Hall Tree Version:25/12/2023 1/31
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size Ax34 Bx34 Cx58 Ø6x30mm Dx13 Ø4x35mm Ø6x35mm Ø15x10mm Ex12 Fx1 Gx12 Hx21 Ø6x60mm M4mm Ø10x10mm Ø20mm Ix24 Jx4 Kx4 Lx4 Ø3.
Qx8 Sx4 Rx2 Ø4x14mm Ux2 Ø6x30mm CLx2 Vx4 300mm DLx2 300mm Tx2 DRx2 300mm 4/31 CRx2 300mm
1 10 5 6 4 3 7 11 2 8 11 9 26 14 12 17 20 13 15 24 22 16 19 18 25 23 x2 5/31 21
1 Ix6 Ø3.5x12mm I 15 CLx1 CRx1 L300mm L300mm I CR I CR I I CL I 15 CL ! 15 ! Ix3 Ix3 CL CR Attention, second hole Fix slide rail(CL) and (CR) to right and left side of board 15 with screw(I) as shown. Attention, First hole 2 Cx2 Dx2 Ø6x30mm Ø4x35mm upper/obere ! D 16 Attach board 16 to 15 with wooden dowel(C) and fix with screw(D) as shown.
3 Dx2 Ø4x35mm Fix board 12 to board 16 with screw(D) as shown. 15 16 12 16 12 D D 4 Ax2 Ø6x35mm Cx2 Jx2 Ø6x30mm Ø4x35mm Insert quickfit screw(A) into board 17 with screwdriver. Attach board 20 to 17 with wooden dowel(C) and fix with screw(J) as shown.
5 Bx2 Ø15x10mm Cx2 Ø6x30mm Attach board 17 to 15, add cam lock(B) into board 15, and turn clockwise to tighten. 17 15 C C 17 B 16 15 C B 12 6 Ax1 Ø6x35mm Insert quickfit screw(A) into board 19 with screwdriver.
7 Bx1 Ø15x10mm Attach board 16 to19, add cam lock(B) into board 16, and turn cam locks clockwise to tighten. 19 I B 15 16 16 II 17 12 8 Cx6 Ø6x30mm Insert wooden dowel(C) into corresponding holes in board 19,20,17 and 12 as shown.
9 Ix3 Ax2 Ø6x35mm CRx1 Ø3.5x12mm L300mm Fix slide rail(CR) to board 14 with screw(I) as shown. Insert quickfit screw(A) into board 14 with screwdriver. I I I CR CR A 14 A 14 14 Bx2 10 Ex4 Ø15x10mm Fx1 Ø6x60mm Gx4 M4mm Attach board 14 to the component, turn cam lock(B) clockwise to tighten, insert part(G) to corresponding holes, G then fix with screw(E).
Ex2 Cx2 11 Ø6x30mm Fx1 Ø6x60mm M4mm Gx2 Ø10x10mm Connect board 18 to 14 with wooden dowel(C), insert part(G) to corresponding holes,then fix with screw(E).
Cx8 13 Ø6x30mm Insert wooden dowel(C) into corresponding holes in board 19,20,17,12 and 18 as shown. C C C 12 C 17 18 C C C C 17 19 20 20 14 14 Ax2 Ø6x35mm Ix3 CLx1 Ø3.5x12mm L300mm Fix slide rail(CL) to board 13 with screw(I) as shown. Insert quickfit screw(A) into board 13.
Bx2 15 Ex6 Ø15x10mm Fx1 Ø6x60mm Gx6 M4mm Ø10x10mm Attach board 13 to the component, turn cam lock(B) clockwise to tighten, insert part(G) into holes, then fix with screw(E).
16 Hx6 Kx4 Ø20mm Ø15mm 14 K 14 K K E H 17 13 x6 K Ax4 Cx8 Ø6x35mm Ø6x30mm Insert quickfit screw(A) and wooden dowel(C) into board 17 as shown.
