MAX T110
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to “dangerous voltage” and to prevent from a risk of electric shock Warning: To reduce the risk of electric shock, don’t open the cabinet. Refer servicing to qualified personnel only. The exclamation point within an equilateral triangle is intended to alert the user to important operating and maintenance (servicing).
QUICK INSTALLATION GUIDE QUICK INSTALLATION GUIDE Follow next steps for the correct installation of this receiver. STEP 1: CONNECTIONS Connect a coaxial cable from the output socket to the “Antenna Input” connector. Connect a coaxial cable from the “Loop out” connector at the receiver to your TV input connector as it is shown in Scheme1. Model without modulator: This receiver has not built in modulator so it has to be connected to the TV through a SCART cable. rev 1.0 ENGLISH PAG.
QUICK INSTALLATION GUIDE STEP 2: BASIC CONFIGURATION OF THE IMAGE 1 IMAGE 2 The receiver includes an installation assistant that will help you to setup the different parameters. When the receiver is turned on at first time (using the button at the rear panel of the receiver), the next menu is shown on the TV: In order to move through the different options of this menu, please use the keysof the remote control.
QUICK INSTALLATION GUIDE STEP 3: TIME CONFIGURATION rev 1.0 PAG. 5 ENGLISH IMAGE 3 It is recommended to setup the clock before starting to enjoy the receiver, because correct time maybe is required by some applications. Please complete following options: Press the [Menu] key of the remote control for appearing the main menu. Select the “System Configuration” option and confirm pressing [OK]. Once in the “System Configuration” option, please select “Region and Time” option and press [OK].
QUICK INSTALLATION GUIDE TV Channel List: This option shows the list of TV stored channels. Radio Channel List: This option shows the list of Radio stored channels. Favourite Channel List Name: It allows changing the name of the favourite groups. Delete All Channels: This option deletes all TV and Radio stored channels. Auto Scan: This option make a full scan of all TV and Radio channels received. Channel Scan: This option make a compete scan of only one Multiplex.
QUICK INSTALLATION GUIDE OSD Language: This option allows selecting different menu and options languages. TV System: This option allows choosing the video Standard and other parameters of the screen. Start up Service: This option allows setting the receiver to start in a predefined channel. Timer Setting: Timer setting menu. OSD Setting: In this option, the subtitles of the channel information can be configured.
INDEX 2. Hotkey 2.1.Standby.........................................................................................................12 2.2.CH+/CH-.......................................................................................................12 2.3.Vol+/Vol-......................................................................................................12 2.4.Number........................................................................................................12 2.5.TV/Radio............
INDEX 4. Installation 4.1.Auto scan............................................................................19 4.2.Channel scan.................................................................................19 4.3.Channel setup...................................................................20 4.4.Aerial adjustment..........................................................20 6. Tools 6.1.Information...................................................................................................26 6.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to “dangerous voltage” and to prevent from a risk of electric shock Warning: To reduce the risk of electric shock, don’t open the cabinet. Refer servicing to qualified personnel only. The exclamation point within an equilateral triangle is intended to alert the user to important operating and maintenance (servicing).
REMOTE CONTROL & PANEL DESCRIPTION 1. PANEL & REMOTE CONTROL DESCRIPTION 1.1. FRONT PANEL DESCRIPTION 1.Remote Sensor: Detects the infrared signals from the remote control unit. 2.POWER LED: Shows the state of the receiver: 1. LED on: The receiver is on; 2. LED blinks slowly: The receiver is in Standby mode; 3. LED blinks quickly: The receiver is being updated through RS232 port; 4. LED off: The receiver is not supplied. Please, verify if the receiver is plugged or if the switch at the rear panel is on.
REMOTE CONTROL & PANEL DESCRIPTION 1.3 REMOTE CONTROL DESCRIPTION 1 12 4 9 16 2 3 6 11 8 10 18 17 7 5 13 14 15 2. HOTKEY 2.1 STANDBY 1.Press [Power] button to switch from TV mode to Standby mode 2.In Standby mode press [Power] button again to switch back to TV mode. The last active channel will be showed. 3.To switch off the STB complete press the main power button. 2.2 CH+/CHIn TV mode press [Channel Up/Channel Down] to change channel. 2.
