User’s Manual · PVR S100 Index Chapter 0 Control elements and connections 0.1. Receiver front panel..................................................................................................................... 4 0.2. Receiver back panel...................................................................................................................... 5 0.3. Remote control.........................................................................................................................
User’s Manual · PVR S100 Chapter 3 3.1 Chapter 4 Channel management TV-Channel list.............................................................................................................................. 21 3.1.1. Skip channels................................................................................................................... 21 3.1.2. Lock channels................................................................................................................... 21 3.1.3.
User’s Manual · PVR S100 Chapter 8 Parental Control 8.1. Set Lock..........................................................................................................................................33 8.2. Channel Lock................................................................................................................................. 33 8.3. Record Lock..................................................................................................................................
User’s Manual · PVR S100 Chapter 0 Control elements and connections 0.1. Receiver front panel 12 3 1 4 5 POWER: 6 Switches the receiver ON or in Standby mode. For total switching off, use the main switch at the back side of the receiver. 2 STAND-BY-LED: Shows if the receiver is in Standby mode (when LPC mode is ON). 3 LOCK LED: Indicates a sufficient signal level at the IF IN input 4 DISPLAY: 4 Digits to display the program numbers.
User’s Manual · PVR S100 0.2. Receiver Back Panel 1 2 3 7 8 9 4 10 5 6 11 1 IF IN 2: Input of the second digital tuner 2 IF IN 1: Input of the first digital tuner 3 RS-232: Serial port to update the firmware of the receiver 4 USB: Connector for external USB 2.0 HighSpeed devices. 5 AC IN: Power cord 230VAC/50Hz. 6 POWER ON/OFF: Main switch to switch off totally the receiver 7 IF OUT 2: Output from second digital tuner.
User’s Manual · PVR S100 0.3. Remote Control 1. POWER: Switches receiver ON or in stand-by-mode. 2. 3-set LED: Shines as function control, showing the selected transmission code 1, 2 or 3 3. TV/R: Switches between TV and Radio channels. 4. CODE: Changes transmission code of the remote control. 5. MUTE: Switches audio on and off. 6. NUMERIC KEYS: For direct typing values and names. 3 Starts Picture In Picture function. PIP : 9. VOL+ VOL-: Adjusts audio volume up and down. 10.
User’s Manual · PVR S100 1. First installation 1.1 Complete Content The following goods must be included in this package when you open it for the first time. Remote Control Installation Guide Two batteries Type AAA, Micro, 1,5V Bridge for Loopthrough connection Antenna connection cable Reserved of technical modifications and/or errors -7- PVR S100 Version en_1.
User’s Manual · PVR S100 1.
User’s Manual · PVR S100 1.3 Safety rules Please read the manual carefully before using the receiver. You will receive a lot of information to use this product correctly and you will prevent incidents. Please keep the manual on a safe place. CAUTIONR RISK OF ELEKTRIC SHOCK DO NOT OPEN This sign warns you about high voltages, with risk of electric shock Caution: Do not open the housing of this receiver. Repairs can only be made by professionals authorized by Fte maximal.
User’s Manual · PVR S100 1.4 Fast installation guide Please, follow the instructions for a faster and simpler installation of the receiver. Step 1: Connections Connect the cable from the LNB and Dish: There are two possibilities of connection, based in how is the antenna installation: 1 1.- One single satellite cable: in this case, this cable should be connected to IF IN 1 connector, at back panel. The IF OUT 1 output should be connected to IF IN 2 through the supplied bridge.
User’s Manual · PVR S100 Connecting the TV, LCD or video beamer Your TV or other equipment can be connected in different ways: SCART / RGB In this connector you will find the best Picture quality in RGB and RGB-YUV modes. This is the connector that you will use normally to connect the TV. To do it, you should use a Standard SCART – SCART cable. Video / DVD In regards to scart VCR-Scart connection, you can connect a VCR or a DVD.
User’s Manual · PVR S100 Menu Language: Here you have to select the language for the Receiver menu and information. and press the OK button. Select the language with the arrow buttons Connecting type: Select the option based in your connections. Use the arrow keys to select and press OK. Time Zone: In order to the receiver is able to display the correct time and adjust the timer recordings correctly, it is needed to fix the time zone to the place you live.
User’s Manual · PVR S100 Reserved of technical modifications and/or errors - 13 - PVR S100 Version en_1.
User’s Manual · PVR S100 Selection of the Pre-Stored Channel List This option allows loading the channel list stored in your receiver, and you will not need to tune channels. The list includes Astra / Hot Bird / Hispasat / Turksat channels, and it is supposed that the same input signal is available in both inputs. If you select Load Channel List, the installation assistant finishes at this point and it begins the viewing of the channels.