Dx1 Cx2 18 Ø6x30mm Ø4x35mm Attach board 5 to 4 with wooden dowel(C) and screw(D) as shown. 5 C C C 4 5 4 D 19 Ax2 Ø6x35mm Insert quickfit screw(A) into board 6 at first.
20 Cx2 Bx2 Ø15x10mm Lx4 Mx8 Ø6x30mm Attach board 6 to 4, add cam lock(B) into board 4, and turn clockwise to tighten. Fix part(L) to board 7 with screw(M) as shown.
21 Ax2 Ø6x35mm Insert quickfit screw(A) into board 7 and 9 at first. A 7 9 A 9 22 Cx2 Bx2 Ø15x10mm Ø6x30mm Coonect board 8 to board 7 and 9 using screw(C), add cam lock(B) into board 8 and turn clockwsie to tighten as shown.
23 Cx4 Ø6x30mm Connect board 7 to 4 with wooden dowel(C) as shown.
Cx4 24 Ø6x30mm Slide board 11 into available slots as shown. Insert wooden dowel(C) into board 4 and 6 as shown. 4 6 7 C C 8 9 11 Ax5 25 Ø6x35mm Insert quickfit screw(A) into board 3 at first.
26 Bx5 Cx4 Ø15x10mm Ø6x30mm Attach board 3 to the component, add cam locks(B) into board 4,7 and 9, add turn clockwise to tighten. Insert wooden dowel(C) into corresponding holes in board 4 and 6 as shown.
27 Ax5 Ø6x35mm Slide board 11 into available slots as shown. Insert quickfit screw(A) into board 2.
28 Bx5 Ø15x10mm Attach board 2 to the component, add cam locks(B) into board 9,7 and 4, add turn clockwise to tighten.
29 Cx6 Ax5 Ø6x35mm Ø6x30mm Slide board 10 into available slots as shown. Insert wooden dowel(C) into corresponding holes in board 2,5 and 3 as shown. Insert quickfit screw(A) into corresponding holes in board 1 with screwdriver.
30 Bx5 Hx5 Ø15x10mm Ø20mm Cover board 1 to the top of unit, add cam lock(B) into board 2,5 and 3 and turn clockwise to tighten.
31 Bx4 Hx4 Ø15x10mm Ø20mm Connect 2 assembled components, add cam locks(B) into board 2 and 3 and turn cam clockwise to tighten.
32 Ox28 Nx28 Px3 Rx2 Qx8 Ø3x14mm Sx2 Ø4x14mm Fix back board with part(N) and screw(O) as shown. Fix anti-tipping device(R) to board 10 with part(S) and screw(Q) as shown. Fix part(P) to board 9 and 12 with screw(Q) as shown.
33 Ax4 Cx4 Ø6x35mm Ø6x30mm Insert quickfit screw(A) into board 21. Attach board 23 and 24 to board 21 with wooden dowel(C)as shown. 23 24 C A 21 21 A 23 C 21 21 x2 34 x2 Bx4 Dx8 Ø4x35mm Ø15x10mm Add cam lock(B) into board 23 and 24, turn clockwise to tighten. Slide board 15 into available slots. Attach board 22 to the component with screw(D) as shown.
35 Ux2 Vx4 Fix handle(U) with screw(V) as shown. V V 21 21 U x2 36 Ix12 Ø3.5x12mm DLx2 DRx2 L300mm L300mm DL 23 Fix runner(DL) and (DR) to board 23 and 24 respectively with screw(I) as shown.
37 26 17 21 21 29/31
38 Jx2 Sx2 Ø4x35mm WALL Tx2 Ø6x30mm WALL WALL T drilling hole Ø6x30mm x2 x2 x2 T R S J WALL T R S J Stable the item by fixing anti-tipping device(R) through part(T) to your wall with part(S) and screw(Q) as shown.
WALL 330 LBS 22 LBS 22 LBS 31/31
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
