Hall Tree Version:27/07/2022 1/25
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 66 7 x 40 mm F x 16 Bx8 7 x 40 mm Gx6 C x 74 15 x 9 mm Hx2 6 x 40 mm TOOL 3/25 D x 40 4 x 14 mm I x 24 E x 30 5 x 40 mm J x 32
23 19 22 19 18 12 20 16 14 11 16 17 16 16 11 13 21 15 10 6 7 4 24 5 6 24 9 8 24 24 8 24 24 8 24 24 6 5 7 4 6 3 1 2 4/25
A x 16 1 7 x 40 mm Insert quickfit screws (A) into plate 1,3 as shown.
Fx4 2 6 x 40 mm Connecet plate 1 and 2 with wooden dowel(F) as shown. F F 2 1 F F 1 2 F Cx4 3 15 x 9 mm Insert cam locks (C) into plate 2 at first. Turn cam locks clockwise to tighten.
Fx4 4 6 x 40 mm Attach the component to plate 3 with wooden dowel(F) as shown. F F 2 1 F 2 1 F F 3 F C x 12 5 15 x 9 mm Insert cam locks (C) into plate 1,2 at first. Turn cam locks clockwise to tighten as shown.
A x 20 6 7 x 40 mm Insert quickfit screws(A) into plate 3, 4,5 as shown.
7 Connect plate 4,5 with 6 as shown. 6 6 5 4 5 6 6 4 C x 16 8 15 x 9 mm Insert cam locks (C) into plate 6 at first. Turn cam locks clockwise to tighten.
E x 10 9 5 x 40 mm Attach plate 5 and 8 into plate 3 with screws(E), as shown. E 5 8 8 E E E 3 E E E E 8 5 E E E Cx4 10 15 x 9 mm Insert cam locks(C) into two plate 4 at first. Turn cam locks clockwise to tighten.
A x 18 11 7 x 40 mm Insert quickfit screws(A) into plate 7 and 10 as shown.
Attach plate 7 to plate 4 as shown. 7 4 7 4 Cx4 13 15 x 9 mm Insert cam locks(C) into plate 7 at first. Turn cam locks clockwise to tighten.
14 Slide plate 9 into available slots as shown. 9 15 Cover plate 10 as shown.
C x 14 16 15 x 9 mm Insert cam locks(C) into plate 4,8 at first. Turn cam locks clockwise to tighten. C 10 C C 4 5 C 8 C 8 8 C C 4 5 Fx8 17 6 x 40 mm Connect plate 12,13 with plate 11 and 14,15 with plate 11 using screw(F) as shown.
18 Slide plate 16 into available slots as shown. 12 14 16 16 11 16 11 13 16 15 B x8 19 7 x 40 mm Insert quickfit screws(B) into both sides of plate 17 as shown.
20 Connect part 12,13,14,15 with 17 as shown. 12 14 11 11 17 13 15 Cx8 21 15 x 9 mm Insert cam locks(C) into plate 12,13, 14,15 at first. Turn cam locks clockwise to tighten.
E x4 22 5x40 mm Attach plate 19 to plate 18 screws (E) as shown. 19 E 18 E E 19 E E E A x2 23 7 x 40 mm Insert quickfit screws (A) into plate 18 as shown.
24 Attach plate 18 to plate 17 as shown. 18 17 Cx2 25 15 x 9 mm Insert cam locks(C) into plate 17 at first. Turn cam locks clockwise to tighten.
Ax4 26 7 x 40 mm Insert quickfit screws(A) into plate 20 and 21, as shown. A A 20 A A A 21 E x8 27 5x40 mm Insert plate 20 and 21 into assembled unit with screws(E), as shown.
Cx4 28 15 x 9 mm Insert cam locks(C) into plate 18 at first. Turn cam locks clockwise to tighten. C C C 18 20 C C 21 29 Slide plate 22 into available slots as shown.
E x8 30 5x40 mm Attach part 23 to assembled unit with screws(E), as shown. E E 21 E 19 E E 20 23 19 E E E E E D x 12 31 Gx6 4 x 14 mm Fix part(G) to assembled unit with screws(D), as shown.
Ax6 32 7 x 40 mm Insert quickfit screws(A) into plate 10 as shown. A A A A A A A A 10 33 Assemble two components as shown.
Cx6 34 15 x 9 mm Insert cam locks(C) into plate 17, 20 and 21 at first. Turn cam locks clockwise to tighten. 20 C C 17 21 C C C C Dx4 35 C C Hx2 4 x 14 mm Fix part(H) to back plates with screws (D), as shown.
Dx4 I x 24 36 4 x 14 mm Reinforce the back plates with part(I) and screws (D), as shown.
38 Put shelves 24 in 24 24 24 24 24 24 24 24 39 25/25
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
