MAX T140
QUICK INSTALLATION GUIDE. Warning: To reduce the risk of electric shock, don’t open the cabinet. Refer servicing to qualified personnel only. The exclamation point within an equilateral triangle is intended to alert the user to important operating and maintenance (servicing). ENGLISH WARNING: Do not use this STB where contact with or immersion in water is a possibility. Do not use near flower vase, washbowls, kitchen sinks, laundry tubs, swimming pools, etc.
QUICK INSTALLATION GUIDE. Follow next steps for the correct installation of this receiver. STEP 1: CONNECTIONS Connect a coaxial cable from the output socket to the “Antenna Input” connector. Connect a coaxial cable from the “Loop out” connector at the receiver to your TV input connector as it is shown in Scheme1. Model without modulator: This receiver has not built in modulator so it has to be connected to the TV through a SCART cable. rev 1.1 ENGLISH PAG.
QUICK INSTALLATION GUIDE. STEP 2: BASIC CONFIGURATION OF THE RECEIVER IMAGE 1 The receiver includes an installation assistant that will help you to setup the different parameters. When the receiver is turned on at first time (using the button at the rear panel of the receiver), the next menu is shown on the TV: In order to move through the different options of this menu, please use the keysof the remote control.
QUICK INSTALLATION GUIDE. IMAGE 2 ENGLISH rev 1.1 IMAGE 3 on the TV. For setting up the time, please complete: 1.Country: Confirm that the correct country has been selected during the quick installation. 2.GMT Usage: this option will allow you to select if the date and time will be introduced manually (Use GMT: Off), if you prefer that it will be automatic by country (Use GMT: By Region) or if you wish to introduce the offset respect GMT manually (Use GMT: Defined by user). 3.
QUICK INSTALLATION GUIDE. TV Channel List: This option shows the list of TV stored channels. Radio Channel List: This option shows the list of Radio stored channels. Delete All Favourites: This option deletes all the favourite lists created. Delete All Channels: This option deletes all TV and Radio stored channels. Auto Scan: This option make a full scan of all TV and Radio channels received. Channel Scan: This option make a compete scan of only one Multiplex.
QUICK INSTALLATION GUIDE. OSD Language: This option allows selecting different menu and options languages. TV System: This option allows choosing the video Standard and other parameters of the screen. Start up Service: This option allows setting the receiver to start in a predefined channel. Region and Time: In this option, the time of the receiver and user region or country can be configured. Timer Setting: Timer setting menu.
ENGLISH 1. Remote control & panel description 1.1.Front panel description.................................................................................11 1.2.Rear panel description.................................................................................11 1.3.Remote control description........................................................................12 2. Hotkey 2.1.Standby...........................................................................................12 2.2.CH+/CH-.............
INDEX 5. SYstem setup 5.1.OSD language....................................................................................21 5.2.TV system...................................................................................21 5.3.Start up service...................................................................................22 5.4.Region and time.......................................................................................22 5.5.Timer setting........................................................
SAFETY PRECAUTION Warning: To reduce the risk of electric shock, don’t open the cabinet. Refer servicing to qualified personnel only. The exclamation point within an equilateral triangle is intended to alert the user to important operating and maintenance (servicing). ENGLISH WARNING: Do not use this STB where contact with or immersion in water is a possibility. Do not use near flower vase, washbowls, kitchen sinks, laundry tubs, swimming pools, etc.
REMOTE CONTROL & PANEL DESCRIPTION 1. DESCRIPCIÓN DEL PANELES Y MANDO A DISTANCIA 1 2 1.Remote Sensor: Detects the infrared signals from the remote control unit. 2.POWER LED: Shows the state of the receiver: 1. LED on: The receiver is on; 2. LED blinks slowly: The receiver is in Standby mode; 3. LED blinks quickly: The receiver is being updated through RS232 port; 4. LED off: The receiver is not supplied. Please, verify if the receiver is plugged or if the switch at the rear panel is on.