User’s Manual · PVR S100 Channel Search: Once the antenna configuration is completed, you should proceed to tune the satellite channels that you have selected. There are different ways to tune the channels: through LNB, through Satellites and through Transponders. When you select the channel searching through LNB, you only can select one LNB, which corresponds to the programmed tuner.
User’s Manual · PVR S100 1.5 Menus Main Menu Channel Management Parental control Activate parental control. Move, rename or delete channels, Program and, create favourite list. PVR Management Administration for recordings, Pictures and MP3 files as well as connecting external USB devices. Timers Administration for recordings, manual activation for timer events. Reserved of technical modifications and/or errors Tools Calculator, Calendar with date management.
User’s Manual · PVR S100 Chapter 2 Standard Functions 2.0 Switch on the receiver The receiver has a main switch at the back panel. To switch on, take the switch in position 1. Now the receiver begins to run and show information on its display. 2.1 StandBy To switch the receiver from Standby (sleep mode) to the working mode, press Orange Power button on the left corner at the top of the remote control.
User’s Manual · PVR S100 2.8. Stop the functions With the Exit button you can stop functions like channels search or close menus. 2.9. Open Main menu To open the main menu, you have to press the button MENU . The menu system is made in a tree structure. 2.10. Watch the last viewed channel With the Back button, you can access to the channel viewed previously. 2.11. Channel list When all the menus are closed, you can open a channel list by pressing the button OK.
User’s Manual · PVR S100 2.13. Favourite channel list If no menu is opened, you can get your favourite channels list by pressing the button FAV . With the buttons Pup / Pdw you can switch between 8 different lists, if you have marked channels before. With the buttons you can select a channel from this list. 2.14. Menu Audio If all menus are closed you can open the menu Audio by pressing the Audio button. You can change here the audio output in Stereo, Left and Right audio format..
User’s Manual · PVR S100 2.19. Short-circuit protection If you see one message like this, you have a short circuit or to high power in the antenna system. In this case switch off the receiver and check the system. The displayed information stops automatically when the problem is solved. 2.20. Fast record If you want to record one event immediately you must press only the button REC on the remote control. You will see the event as usually and you will see a red point for a while in screen.
User’s Manual · PVR S100 Chapter 3 Channel Management 3.1. TV-Channel list Here you will find an overview about all channels. Channels can be administrated, moved, deleted or blocked. The navigation is with the buttons and . With the button TV/R you will switch between TV and Radio channels. With the button LIST you can sort this list as follows: POS, Position in channel list Name, alphabetically FTA / CAS sort by free or coded channels To see the PID information, you have to press the button TEXT.
User’s Manual · PVR S100 3.1.4 Delete channel groups or all channels If you want to delete a channel group or all channels, you have to select them and than press the Green button Del. Group. In the following submenu you should choose all channels from one MUX or All channels. With the OK button the selection will be done 3.1.5 Edit channels If you want to move channels in their position in channel list or you want to change their name, you can do it in the submenu Edit Channel.
User’s Manual · PVR S100 Chapter 4 PVR Management IMPORTANT: This menu will be only available when it is connected to an external Hard Disk USB 2.0 properly formatted (FAT 32) as well as detected by the receiver. The PVR Management is similar to a file viewer. Ordering recorded files options. Pre-viewing window of the selected file. Stored files And folders Information of the selected file. 4.1. Play record If you want play one record, you can do it by pressing the button OK. 4.2.
User’s Manual · PVR S100 4.5. Sorting In order to have a better view, you can sort the files. Please press the button LIST. With Sort A to Z: Sort Date: Sort Size: Sort None: buttons you can select the following options: Sort the files related to the first letter of the name in A,B,C…. Sort the files related to the file date. Sort the files related to the file size. No sorting 4.6. HDD Management In the HDD management submenu you can see the capacity of the hard disk.
User’s Manual · PVR S100 4.6.4 Add folder In the menu of Record Management, push the Text (Copy) button and you will enter in a submenu. With the Yellow (Add) button, you can add a new subfolder. The keyboard handling is like in a mobile phone. When you press one button several times you will have different results. Example: If you press button 2: a, b, c and 2 With the arrow buttons you can move the cursor in its position.
User’s Manual · PVR S100 Chapter 5 Timers In menu Timers you get one overview about all events which you have stored. These events can be store over EPG or direct in this menu. Menu options List with all events including channel name and name for the event Start and recording time Frequency and PID information for the selected event Menu options 5.1. Sorting For having a better view, you can sort the events. Please press for this the button LIST.