BASIC OPERATIONS 2.5 TV/RADIO In TV mode, press [TV/RADIO] to switch to Radio mode. In Radio mode press [TV/RADIO] again to switch back to TV mode. OSD 1 2.6 CHANNEL LIST 1. In full screen, press [OK] / [List] key can enter “Channel List”, please refer to TV Channel List for detail information. 2.7 AUDIO 2.8 EPG OSD 2 1.The STB has an Electronic Program Guide (EPG) to help you navigate channels through all the possible viewing options.
BASIC OPERATIONS 2.13 BACK Pressing the [Recall] button allows you to toggle between the actual and the last selected channel. 1. In TV mode press the [Favorite] button to display the Favorite Group window on the screen as the picture beside shows (OSD 5). 2. In the Favorite Group window you can select the desired favorite channel with [Channel Up / Down] and confirm it with [OK] to switch to it. In bigger groups you can navigate with [Page Up/Page Down]. 3.
CHANNEL 3.CHANNEL OSD 6 3.1 TV CHANNEL LIST OSD 7 OSD 8 When you enter to “Channel List” menu, there will display the screen like below (OSD 8). ] key and press 1.You can move highlight by press [ [OK] key to preview the current highlighted program in the right side preview window. 2.You can press [Page Up/Page Down] key to implement the Page Up/Page Down function. 3.You can use [ c] key to switch “Group”. 4.You can press [Menu] or [Exit] keys to enter full screen playing mode. 5.
CHANNEL 3.1.3 FIND ENGLISH OSD 11 1. Press number key [3] can open the “Find” window like above (OSD 11). You can press number [0] key to [9] key to input letter or number into the dialogue. Every time you press number key it will change the letter or number. For example, every time you press number [2], it will show “a”>”b”->”c”->”2” ->”a”->… 2. After input each character, the program list on the left will search the channel according your input, and list the matched channel. 3.
CHANNEL screen. (OSD 15). 3.1.5.3 LOCK OSD 15 In “TV Channel List Edit” menu, press number key [3] can make a “lock mark” in the right side of the highlighted channel. After save and exit “TV Channel List Edit” menu, STB will request you to input the password while you want to watch the locked channel. (OSD 16) 3.1.5.4 EDIT 3.1.5.5 DELETE ALL OSD 17 1. In “TV Channel List Edit” menu, press number key [5] can mark all the channel with delete mark (OSD 18). 2.
CHANNEL 3.4. DELETE ALL FAVORITES OSD 19B In “Delete All” item (OSD 20): 1. There will display an dialogue for user to key in password. The default Password is “0000”. 2. When you input the correct password, there will show up a warning message box to inquire you whether delete all or not. 3. If you select “Yes”, all favorite channels will be deleted. 4. In step 1 and step 2, press [Exit] key can exit the function directly without save ENGLISH 3.5.DELETE ALL In “Delete All” item (OSD 21): 1.
INSTALLATION 4.INSTALLATION OSD 22 4.1.AUTO SCAN OSD 23 When you enter to “Auto Scan” menu, there will display the screen like below (OSD 24): 1. Firstly please select the country in System Setup Menu / Region and Time / Region 2 .In “Scan Mode” item, press [ t] key to select scans all channels or just scans free channels. 3 Moving the highlight to “Search” item and press [OK] key to start scanning. 4 In the “Auto Scan” menu, press [Exit] key to draw back from the scanning. 4.2 CHANNEL SCAN rev 1.
INSTALLATION 4.3 CHANNEL SETUP ENGLISH OSD 26 When you enter to “Channel Setup” menu, there will display the screen like below: 1. You can see the channel information like the picture displaying (OSD 26). ] key can move the highlight to select 2. Move the [ the channel. 3. When press [OK] key again, you can see the window like below (OSD 27): 4. Input PID information,then move highlight to “Search” item and press [OK] key, then it will begin to scan. 4.
SYSTEM SETUP 5. SYSTEM SETUP OSD 29 5.1 OSD LANGUAGE OSD 30 OSD 31 When you enter to “Language” menu, you will see the screen like below (OSD 31): 1. Language: press [ ] key to select languages, the selections of languages include: English, French, German, Italian, Portuguese, Spanish and Turkish. 2. First Audio: Some channels have more than one audio language for choosing; by this function you can set the first audio for this channel.
