ENGLISH CONTENT RECEIVER MANUAL REMOTE CONTROL INFRARED SENSOR rev 1.0 POWER SUPPLY PAG.
SAFETY PRECAUTION Warning: To reduce the risk of electric shock, don’t open the cabinet. Refer servicing to qualified personnel only. The exclamation point within an equilateral triangle is intended to alert the user to important operating and maintenance (servicing). Please read the manual carefully before installing the receiver. Caution: Never open the device by yourself. Dangerously high voltages are present inside the unit. Refer servicing to qualified staff only.
QUICK INSTALLATION GUIDE QUICK INSTALLATION GUIDE Follow next steps for the correct installation of this receiver. ENGLISH STEP 1: CONNECTIONS The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the infrared sensor of the receiver during operation. If the sensor has been covered or there is a large object between the remote control and the sensor, the sensor will not respond. rev 1.
QUICK INSTALLATION GUIDE STEP 2: BASIC CONFIGURATION OF THE RECEIVER IMAGE 1 rev 1.0 IMAGE 2 PAG. 5 ENGLISH The receiver includes an installation assistant that will help you to setup the different parameters. When the receiver is turned on at first time (using the button at the rear panel of the receiver), the next menu is shown on the TV: In order to move through the different options of this menu, please use the keysof the remote control.
QUICK INSTALLATION GUIDE STEP 3: TIME CONFIGURATION rev 1.0 ENGLISH IMAGE 3 It is recommended to setup the clock before starting to enjoy the receiver, because correct time maybe is required by some applications. Please complete following options: Press the [Menu] key of the remote control for appearing the main menu. Select the “System Configuration” option and confirm pressing [OK]. Once in the “System Configuration” option, please select “Region and Time” option and press [OK].
QUICK INSTALLATION GUIDE CHANNEL TV Channel List: This option shows the list of TV stored channels. Radio Channel List: This option shows the list of Radio stored channels. Delete All Favourites: This option deletes all the favourite lists created. Delete All Channels: This option deletes all TV and Radio stored channels. INSTALLATION Auto Scan: This option make a full scan of all TV and Radio channels received. Channel Scan: This option make a compete scan of only one Multiplex. rev 1.
QUICK INSTALLATION GUIDE SETUP OSD Language: This option allows selecting different menu and options languages. TV System: This option allows choosing the video Standard and other parameters of the screen. Region and Time: In this option, the time of the receiver and user region or country can be configured. ENGLISH Timer Setting: Timer setting menu. OSD Setting: In this option, the subtitles of the channel information can be configured.
INDEX 1. Remote control & panel description 1.1.Front panel description.................................................................................11 1.2.Rear panel description.................................................................................11 1.3.Remote control description........................................................................12 rev 1.0 3. Channel 3.TV Channel List....................................................................................................
INDEX 5. System setup 5.1.OSD language....................................................................................20 5.2.TV system...................................................................................20 5.3.Region and time.......................................................................................20 5.4.Timer setting.................................................................................21 5.5.OSD setting..............................................................
CONNEXION & REMOTE CONTROL DESCRIPTION 1. CONNEXION & REMOTE CONTROL DESCRIPTION 1.1. CONNEXION DESCRIPTION ENGLISH 1 2 3 4 1. TV SCART: Output SCART for the connection to a TV set. 2. ANT IN:Terr. input of the digital tuner. 3. IN 5 VDC: 5 VDC connection (power supply). 4. IR-SENSOR: External IR sensor 1.2. REMOTE CONTROL DESCRIPTION Loading batteries to the remote control: - Pull the battery compartment stock. - Load one button battery into the battery compartment.
CONNEXION & REMOTE CONTROL DESCRIPTION 1 2 3 5 7 6 8 5 6 9 10 11 12 14 13 15 16 17 18 19 20 rev 1.0 ENGLISH 4 1. POWER: Switches receiver ON or in stand-by-mode. 2. MUTE: Switches audio on and off. 3. RECALL: Watch the last viewed channel. 4. NUMERIC KEYS: For direct typing values and names. 5. Page+/Page-: Moves cursor in block steps 6. VOL+ / VOL-: Adjusts audio volume up and down. 7. Changes channels volume or controls the cursor in menus.
BASIC OPERATIONS 2. HOTKEY 2.1 STANDBY OSD 1 1.Press [Power] button to switch from TV mode to Standby mode 2.In Standby mode press [Power] button again to switch back to TV mode. The last active channel will be showed. 3.To switch off the STB complete press the main power button. 2.2 CH+/CH- 2.3 VOL+/VOL- In TV mode, press [Volume Up/Volume Down] to adjust volume. OSD 2 2.
BASIC OPERATIONS 2.9. SUBTITLES In TV mode, press [Sub] button for activating / deactivating the channel subtitles, depending on the provider information (OSD 4). 2.10 EXIT [Exit] key can exit current menu. 2.11 MENU [Menu] key can enter the menu or exit current menu. 2.12 MUTE 1.Press the [Mute] button to mute the sound. On the screen an icon will be displayed to indicate the muted sound. 2.Press the [Mute] button again to restore the sound. 2.