User’s Manual · PVR S100 Title You can modify an existing title or create a new one. buttons. If you want to change it, select this line by The keyboard handling is like in a mobile phone. When you press one button several times you will have different results. Example: If you press button 2: a, b, c and 2 you can move the cursor in its position. With the arrow buttons In this menu, the Green button changes between normal and capital letters and the RED button deletes letters.
User’s Manual · PVR S100 Chapter 6 Tools In this menu you can find two little helper tools. The calculator is useful for fast calculations and with the calendar you can mark dates for special events like birthdays. 6.1. Calculator The using of the calculator is very easy. With numeric block remote control, input the numbers. For the calculations you use the colour buttons. Red Button Green Button Yellow Button Blue Button Addition Subtraction Multiplication Division The button OK is used for = function.
User’s Manual · PVR S100 Chapter 7 System Settings In the menu System Settings you will find all basic adjustments of the Receiver. 7.1. Menu Language Here you can choose the language which will be shown in the receiver. You can select: English, German, French, Spanish, Italian, Portuguese Please select with the buttons and then press OK. 7.2. Audio Language Here you can choose the audio language for the TV and Radio channels.
User’s Manual · PVR S100 7.4. TV Settings Here you can adapt your receiver to your TV set and you can select the screen format. TV-System Select here which TV system your TV set support. Selection: NTSC, PAL, Secam and AUTO . Please change with the buttons TV-Format Select here which TV format your TV set has available. Selection: 4:3, 16:9 and AUTO, please change it with the buttons . Picture Format This option is only available when you have not selected TV format in mode AUTO.
User’s Manual · PVR S100 7.5. Recording Settings Impulsive Recording Limit Select here how much time do you want to record when you activate the function Fast Recording. Selection: 1, 2 or 4 hours HDD Manager Not available in this model USB In this menu you will see the total space and the free space of your USB device. You also can format this device. Margin REC EPG (Before) Here you can indicate if you want that the recording begins before the starting time of the EPG.
User’s Manual · PVR S100 7.7. Version Here you get information about the hard and software from your receiver. Manufacture Model Hardware Loader Software FP Software CRC Manufacture of the receiver. Exact article name. Revisions number from main PCB Version for boot loader Version for installed software Version for VFD display Beginning of the warranty time Checksum of the EEprom 7.8.
User’s Manual · PVR S100 Chapter 8 Parental Control With this menu, you can activate the parental control where is necessary to give one password before opening channels or making settings. 8.1. Set Lock To activate the parental control, select with and then press . button Set Lock You have to give the standard code 0000 or your individual one with the numeric block from the remote control. Then press OK button. 8.2.
User’s Manual · PVR S100 Chapter 9 Installation In this menu, you can make the complete installation of the channels, configuring the antennas, Transponders, importing channel lists or making backup copies (backup). 9.1. Connection Type In this menu, you can configure the inputs to be viewed. One LNB: In this case, you only will have channels in one tuner.
User’s Manual · PVR S100 9.2. Antenna Configuration In this menu you should configure the signals that are connected at the inputs IF IN of your PVR. By default, the equipment comes with the configuration that you can see in the Picture with four satellites. The available options in this screen allow: Red button: Deletes the selected satellite. It requests for confirmation. Green button: Edits the selected satellite. The option appears in the following image. Yellow button: Adds a satellite.
User’s Manual · PVR S100 9.3. Channel Search Once the antenna configuration is completed, you should proceed to tune the channels from the selected satellites. There are different ways to tune the channels: through LNB, through Satellites and through Transponders.
User’s Manual · PVR S100 Begin searching pressing the Green button. Once the searching process is finished (the time will depend on the number of transponders to be found), you will get a window as the following one: TV Channels detected Radio Channels detected Level and Quality meter Searching process You can stop the channel searching whenever you want pressing the Exit key. Once the search is finished, you should confirm the storage of the new channel list. Press the OK button.
User’s Manual · PVR S100 Skip Satellite With this function it is possible to skip one satellite in the fast searching channels process. The marked channels will be not selected where you search channels. Please, ensure that you mark the satellites correctly. It will appear in the right column the icon: and To select the satellites, use the buttons You can place marks in more than one satellite. . Press the Blue (Skip) button to mark them. 9.5.
User’s Manual · PVR S100 9.7. Backup In this menu you can save your backups or preferences. Load Backup It loads a backup from the internal memory of the receiver. Save Backup It saves a backup copy in the internal memory of the receiver. It overwrites whatever copy which was stored before. Delete Backup It deletes the backup of the internal memory of the receiver. Load configuration It loads the configuration from your Hard Disk. the line Select with the buttons Load Configuration and then press OK.
User’s Manual · PVR S100 Chapter 10 Equipment features 10.1. Technical Data The features of the SAT depend only in its hardware and in its electronic. The majority of the functions are executed by the software.
