Owner's Manual

www.fuegoliving.com
7. Screw the black handle onto
the threaded end of the rod tight
to the locking nut. The balance
weight should be able to freely
rotate as the rod spins.
8. Install the slotted nut loosely
onto the rod and slide down
toward the handle.
9. Install the two sets of forks
onto the rod with the forks pointed
inward at one another.
10. Align the square end of the
rod with the motor and insert the
rod into the motor.
11. Align the slot on the slotted
nut with the upper firebox support.
12. Plug the rotisserie motor into
a standard 110V power supply.