Elliptical Trainer Owner's Manual

FE46 Elliptical

 UNPACKING THE UNIT

1. Using a razor knife (Box Cutter) cut the outside, bottom, edge of box along the dotted Line. Lift

box over the unit and unpack.

2. Carefully remove all parts from carton and inspect for any damage or missing parts. If damaged

parts are found, or parts are missing, contact your dealer immediately.

3. Locate the hardware package. The hardware is separated into steps. Remove the tools first.

Remove the hardware for each step as needed to avoid confusion.

FE46 ASSEMBLY PACK CHECK LIST

Step 1

Assembly Instructions

(

FE46 )

#119. 3/8" x 3-4/3"

Hex Head Bolt (3pcs)

#94. 3/8"x 19 x1.5T

Flat Washer (2pcs)

#114. 3/8"x 23 x2T

Curved Washer (1pc)

#78. M5 x 10m/m

Phillips Head Screw (4pcs)

#120. 3/8" x2T Split

Washer (3pcs)