MAX T90
CONTENT ENGLISH RECEIVER BATTERIES X 2 REMOTE CONTROL rev 1.1 USER’S MANUAL PAG.
QUICK INSTALLATION GUIDE rev 1.1 Warning: To reduce the risk of electric shock, don’t open the cabinet. Refer servicing to qualified personnel only. The exclamation point within an equilateral triangle is intended to alert the user to important operating and maintenance (servicing). WARNING: Do not use this STB where contact with or immersion in water is a possibility. Do not use near flower vase, washbowls, kitchen sinks, laundry tubs, swimming pools, etc.
QUICK INSTALLATION GUIDE QUICK INSTALLATION GUIDE Follow next steps for the correct installation of this receiver. STEP 1: CONNECTIONS Connect a coaxial cable from the output socket to the “Ant In” connector. Connect a coaxial cable from the “Loop” connector at the receiver to your TV input connector as it is shown in Scheme1. ENGLISH This receiver has not built in modulator so it has to be connected to the TV through a SCART cable. EXAMPLE 1 EXAMPLE 3 PAG. 4 rev 1.
QUICK INSTALLATION GUIDE STEP 2: BASIC CONFIGURATION OF THE RECEIVER IMAGE 1 rev 1.1 IMAGE 2 PAG. 5 ENGLISH The receiver includes an installation assistant that will help you to setup the different parameters. When the receiver is turned on at first time (using the button at the rear panel of the receiver), the next menu is shown on the TV: In order to move through the different options of this menu, please use the keysof the remote control.
QUICK INSTALLATION GUIDE STEP 3: TIME CONFIGURATION rev 1.1 ENGLISH IMAGE 3 It is recommended to setup the clock before starting to enjoy the receiver, because correct time maybe is required by some applications. Please complete following options: Press the [Menu] key of the remote control for appearing the main menu. Select the “System Configuration” option and confirm pressing [OK]. Once in the “System Configuration” option, please select “Region and Time” option and press [OK].
QUICK INSTALLATION GUIDE CHANNEL TV Channel List: This option shows the list of TV stored channels. Radio Channel List: This option shows the list of Radio stored channels. Delete All Favourites: This option deletes all the favourite lists created. Delete All Channels: This option deletes all TV and Radio stored channels. INSTALLATION Auto Scan: This option make a full scan of all TV and Radio channels received. Channel Scan: This option make a compete scan of only one Multiplex. rev 1.
QUICK INSTALLATION GUIDE SETUP OSD Language: This option allows selecting different menu and options languages. TV System: This option allows choosing the video Standard and other parameters of the screen. Region and Time: In this option, the time of the receiver and user region or country can be configured. ENGLISH Timer Setting: Timer setting menu. OSD Setting: In this option, the subtitles of the channel information can be configured.
INDEX 1. Remote control & panel description 1.1.Front panel description.................................................................................11 1.2.Rear panel description.................................................................................11 1.3.Remote control description........................................................................12 rev 1.1 3. Channel 3.TV Channel List....................................................................................................
INDEX 5. System setup 5.1.OSD language....................................................................................20 5.2.TV system...................................................................................20 5.3.Region and time.......................................................................................20 5.4.Timer setting.................................................................................21 5.5.OSD setting..............................................................
REMOTE CONTROL & PANEL DESCRIPTION 1. PANEL & REMOTE CONTROL DESCRIPTION 1.1. FRONT PANEL DESCRIPTION 2 3 4 1. USB: USB Connector 1.1 2.Remote Sensor: Detects the infrared signals from the remote control unit. 3. STAND BY LED: Shows the state of the receiver 4. POWER: Switches the receiver on, or enters standby mode. 1.2. REAR PANEL DESCRIPTION 1 2 3 4 5 rev 1.1 1. ANT IN:Terr. input of the digital tuner. 2. LOOP: Terr. ouput for cascading to others devices. 3.
