User Manual

II. MAINTENANCE
Motor Wheels Assemblies Maintenance
1. Use a flat head screwdriver to remove
large clumps of grass that are caught in
the treads of the motor wheels.
2. Once the large clumps are removed,
brush off the remaining dirt and grass
with a cloth.
3. There are six long screws that attach
the treaded wheel to the motor hub.
Using a Phillips screwdriver, check that
these are well secured.
4. Additionally there is one short Phillips
head screw and a 4 mm hex clamp that
holds each motor onto the CaddyTrek’s
main frame. It is important that these
are always well secured to prevent the
motor wheel assembly shafts from
slipping out from the mounts motor.
Recommended Maintenance: Daily
Pg. 9