REMOTE CONTROL & PANEL DESCRIPTION 1.3 REMOTE CONTROL DESCRIPTION 1 12 4 16 9 16 2 3 6 11 8 10 18 17 7 5 13 14 15 1- Standby 2- CH+/CH3- Vol+/Vol4- Number 5- TV/Radio 6- OK 7- Audio 8- EPG 9- FAV+/10- Exit 11- Menu 12- Mute 13- Recall/Back 14- FAV 15- Información 16- Pup / Pdw 17- TTX 18- Zoom 19- Multiwindow 2. 2. HOTKEY 2.1 STANDBY 1.Press [Power] button to switch from TV mode to Standby mode 2.In Standby mode press [Power] button again to switch back to TV mode.
BASIC OPERATIONS 2.5 TV/RADIO In TV mode, press [TV/RADIO] to switch to Radio mode. In Radio mode press [TV/RADIO] again to switch back to TV mode. OSD 1 2.6 OK 1. In full screen, press [OK] key can enter “Channel List”, please refer to TV Channel List for detail information. 2.7 AUDIO 1.In TV mode, press the [Audio] button to open the Audio Mode window. ( OSD 1) 2.8 EPG OSD 2 1.The STB has an Electronic Program Guide (EPG) to help you navigate channels through all the possible viewing options.
BASIC OPERATIONS 2.14 FAV 1. In TV mode press the [Favorite] button to display the Favorite Group window on the screen as the picture beside shows (OSD 5). 2. In the Favorite Group window you can select the desired favorite channel with [Channel Up / Down] and confirm it with [OK] to switch to it. In bigger groups you can navigate with [Page Up/Page Down]. 3. With [Volume Up / Down] you can select different Favorite Groups. 4. Press [Exit] to close the Favorite Group window. 2.
BASIC OPERATIONS 3.CHANNEL OSD 6 Press [Menu] in the TV mode to enter the main menu. 1. Press [Channel Up/Down]• to select the Channel item. 2. Press [OK] to enter the selected item. In the Channel menu: 1. Press [Channel Up/Down]• to select the wanted menu item among TV Channel, Radio Channel and Delete All. 2. Press [OK] to enter the selected item. 3.1 TV CHANNEL LIST OSD 7 When you enter to “Channel List” menu, there will display the screen like below (OSD 8). ] key and press 1.
MENU OPERATIONS 3.1.3 FIND OSD 11 1. Press number key [3] can open the “Find” window like above (OSD 11). You can press number [0] key to [9] key to input letter or number into the dialogue. Every time you press number key it will change the letter or number. For example, every time you press number [2], it will show “a”>”b”->”c”->”2” ->”a”->… 2. After input each character, the program list on the left will search the channel according your input, and list the matched channel. 3.
MENU OPERATIONS 3.1.5.3 LOCK In “TV Channel List Edit” menu, press number key [3] can make a “lock mark” in the right side of the highlighted channel. After save and exit “TV Channel List Edit” menu, STB will request you to input the password while you want to watch the locked channel. (OSD 16) 3.1.5.4 EDIT OSD 15 OSD 16 In “TV Channel List Edit” menu, press number key [4] can enter edit box like below (OSD 17): 1 .
MENU OPERATIONS 3.3 DELETE ALL FAVORITES OSD 20 In “Delete All” item (OSD 20): 1. There will display an dialogue for user to key in password. The default Password is “0000”. 2. When you input the correct password, there will show up a warning message box to inquire you whether delete all or not. 3. If you select “Yes”, all favorite channels will be deleted. 4. In step 1 and step 2, press [Exit] key can exit the function directly without save 3.4.DELETE ALL In “Delete All” item (OSD 21): 1.
MENU OPERATIONS 4.INSTALLATION OSD 22 When you enter to “Installation” menu, there will display the screen like below (OSD 23): In “Installation” menu; 1.Press [ ] key to select menu pages among Channel, Installation, System and Tools. ] key to select menu items among each 2.Press [ items. 3.Press [OK] key to enter the selected item. 4.1.AUTO SCAN When you enter to “Auto Scan” menu, there will display the screen like below (OSD 24): 1.
MENU OPERATIONS 4.3 CHANNEL SETUP OSD 26 When you enter to “Channel Setup” menu, there will display the screen like below: 1. You can see the channel information like the picture displaying (OSD 26). ] key can move the highlight to select 2. Move the [ the channel. 3. When press [OK] key again, you can see the window like below (OSD 27): 4. Input PID information,then move highlight to “Search” item and press [OK] key, then it will begin to scan. 4.
