Nightstand Version:09/16/2022 1/10
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size Ax6 6 x 35 mm E x 24 C x 14 B x 14 15 x 10mm 6 x 30 mm Gx6 Fx 3 3 x 12 mm I x 12 D x 16 4 x 14 mm H x4 4 x 18 mm J x4 4 x 30 mm 4 x 35 mm K(CL) x 3 K(CR)x 3 30 cm 30 cm 3/10 K(DL) x 3 K(DR)x 3 30 cm 30 cm
1 2 5 3 4 6 6 10 x3 8 x3 9 x3 7 x3 11 x3 4/10 6 6
E x 12 1 K(CR) x 3 K(CL) x 3 3 x 12 mm 30 cm 30 cm Fix slide rail(CL) and (CR) to No.2 and No.3 plate with screw(E) as shown.
Ax6 2 Bx4 6 x 35mm Cx8 15 x 10mm Hx4 6 x 30mm I Insert screw(H) into sides of No.2 and No.3 plate, then turn cam lock(B) clockwise to tighten as shown. H H 1 C H B 2 B III Insert quickfit screw(A) into No.8 plate with a screwdriver as shown. A 8 x3 A H II B C B A 2 C C H C Insert wooden dowel(C) into sides of No.2 and No.3 plate as shown.
3 Bx4 J x4 15 x 10mm 4 x 35 mm Connect No.2 and No.3 plate with No.1, then turn cam lock(B) clockwise to tighten as shown. I II III 如图所示 ；2，3，4，板插入C木榫，与 1号 B 2 1 B B B 3 B J Slide No.5 plate into available slots at first. 1 2 J J Attach No.4 plate to the bottom using screw(J) as shown.
4 Bx6 Cx6 15x 10 mm I x 12 6 x 30 mm 4 x 30 mm Connect No.10 and No.11 plate with No.8 using wooden dowel(C), then turn cam lock(B) clockwise to tighten as shown. I 板 B C 8 B III 如图所示 ；2，3，4，板插入C木榫，与 1号 10 11 II C x3 Slide No.7 plate into available slots at first. I 9 10 B C I 7 I I 11 8 x3 I I Attach No.9 plate to the component using screw(I) as shown.
F x3 5 Gx 6 E x 12 4 x 18 mm (DR) 板 11 30 cm 30 cm 如图所示 ；2，3，4，板插入C木榫，与 1号 (DL) K(DR) E 7 G G G E K(DL) 10 8 G E K E Fix handle(F) to No.8 plate with screw(G) as shown. F K(DR) x 3 Fix runner(DL) and (DR) to No.10 and No.11 plate with screw(E) as show. E E K 3 x 12 mm K(DL) x 3 F D x 16 6 x3 4 x 12 mm 6 DD DD 6 D D DD D D DD 4 5 Fix No.6 leg to No.4 plate with screw(D) as shown.
7 Align rails, slide all drawers.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
