User Manual

I. UNIT OPERATION
Powering up the CaddyTrek
1. Power on the CaddyTrek by pressing the far left button on the
dashboard
2. Position yourself behind the large wheels of CaddyTrek, then power on
the handset. Point the handset towards CaddyTrek to establish
communication. You will hear two short beeps once the
communication link is established.
3. CaddyTrek will be in the Standby Mode (SB) with the SB LED light
flashing.
Charging the Battery
Charging the battery and handset can take
place practically anywhere there’s an outlet.
Garage or storage area is probably most
practical.
The charger works on a regular 110 volt
outlet and charging time takes about six to
seven hours.
Plug the charger into the charger port located on the battery inside the
electronics box. The CaddyTrek is charged prior to shipping, so it is not
necessary to charge prior to using.
Pg. 2