Wardrobe Version:10/18/2022 1/19
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size Ax26(+1) Bx26(+1) Cx28(+2) Ø6x30mm Ø15x10mm Ø6x35mm Ex24(+2) Fx2 F-1 Jx4 Ø4x35mm Gx12(+1) Hx4 F-2 Ø4x20mm Ø3x12mm Dx18(+1) Kx8 Ø5x40mm 380mm Lx24(+2) Mx2 M-1 Ø3.
Sx4 Ux40(+3) Tx2 T-1 Vx4 T-2 Ø3x14mm Ø3x12mm 4/19 Ø25mm
1 3 14 17 4 17 22 15 5 2 22 6 16 8 7 9 20 21 24 10 12 13 19 11 23 23 10 11 18 x2 24 5/19
Qx2 1 Sx4 Ø3x14mm Fix part(S) to plate 2 and 3 using screw(Q) as shown. S S SS Q Q 3 2 2 Ax4 Ø6x35mm Insert quickfit screw(A) into corresponding holes in plate 2 and 3 with a screwdriver as shown.
3 Cx4 Bx4 Ø15x10mm Ø6x30mm Connect plate 2 and 3 with plate 4 using wooden dowel(C) and turn cam lock(B) in plate 4 clockwise to tighten as shown. I B C B C C 3 4 B C C B 2 B 4 Cx4 Gx4 Ø6x30mm Px1 Ø5x40mm Ø4mm Attach plate 1 to plate 2 and 3 using wooden dowel(C) and fix with screw(G) as shown.
Ax4 5 Ø6x35mm Insert quickfit screw(A) into corresponding holes in plate 6 with a screwdriver as shown. A A A 6 A A 6 Cx4 Gx4 Ø6x30mm Ø5x40mm Px1 Ø4mm Attach plate 6 to plate 2 and 3 using wooden dowel(C) and fix with screw(G) as shown.
7 Ex12 Hx4 Ø3x12mm 380mm H H-1 H-2 H-2 Move the black paddle H-2 upward and pull out H-2 to the right H-1 H-1 H-2 H-2 H-1 x4 x4 E E E E H-1 E H-1 H-1 Fix slide rail(H-1) to plate 7 and 8 respectively using screw(E) as shown.
8 Cx4 Gx4 Px1 Ø6x30mm Ø5x40mm Ø4mm Attach plate 9 to plate 7 and 8 using wooden dowel(C) and fix with screw(G) as shown.
Ax8 9 Ø6x35mm Insert quickfit screw(A) into corresponding holes in leg 23 and 24 with a screwdriver as shown. x2 A A A 23 10 A A A 24 Bx8 Ø15x10mm Connect leg 23 and 24 with plate 11, and turn cam lock(B) in plate 11 clockwise to tighten as shown.
11 Rx4 Px1 R-2 R-1 Ø4mm Ø10x12mm First insert (R-2) into the corresponding hole in plate 10, and then use screw(R-1) to rotate 23 clockwise to fix it. R-1 11 R-1 R-2 R-2 10 R-2 24 P R-2 10 R-1 R-2 24 11 23 12 Cx4 Dx8 Ø6x30mm Ø4x35mm R-1 Vx4 Ø25mm Attach the leg base to plate 9 using wooden dowel(C) and fix with screw(D) as shown. D D 9 10 23 C V 10 9 11 D C D D V R-1 C 24 V 10 8 24 11 D D C Cover foot peg(V) on the bottom of leg 23 and 24.
Cx4 Bx4 Ø15x10mm Ø6x30mm Connect the two assembled components using wooden dowel(C) and turn cam lock(B) in plate 7,8 clockwise to tighten as shown.
Ux40 14 N-1 Nx2 Kx8 N-2 Ø3x12mm Fix (N-2) to plate 14 using screw(N-1) . N-2 N-1 U U N-1 U U U U U K U U 14 U U U U N-2 U Two plate 22 are connected with part 15. U UU U K U K K U U 22 U U K 15 U U 3 U U UU U U U K K K K U U 22 U 16 U U U U U U U Fix back plate 14,22,16 using screw(U) as shown. Fix plate 14 with plate 22;plate 16 with plate 22 using part(K) with screw(U) as shown. 15 Lx8 Jx4 T-1 Tx2 T-2 Ø3.
16 Place clothing rod 5. 5 3 Q 5 2 17 Lx16 Ø3.5x14mm Attach door plate 17 to both sides by fixing hinge with screw(L) as shown.
18 Ax10 Bx10 Ø6x35mm Ø15x10mm Cx4 Dx10 Ø6x30mm Ø4x35mm Insert quickfit screw(A) into plate 18 at first. Attach plate 19,12 and 20 to plate 18 using wooden dowel(C) and turn cam lock(B) in plate 19,20 clockwise to tighten as shown. Slide plate 13 into available slots, attach plate 21 and fix with screw(D) as shown.
Ex12 19 Hx4 Fx2 F-1 Ø3x12mm F-2 Ø4x20mm 380mm Fix runner(H-2) to drawer sides using screw(E) as shown. x2 F-2 20 F-1 F-2 E H-2 F-1 19 Fix knob(F-1) using screw(F-2). 18 E E H-2 E E H-2 20 H-1 H-1 H-2 18 18 Align rails, slide drawers.
21 Mx2 M-1 M-2 Ø4x35mm Install anit-tipping device(M) as shown. M-2 WALL M-2 1. M-2 WALL 2. 3.
22 If there is misalignment after you install, adjust the screw to the best condition.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