REMOTE CONTROL & PANEL DESCRIPTION 1.3 REMOTE CONTROL DESCRIPTION 1 12 14 15 13 11 8 10 18 16 6 3 2 19 7 17 20 9 5 2. HOTKEY 2.1 STANDBY 1.Press [Power] button to switch from TV mode to Standby mode 2.In Standby mode press [Power] button again to switch back to TV mode. The last active channel will be showed. 3.To switch off the STB complete press the main power button. 2.2 CH+/CH- In TV mode press [Channel Up/Channel Down] to change channel. 2.
BASIC OPERATIONS 2.5 TV/RADIO In TV mode, press [TV/RADIO] to switch to Radio mode. In Radio mode press [TV/RADIO] again to switch back to TV mode. 2.6 CHANNEL LIST 1. In full screen, press [OK] / [List] key can enter “Channel List”, please refer to TV Channel List for detail information (OSD 1). OSD 1 2.7 AUDIO 2.8 EPG OSD 2 1.The STB has an Electronic Program Guide (EPG) to help you navigate channels through all the possible viewing options.
BASIC OPERATIONS 2.14 INFORMATION In TV mode, press [INFO] button can open information screen, in the window shows the parameters of current channel (OSD 5). 2.15 PAGE+/PAGEIn full screen, press [ 2.16 TTX 1.Press [TXT] button in TV mode to open the teletext page. This service is depending on the support of the channel provider. 2.If the channel does not support teletext information, it will show “No Teletext Data” on the screen. 2.17 FAVOURITES 1.
CHANNEL 3.CHANNEL OSD 6 3.1 TV CHANNEL LIST OSD 7 When you enter to “Channel List” menu, there will display the screen like below (OSD 8). ] key to preview 1.You can move highlight by press [ the current highlighted program in the right side preview window. 2.You can press [Page Up/Page Down] key to implement the Page Up/Page Down function. 3.You can use [ c] key to switch “Group”. 4.You can press [OK] key to enter full screen playing mode. 5.
CHANNEL After save and exit “TV Channel List Edit” menu, STB will request you to input the password while you want to watch the locked channel. (OSD 11) 3.1.1.3 SKIP OSD 11 In “TV Channel List Edit” menu, press number key [3] can make a “skip mark” in the right side of the highlighted channel. After save and exit “TV Channel List Edit” menu, the channel will be skip while user change channel in the full screen. (OSD 12). ENGLISH 3.1.1.
CHANNEL 3.1.4 MOVE 1. Press number key[4] ,there will show a “moving mark” in the right side of the selected channel like above (OSD 16) 2. You can move the selected channel to the position that you ] key. And press [OK] key to want to place by press [ confirm your decision. OSD 16 3.2 RADIO CHANNEL LIST 3.3. DELETE ALL FAVORITES OSD 17 In “Delete All” item (OSD 18): 1. When you input the correct password, there will show up a warning message box to inquire you whether delete all or not. 2.
INSTALLATION 4.INSTALLATION ENGLISH OSD 22 Press [Menu] in the TV mode to enter the main menu (OSD 22). ] to select the Installation item. 1. Press [ 2. Press [OK] to enter the selected item. In the Installation menu (OSD 23): ] to select the wanted menu item. 3. Press [ 4. Press [OK] to enter the selected item among. - Auto Scan - Channel Scan - Tuner Setting 4.1.AUTO SCAN OSD 23 When you enter to “Auto Scan” menu, there will display the screen like below (OSD 24): 1.
INSTALLATION 4.3 TUNER SETTING When you enter to “Tuner setting” menu, there will display the screen like below (OS28): In Aerial Adjustment mode: Tuner Power: On / Off OSD 28 rev 1.1 ENGLISH PAG.
SYSTEM SETUP 5. SYSTEM SETUP ENGLISH OSD 29 Press [Menu] in the TV mode to enter the main menu . ] to select the System Setup item. 1. Press [ 2. Press [OK] to enter the selected item. In the System Setup menu (OSD 30): 3. Press [ ] to select the wanted menu item. 4. Press [OK] to enter the selected item among. - OSD Language - TV System - Region and Time - Timer Setting - OSD setting - Parental Lock - Auto Standby 5.
