User's Manual

- 14 -

Recommended separation distances between

portable and mobile RF communications equipment and the

[EQUIPMENT or SYSTEM].

The [EQUIPMENT or SYSTEM] is intended for use in an electromagnetic environment in which radiated RF

disturbances are controlled. The customer or the user of the

[EQUIPMENT or SYSTEM] can help prevent

electromagnetic interference by maintaining a minimum distance between portable and mobile RF

communications equipment (transmitters) and the

[EQUIPMENT or SYSTEM] as recommended below, according to

the maximum output power of the communications equipment.

Rated maximum

output power of

transmitter

(W)

Separation distance according to frequency of transmitter

(m)

150 KHz to 80 MHz

Pd 167.1=

80 MHz to 800 MHz

Pd 167.1=

800 MHz to 2.5 GHz

Pd 333.2=

0.01

0.117 0.117 0.233

0.1

0.369 0.369 0.738

1.167 1.167 2.333

3.689 3.689 7.379

100

11.667 11.667 23.333

For transmitters rated at a maximum output power not listed above, the recommended separation distance d in

metres (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the

maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.

NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.

NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption

and reflection from structures, objects and people.

FCC ID: 2ADNQFTF21BT

This device complies with Part 15 of the FCC Rules. Operation is subject to the

Following two conditions:

(1) This device may not cause harmful interference, and (2) This device must accept any

interference received , including interference that may cause undesired operation.

Explanation of Symbols:

Symbol for batch code

Symbol for manufacturer

LOT