CHANNEL 3.CHANNEL OSD 6 3.1 TV CHANNEL LIST OSD 7 When you enter to “Channel List” menu, there will display the screen like below (OSD 8). ] key to preview 1.You can move highlight by press [ the current highlighted program in the right side preview window. 2.You can press [Page Up/Page Down] key to implement the Page Up/Page Down function. 3.You can use [ c] key to switch “Group”. 4.You can press [OK] key to enter full screen playing mode. 5.
CHANNEL After save and exit “TV Channel List Edit” menu, STB will request you to input the password while you want to watch the locked channel. (OSD 11) 3.1.1.3 SKIP OSD 11 In “TV Channel List Edit” menu, press number key [3] can make a “skip mark” in the right side of the highlighted channel. After save and exit “TV Channel List Edit” menu, the channel will be skip while user change channel in the full screen. (OSD 12). ENGLISH 3.1.1.
CHANNEL 3.1.4 MOVE 1. Press number key[4] ,there will show a “moving mark” in the right side of the selected channel like above (OSD 16) 2. You can move the selected channel to the position that you ] key. And press [OK] key to want to place by press [ confirm your decision. OSD 16 3.2 RADIO CHANNEL LIST 3.3. DELETE ALL FAVORITES OSD 17 In “Delete All” item (OSD 18): 1. When you input the correct password, there will show up a warning message box to inquire you whether delete all or not. 2.
INSTALLATION 4.INSTALLATION ENGLISH OSD 22 Press [Menu] in the TV mode to enter the main menu (OSD 22). ] to select the Installation item. 1. Press [ 2. Press [OK] to enter the selected item. In the Installation menu (OSD 23): ] to select the wanted menu item. 3. Press [ 4. Press [OK] to enter the selected item among. - Auto Scan - Channel Scan - Tuner Setting 4.1.AUTO SCAN OSD 23 When you enter to “Auto Scan” menu, there will display the screen like below (OSD 24): 1.
INSTALLATION 4.3 TUNER SETTING When you enter to “Tuner setting” menu, there will display the screen like below (OS28): In Aerial Adjustment mode: Tuner Power: On / Off OSD 28 rev 1.0 ENGLISH PAG.
SYSTEM SETUP 5. SYSTEM SETUP ENGLISH OSD 29 Press [Menu] in the TV mode to enter the main menu (OSD 29). ] to select the System Setup item. 1. Press [ 2. Press [OK] to enter the selected item. In the System Setup menu (OSD 30): 3. Press [ ] to select the wanted menu item. 4. Press [OK] to enter the selected item among. - OSD Language - TV System - Region and Time - Timer Setting - OSD setting - Parental Lock 5.
SYSTEM SETUP OSD 34 5.4 TIMER SETTING OSD 35 OSD 36 When you enter “Timer Setting”, you will see the window like below(OSD 35): 1. Program Timer: Select “Program Timer” item and pres [OK] key to enter “Program Timer” menu. • Current time information will display on the first column; if the current time is incorrect, please modify the time information in “Time” item. • Timer Number: You can press [ ] keys to set Timer number, and there are 8 timers in total.
SYSTEM SETUP 5.5 OSD SETTING ENGLISH OSD 39 When you input to “OSD Setting” menu, you will see a screen like below (OSD 39): 1. Subtitle Display: You can press [ ] key to select “On” or “Off”. If the current channel has subtitle information, it will be showed up while this function is “On”. If this function is “Off”, there won’t show up subtitle information even if the current channel has subtitle information. 2.
TOOLS 6.TOOLS OSD 41 6.1 INFORMATION OSD 42 rev 1.0 OSD 43 1. When you enter to “Information” menu, you will see a screen like above (OSD 43). The screen displays some parameters of information of current channel, and this function same as the function [Information] in the full screen play mode. 2. Press [Exit] key to draw back from “Tools” menu. 6.2 GAME When you enter “Game” menu, you will see three Games include Tetris, Snake and Othello. Basic operation statement: 1.
TOOLS ENGLISH •[Exit] — Quit game and draw back to “Game” menu. 3. Othello • Moving highlight to “Setup” and press [Left/Right] keys to select the game level (degree of difficulty). • Moving highlight to “Start” and press [OK] key to start the game. • Moving highlight to [Exit] keys and press [OK] key to draw back from the game. • Start on the game: • [ /------- use these arrow keys to guide chessman. • [OK] — set chessman. • [Exit] — Quit game and draw back to “Game” menu. 6.3 LOAD FACTORY DEFAULT 6.
TECHNICAL SPECIFICATIONS Max 15 Mbps Output PAL/NTSC Aspect ratio 4:3, 16:9 Active pixel 720x480 @ 30fps; 720x576 @25fps Output connector Scart Audio Decoding MPEG1,MPEG2 ISO/IEC 13818-3 LAYER I&II Sampling rate 32 /44,1/ 48 Khz Input Signal Demodulation COFDM 2k, 8k Guard 1/4, 1/8 , 1/16, 1/32 SIGNAL Frequency 174 - 230 MHz, 474 - 862 MHz Imput Level -20 / -75 dBm Miscellanous Supply voltage 5 VDC / 1 A Power consumption Max.
PART OF THE DECLARATION OF CONFORMITY CE “WE , FTE MAXIMAL, DECLARE THAT THE PRODUCT MAX T21 LOW VOLTAGE DIRECTIVE 2006/95/EC EMC DIRECTIVE 2004/108/EC” rev 1.0 ENGLISH IS IN CONFORMITY WITH FOLLOWING DIRECTIVES PAG.