MENU OPERATIONS 5. SYSTEM SETUP OSD 29 When you enter to “System Setup” menu, you will see the screen like below (OSD 30): In “System Setup” menu: 1.Press [ ] key to select menu pages among Channel, Installation, System and Tools. 2.Press [ ] key to select menu items among each items. 3.Press [OK] key to enter the selected item. 5.1 OSD LANGUAGE OSD 30 OSD 32 5.2 TV SYSTEM When you enter to “TV System” menu, you will see the screen like below (OSD 32): 1.
MENU OPERATIONS can press [ ] key to select each mode circularly. 5. LCN Mode can control the channel whether sort by the information in the streams. The options is: On / Off. You [Left/Right] key to select each mode circularly. 6.You can choose between VCR Master ( You see the VCR in the TV although the receiver is on ) or Receptor master ( you can see the receiver in the TV although the VCR is on). 7. Press [Exit] key to draw back from “TV System” menu.• 5.3 START UP SERVICE OSD 33 1.
MENU OPERATIONS 5.5 TIMER SETTING OSD 35 OSD 36 OSD 38 PAG. 23 ENGLISH rev 1.1 OSD 37 When you enter “Timer Setting”, you will see the window like below(OSD 35): 1. Program Timer: Select “Program Timer” item and pres [OK] key to enter “Program Timer” menu. • Current time information will display on the first column; if the current time is incorrect, please modify the time information in “Time” item. • Timer Number: You can press [ t] keys to set Timer number, and there are 8 timers in total.
MENU OPERATIONS 3. Load Default Timer Setting When you enter “Load Default Timer Setting”, you will see the window like below: •Press [OK] key on “Load Default Timer Setting”, it will show “Inpute Password” dialogue. •After you input the correct password, there will show a warning message to inquiry you “All Timers will be cleared, continue?” •If you select “Yes”, it will clear all the timer. •You can press [Exit] key to exit. 5.6 OSD SETTING OSD 40 5.
MENU OPERATIONS mark will show up a dialogue on the screen and ask for the password. If the setting of “Channel Lock ”is “No”, the Lock function will invalid. 4. New Password is used for revising password; you can input the new password in this item by using number keys directly. After you filled in 4 digital numbers, the highlight will auto skip to Confirm Password and ask you to input the new password again. If the password is correct, the screen will show up a message of “Change password successfully”.
MENU OPERATIONS 6.TOOLS OSD 41 When you switch to “Tools” menu, you will see a screen like below(OSD 42): In “Tools” menu: 1. Press [ ] key to select menu pages among Channel, Installation, System and Tools. 2. Press [ ] key to select menu items among each items. 3. Press [OK] key to enter the selected item. 6.1 INFORMATION 1. When you enter to “Information” menu, you will see a screen like above (OSD 43).
MENU OPERATIONS • Moving highlight to “Start” and press [OK] key to start the game. • Moving highlight to [Cancel] keys and press [OK] key to draw back from the game. • Start on the game: • [ /------- use these arrow keys to guide chessman. • [OK] — set chessman. • [Exit] — Quit game and draw back to “Game” menu. 6.3 LOAD FACTORY DEFAULT When you press [OK] key In the “Load Factory Default” item: 1. There will pop a dialogue for you to enter the password, and the default password is “0000”. 2.
TECHNICAL SPECIFICATIONS Video Decoding Compatible MPEG-2 & MEPG-1 Bit rate Max 15Mbps Output PAL/NTSC Aspect ratio 4:3, 16:9, Auto Active pixel 720x480 @ 30fps; 720x576 @25fps Output connector Scart Audio Decoding MPEG-2/MEPG -1 Layer I & II Sampling rate 32 /44,1/ 48 Khz Output connector Scart Imput Signal Demodulation COFDM 2k, 8k Guard 1/4, 1/8 , 1/16, 1/32 SIGNAL Frequency VHF-UHF Imput Level Miscellanous Supply voltage - 78 dBm – 20 dBm Power consumption Typ.
PART OF THE DECLARATION OF CONFORMITY CE “WE , FTE MAXIMAL, DECLARE THAT THE PRODUCTS MAX T140 IS IN CONFORMITY WITH FOLLOWING DIRECTIVES LVD 73/23/EEC EMC 89/336/EEC AS LAST AMENDED BY 93/68/EEC” rev 1.1 ENGLISH PAG.
