Hall Tree Version:09/09/2022 1/16
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 46 6 x 35 mm Ex4 C x 42 B x 46 15 x 10 mm 6 x 30 mm Gx8 Fx8 3 x 14 mm Ix2 4 x 35 mm Kx2 Jx2 4 x 12 mm 3/16 Dx2 4 x 40 mm H x 12 5 x 20 mm
/16
1 Ax8 6 x 35 mm Insert quickfit screw(A) into corresponding holes in No.1, No.2 and No.3 plate with a screwdriver as shown.
2 A x 12 6 x 35 mm Insert quickfit screw(A) into corresponding holes in No.4, No.6, No.16(x2) and No.19(x2) plate with a screwdriver as shown.
Ax2 3 Bx4 6 x 35 mm Cx4 15 x 10 mm E x4 F x8 6 x 30 mm 3 x 14 mm Insert quickfit screw(A) into No.5 plate with a screwdriver as shown. Fix part(E) to it with screw(F). I II III F F F E E F F E E E 5 A A A 180° B B 5 B B C C C 4 C B C 6 7/16 Attach No.5 and No.6 plate to No.4 with wooden dowel(C), then turn cam lock(B) clockwise to tighten as shown.
4 Bx8 15 x 10 mm C x 10 6 x 30 mm Connect No.2 and No.3 plate with the assembled component using wooden dowel(C) and turn cam lock(B) clockwise to tighten as shown. C I II 如图所示 ；2，3，4，板插入C木榫，与 1号 C C C C B 2 4 B 5 C C 180° B C B C C C B 3 B 2 13 x B B 2 16 x Attach No.16 plate to No.13, then turn cam lock(B) clockwise to tighten as shown.
5 B x 10 Cx 2 6 x 30 m m 15 x 10 mm Connect No.18 plate with No.19 and turn cam lock(B) clockwise to tighten as shown. I II III 板 18 19 B B B 19 18 B 180° C B B 180° C Attach No.7 plate to No.5, then turn cam lock(B) clockwise to tighten as shown. B 1 B 2 4 9 B 5 C B B B 7 9/16 3 Slide No.9 plate into grooves and cover No.1 plate to the top with wooden dowel(C), then turn cam lock(B) clockwise to tighten as shown.
6 A x 20 6 x 35 mm Insert quickfit screw(A) into corresponding holes in both sides of No.11 and No.12 plate with a screwdriver A as shown.
7 Cx8 B x 10 Ax4 6 x 35 mm 15 x 10 mm 6 x 30 mm Attach No.18 and No.19 component to No.12 plate with wooden dowel(C) and turn cam lock(B) clockwise to tighten as shown. I 18 B B B II III B 19 C C C B B B B C B B 12 180° C B C C C C A Insert quickfit screw(A) into corresponding holes in No.12 plate with a screwdriver as shown.
Cx2 Bx2 8 Gx 4 6 x 30 mm 15 x 10 mm 4 x 35 mm Slide No.20 plate into grooves as shown. I Attach No.11 plate to the bottom with wooden dowel(C) and fix with screw(G) as shown. II Insert cam lock(B) into No.7 plate and turn them clockwise to tighten.
9 Gx 4 C x8 Bx4 15 x 10 mm 6 x 30 mm 4 x 35 mm Attach No.13(x2) plate to No.12 with wooden dowel(C) and turn cam lock(B) clockwise to tighten as shown. I B C II III 13 B 180° C B 12 13 C B Attach No.14 and No.15 plate to No.12 with screw(G) as shown.
C x8 B x8 10 15 x 10 mm H x 12 6 x 30 mm Slide No.19 plate into grooves as shown. I II III 19 13 H Insert part(H) into No.13(x2), No.14 and No.15 plate. H 14 H 15 H Connect the two components with wooden dowel(C) and turn cam lock(B) clockwise to tighten as shown.
11 I x2 J x2 4x12 mm I J J I Fix part(J) to No.1 plate with screw(I) as shown.
12 K x2 K K K Drill holes on your wall, and knock part(K) into. 13 D x2 4 x 40 mm D D D Install anti-tipping device with screw(D) as shown.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
