypad to edit the name of selected channel. 2. “Video PID”, “Audio PID” and “PCR PID” items are grey and can not be edited. OSD 17 3. After modification, move highlight to “Save” item and press [OK] key can save the modified value and exit “Edit” mode.
MENU OPERATIONS 3.4.DELETE ALL In “Delete All” item (OSD 21): 1. There will display an dialogue for user to key in password. The default Password is “0000”. 2. When you input the correct password,there will show up a warning message box to inquire you whether delete all or not. 3. If you select “Yes”, all channels will be deleted. OSD 21 4. In step 1 and step 2, press [Exit] key can exit the function directly without save. 4.
MENU OPERATIONS 4.2 CHANNEL SCAN When you enter to “Channel Scan” menu, there will display the screen like below (OSD 25): 1. There is two mode. You can scan channel by channel or by frequency” . 2. When scan band is UHF, the range of Ch No. is from 13 to 61. When scan band is VHF, the range of Ch No. is from 1 to 12. OSD 25 3. When you complete your modification,move highlight to “Search” item and press [OK] key, then it will begin to scan. 4.
MENU OPERATIONS 4.4 AERIAL ADJUSTAMENT When you enter to “Aerial Adjustment” menu, there will display the screen like below (OS28): In Aerial Adjustment mode: 1. Ch No.: Press [Left/Right] to select the Ch No. The range is from 2 to 69. 2. Tuner Power: On / Off OSD 28 5. SYSTEM SETUP When you enter to “System Setup” menu, you will see the screen like below (OSD 30): In “System Setup” menu: 1. Press [Left/Right] key to select menu pages among Channel, Installation, System and Tools. 2.
MENU OPERATIONS 5.1 OSD LANGUAGE When you enter to “Language” menu, you will see the screen like below (OSD 31): 1. Language: press [Left/Right] key to select languages, the selections of languages include: English, French, German, Italian, Portuguese, Spanish and Turkish. 2. First Audio: Some channels have more than one audio language for choosing; by this function you can set the first audio for this channel.
OPERATIONS MENU 5.3 START UP SERVICE 1. Startup Channel: Press [OK] key to enter “Startup up Service” menu, and you will see the screen like below (OSD33): is “On”, it means the following two items can be work. If the setting is “Off”, it means the “Boot on Channel” function can’t work. • In the “Mode” item, you can set the “Startup Channel” as “TV” mode or “Radio” mode.
OPERACIONES DEL MENÚ • Timer Service: There are two options for “Timer Service”, include Channel (timer setting for channel change and wakeup/Sleep) and Message (reminding message). • When you select “Channel” (timer setting for channel change and Wakeup/Sleep) option in “Timer Service”, the screen will display like below: •Wakeup Channel: press [OK] key to enter channel list and select channel that you want to setting. •Wakeup Date: use number keys to input your wakeup date.
MENU OPERATIONS 5.6 OSD SETTING When you input to “OSD Setting” menu, you will see a screen like below (OSD 39): 1. Subtitle Display: You can press [Left/Right] key to select “On” or “Off”. If the current channel has subtitle information, it will be showed up while this function is “On”. If this function is “Off”, there won’t show up subtitle information even if the current channel has subtitle information. 2.
MENU OPERATIONS 5.8. RCU POSITION IMG 4 In order to avoid interferences between remote controls, you have the possibility to change the code of it, to do that you have to change the position of a switch in the remote control. But first of all you have to change this code in the receiver. You can do this in the menu “Position RCU”. ( OSD41) You have to select the same position in the receiver and in the remote control. OSD 41 6.
MENU OPERATIONS 6.1 INFORMATION 1. When you enter to “Information” menu, you will see a screen like above (OSD 44). The screen displays some parameters of information of current channel, and this function same as the function [Information] in the full screen play mode. 2. Press [Exit] key to draw back from “Tools” menu. OSD 44 6.2 GAME When you enter “Game” menu, you will see three Games include Tetris, Snake and Othello. Basic operation statement: 1.
MENU OPERATIONS 6.3 LOAD FACTORY DEFAULT When you press [OK] key In the “Load Factory Default” item: 1. There will pop a dialogue for you to enter the password, and the default password is “0000”. 2. After you input the correct password, there will show a warning message to inquiry you “The operation will load default and erase all the channels that user added, continue?”. 3. If you select “Yes” option, the all revised parameters of the receiver will reset to default value.
7.TECHNICAL SPECIFICATIONS PART OF THE DECLARATION OF CONFORMITY CE “We , FTE Maximal, declare that the products MAX T150 / MAX T160 is in conformity with following Directives LVD 73/23/EEC EMC 89/336/EEC as last amended by 93/68/EEC” If it wishes a copy of the declaration you can ask for it to the company.