SYSTEM SETUP ENGLISH PAL-BG / NTSC/ PAL-N. You can press [ ] key to select each mode circularly. 2. Aspect Mode is used for switching the screen aspect ratio mode. Now we provide below options: 4:3 PS / 4:3 LB / 16:9. You can press [ ] key to select each mode circularly. 3. Video Output is use for switching the video output mode. Now we provide below options: CVBS, CVBS+RGB. You can press [ ] key to select each mode circularly. 4.
SYSTEM SETUP 5.5 TIMER SETTING OSD 35 rev 1.0 OSD 37 OSD 38 PAG. 23 ENGLISH OSD 36 When you enter “Timer Setting”, you will see the window like below(OSD 35): 1. Program Timer: Select “Program Timer” item and pres [OK] key to enter “Program Timer” menu. • Current time information will display on the first column; if the current time is incorrect, please modify the time information in “Time” item. • Timer Number: You can press [ t] keys to set Timer number, and there are 8 timers in total.
SYSTEM SETUP 3. Load Default Timer Setting When you enter “Load Default Timer Setting”, you will see the window like below: •Press [OK] key on “Load Default Timer Setting”, it will show “Inpute Password” dialogue. •After you input the correct password, there will show a warning message to inquiry you “All Timers will be cleared, continue?” •If you select “Yes”, it will clear all the timer. •You can press [Exit] key to exit.
SYSTEM SETUP rev 1.0 PAG. 25 ENGLISH the lock channels, whether have to input the password or not. If the setting is “Yes”, play the channels with lock mark will show up a dialogue on the screen and ask for the password. If the setting of “Channel Lock ”is “No”, the Lock function will invalid. 4. New Password is used for revising password; you can input the new password in this item by using number keys directly.
TOOLS 6.TOOLS ENGLISH OSD 41 Press [Menu] in the TV mode to enter the main menu (OSD 41). 1. Press [ ] to select the Tools item. 2. Press [OK] to enter the selected item. In the Tools menu (OSD 42): 3. Press [ ] to select the wanted menu item. 4. Press [OK] to enter the selected item among. - Information - Game - Load Factory Default - Software Upgrade - Welcome Page 6.1 INFORMATION 1. When you enter to “Information” menu, you will see a screen like above (OSD 43).
TOOLS 6.3 LOAD FACTORY DEFAULT When you press [OK] key In the “Load Factory Default” item: 1. There will pop a dialogue for you to enter the password, and the default password is “0000”. 2. After you input the correct password, there will show a warning message to inquiry you “The operation will load default and erase all the channels that user added, continue?”. 3. If you select “Yes” option, the all revised parameters of the receiver will reset to default value. Please carefully to using this function.
TOOLS 6.5. WELCOME PAGE rev 1.0 ENGLISH OSD 42 The receiver includes an installation assistant that will help you to setup the different parameters as you can see at OSD 44. 1. Language: press [ ] to select the language that will appear on the menus (see point 5.1.) 2. First Audio: Some channels offer more than one audio language. This function allows you to set the preferred audio language for those channels using[ ]. (See point 5.1.) 3. Second Audio: Some channels offer more than one audio language.
TECHNICAL SPECIFICATIONS Compatible MPEG-2 & MEPG-1 Bit rate Max 15Mbps Output PAL/NTSC Aspect ratio 4:3, 16:9, Auto Active pixel 720x480 @ 30fps; 720x576 @25fps Output connector Scart / RCA Audio Decoding MPEG-2/MEPG -1 Layer I & II Sampling rate 32 /44,1/ 48 Khz Output connector Scart / RCA Imput Signal COFDM 2k, 8k Guard 1/4, 1/8 , 1/16, 1/32 SIGNAL Frequency VHF-UHF Imput Level 32 - 90 dBuV Miscellanous Supply voltage 100~240VAC 50~60 Hz Power consumption Typ. 21 watts / Max.
PART OF THE DECLARATION OF CONFORMITY CE “WE , FTE MAXIMAL, DECLARE THAT THE PRODUCTS MAX T110 LOW VOLTAGE DIRECTIVE 2006/95/EC EMC DIRECTIVE 2004/108/EC” rev 1.0 ENGLISH IS IN CONFORMITY WITH FOLLOWING DIRECTIVES PAG.
