User's Manual

The thermometer can be worn as:
0 Patched On: The sensing probe and the main unit are
both attached to the skin directly or
0 Clipped On: The sensing probe is attached to the skin
directly but the main unit is attached to the shirt.
Patched On Method
a) Remove the film from one side of the adhesive patch and
place
the patch on top of the holder. Then place the holder
on the battery cap.
b) Rem
ove the film from the other side of
the
adhesive p
atch.
c) Remove the film from the silico
ne patch. Then attach the
silicone
patch to the opposite side of the sensing probe as
illustrated below.
d) Gentl
y lift your child’s arm. Attach the main unit under the
shirt, closer to the armpit. Then attach the sensing probe to
the armpit. Carefully place your child’s hand down.
Clipped On Method
b) Gentl
y lift your child’s
arm. Place the main unit
under the shirt
near the armpit and secure it with the
holder on top of the shirt so that the cloth is between
the main unit and the holder. Attach the sensing
probe to the armpit. Carefully place your child’s hand
down.
a) Remove the film from the silicone patch. Then
att
ach the silicone patch to the opposite side of the
sensing probe as illustrated below.
Measure Page
Measure/
A
ctivity
Graphic
c) Tap any of the menu items:
0 My Guardi Angel: View the
paired thermometers.
0 My Kids: Modify your child’s
profile or add a new child.
0 Add Events: Modify an existing
event or create a new event
and assign a category.
0 History: Tap on the day in the
calendar marked with pink dot (
) to view
the measurement history on that day.
0 Measure: Measure the currently selected child’s
temperature. See more in Measuring the Temperature.
0 Add thermometer: Add more Bluetooth thermometers.
0 Settings: Read the regulatory information, log out the
current user and clear the data, and/or switch the temperature
measurement unit between Celsius (
º
C) and Fahrenheit (
º
F).
Measu
ring the Temperature
The GuardiAngel app allows you to measure the body
temperature of multiple children. You can take a single
measurement and/or continuously monitor the temperature of
each child.
a) Make sure the thermometer is firmly attached to your
child's body.
b) Open the GuardiAngel app.
c) Tap the thermo
meter icon,
for example
.
d) Select the child’s profile you w
ant to
measure his/her
body temperature.
e)Ta p
and select Measure.
f) Select the mea
surement method:
0 Single Measurement: Tap and
follow the on-screen instructions.
- Continuous Measurement:
Continuous measurement is turned on
by default. To stop continuous
measurement, tap Stop.
g) Tap to view the measurements
and activity in a graph. Tap
to return to the Measure page.
h) T
ap
for additional information
i)
on measuring the body temperature.
j) T
ap
for alarm temperature configuration.
k) Ta
p
to disconnect the thermometer.
changes or modifications not expressly approved by the party
res
ponsible for compliance could void the user’s authority to
operate the equipment.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures: --
Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for
help.
Using the GuardiAngel App
a) After the Bluetooth pairing is
complete, tap the thermometer logo
(
). You are then prompted to enter
your child’s personal information as
well as set the high and low body
temperature for the alarm
configuration. After entering the
required information, tap Create.
b) T
ap
or swipe the screen to the
right to access the GuardiAngel m
ain