User`s manual

User’s manual · TSQ 310
- 3 - TSQ 310 version_en_1.1 FTE maximal
Stages of transmodulator TSQ 310
Input
Selection of a tuned satellite transponder
Transmodulation
The tuned channels of the transponder are modulated according to the DVB-C rules. If the transponder has encoded
channels, the final user will need a receiver with CI+ subscriber card or an encrypted channels receiver.
Out
Configuration of the channels and output parameters
1.4. Programming
TSQ 310 has two ethernet connectors. In order to make the programming of the module you have to connect the
corresponding programmer to PRO 201 connector.
You can make the programming through the PRO 201 programmer and also through the mediaMAX EVO and mediaMAX
MINI field strength meter.
1.4.1. Programming modes
With mediaMAX EVO / mediaMAX MINI field strength
meter you can carry out the programming of all the
modules consecutively as long as they are interconnected
with each other through the RJ-45 cable supplied with
each unit.
Through PRO 201, the programming is made module by
module.