User Manual

I. UNIT OPERATION
Standby (SB) Mode
Standby Mode is a starting point for all other modes. When turned on
the unit will automatically enter into SB mode and wait for further
instruction from the user.
While in SB mode:
1. CaddyTrek’s wheels will be locked.
2. The unit will automatically sync with the handset.
3. You should not push the CaddyTrek.
Manual Push Mode (use on level ground)
1. Make sure CaddyTrek and the handset are powered off.
2. Guide CaddyTrek with the push bar.
3. CaddyTrek will not automatically brake when the power is off, so
use caution on hills and steep slopes.
Remote Control (RC) Mode
1. Power on the CaddyTrek.
2. Position yourself behind the large wheels of CaddyTrek with your
chest facing the caddy.
3. Hold down the “Left” directional button until the handset emits a
short beep and the RC light will turn on.
4. To stop the unit, press the STOP button once.
Follow (FL) Mode
1. Position yourself in front of the large wheels of CaddyTrek with your
back facing the caddy.
2. Clip and center the handset on your back waistline or belt.
3. Hold the Follow button till you hear a short
beep.
4. Start walking and the CaddyTrek will follow at
your pace.
5. To stop the CaddyTrek while in FL mode, press
Follow or Stop.
6. You will hear one long and one short beep
indicating the unit is in SB mode.
Pg. 3