User`s manual

User’s manual · TSQ 310
- 14 - TSQ 310 version_en_1.1 FTE maximal
- Add Services
1. Select the option “Add services”
through Up/Down buttons. Press OK
to continue.
2. Select one of the transponder
services you want to add, through
Left/Right keys and select the “+Add”
button to include the service in the
multiplex
3. A window will appear and it will let
you know that the operation made has
been correct.
- Delete Services
1. Select the option “Delete services”
through Up/Down buttons. Press OK
to continue.
2. Select the service you want to
delete with the Left/Right keys. Then
press OK over “-Rem” in order to
remove it, or press OK over “--All” in
order to delete all the services of the
multiplex.
3. A window will appear and it will let
you know that the operation made has
been correct.
Note: It is not recommended to exceed the 85% of the maximum capacity of the multiplex due to the possible
variability of the bits rate of the inputs services.
- LCN: The LNC function allows assigning automatically a predetermined position
to each one of the services of the multiplex. This function will allow the users who
have a receiver with LNC support to make the ordination of channels
automatically.
Select a channel through Left/Right buttons and introduce the position. Press the
“OK” button and the cursor will be placed over the number. With the keys of the
cursor, we can move through all the digits and change the values. Press “OK” in
order to save the changes
Note: If in the existing installation there are already services that have LNC system, you will have to configure
the position of the module services in order to avoid conflicts with other net services.
- Date / Hour: Setting of the date and time of transmodulator. It is appropriate to maintain these parameters set in order to
have the registration of errors linked to the current time and date.
- SW version info: It allows you to visualize the basic information of the module: model, firmware version, etc.
- Global Update: It allows carrying out the update of all the modules that are interconnected at the same time.
TSQ 310
Operation finish
TSQ 310
Input 083 %
PID:06000 Das Erste
-Rem --All
TSQ 310
BW usage 083%
>Delete services
Add services
TSQ 310
Operation finish
TSQ 310
Input 035 %
PID:06200 arte HD
+Add
TSQ 310
BW usage 000%
Delete services
>Add services
TSQ 310
LCN:00004 arte HD