SYSTEM SETUP “GMT Offset” value, and the range is “-12:00 ~ +12:00”, increase each half hour progressively. •“Date” and “Time” items are valid only when the setting of “GMT Usage” is “Off”. You can press [ ] keys to moving highlight and use number keys to input directly. •Time display function can control whether the time will be displayed on screen or not. •Press [Exit] 5.4 TIMER SETTING OSD 34 OSD 36 rev 1.1 5.
SYSTEM SETUP Style”, you also can set the transparency of OSD. You can press [Left/Right] key to select the values. There are 5 levels of transparency, 10%, 20%, 30%, and 40% and “NO” (means no transparency function). 3. Load OSD Setting Default: If you are not satisfy with your setting, you can move highlight to this item and press [OK] key to reset parameters as default value. 5.6 PARENTAL LOCK ENGLISH OSD 39 OSD 40 You can set a password for anyone who wishes to operate in the “Installation” menu.
TOOLS 6.TOOLS OSD 41 6.1 INFORMATION OSD 42 rev 1.1 OSD 43 1. When you enter to “Information” menu, you will see a screen like above (OSD 43). The screen displays some parameters of information of current channel, and this function same as the function [Information] in the full screen play mode. 2. Press [Exit] key to draw back from “Tools” menu. 6.2 GAME When you enter “Game” menu, you will see three Games include Tetris, Snake and Othello. Basic operation statement: 1.
TOOLS ENGLISH •[Exit] — Quit game and draw back to “Game” menu. 3. Othello • Moving highlight to “Setup” and press [Left/Right] keys to select the game level (degree of difficulty). • Moving highlight to “Start” and press [OK] key to start the game. • Moving highlight to [Exit] keys and press [OK] key to draw back from the game. • Start on the game: • [ /------- use these arrow keys to guide chessman. • [OK] — set chessman. • [Exit] — Quit game and draw back to “Game” menu. 6.
MEDIA + 7. MEDIA + OSD 46 7.1. MULTIMEDIA PLAYER In this menu option you can accede and manage the contents of the HDD previously copied from your computer. You also can create playlists of music or pictures (OSD 48). Press [Menu] button to Exit. OSD 47 Preview window of the selected file Recorded files Information about the selected file. Options rev 1.1 OSD 48 PAG. 25 ENGLISH Press the key [Menu] on the remote control to go to the main menu (OSD 46). ] to settle 1.
MEDIA + - PLAYLIST OSD 49 These lists are created adding the files you want to the previous lists. You can create 2 lists: - Picture List - Music List Press [Red button] on any file from one list to play all the files contained. Press [Yellow button] on any file from one list to delete the file. Press [Blue button] on any file from one list to delete all the files contained. ENGLISH Press the keys [ ] to move along the files and press [OK] to enter and exit of the folders or open a file or playlist.
MEDIA + 7.1.4.PICTURE VIEWER 1. Press [OK] over the file .JPG that you want to show. 2. The selected picture will be shown on the screen. If the file is included into the Picture Playlist, they all will be shown in “slide show” mode. ]. (OSD You can rotate the picture with the buttons [ 52) With the buttons [Ok] you can do zoom in the picture. OSD 52 7.1.5.VIDEO .MPG PLAYER 7.1.6. HELP OSD 53 Press the button [info] or select INFO option to open the information screen.
Video Decoding MPEG2 ISO/IEC 13818-2 MP@ML Bit rate Max 15Mbit/s Output PAL/NTSC Aspect ratio 4:3, 16:9 Active pixel 720x480 @ 30fps; 720x576 @25fps Output connector TV Scart, VCR Scart Audio Decoding MPEG1,MPEG2 ISO/IEC 13818-3 LAYER I&II Sampling rate 32 /44,1/ 48 Khz Output connector Scart, Coaxial S/PDIF Input Signal Demodulation COFDM 2k, 8k Guard 1/4, 1/8 , 1/16, 1/32 SIGNAL Frequency 177.5 - 227.
PART OF THE DECLARATION OF CONFORMITY CE “WE , FTE MAXIMAL, DECLARE THAT THE PRODUCT MAX T90 LOW VOLTAGE DIRECTIVE 2006/95/EC rev 1.1 EMC DIRECTIVE 2004/108/EC” PAG.
