Dresser 1/16
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 56 6 x 30mm F x 10 M4 x 40mm Lx1 B x 56 15 x 10mm G x 18 2.
1 2 1PC 5 3 1PC 6 1PC 9 1PC 4PCS 17 21 2PCS 16 4PCS 19 6PCS 22 2PCS 2PCS 4PCS 4PCS 12 15 18 3PCS 1PC 11 14 1PC 8 7 10 13 1PC 1PC 1PC 4 6PCS 20 4PCS 23 2PCS 4/16 1PC 24 2PCS 1PC
1 6 4 7 2 9 24 20 10 8 3 8 12 8 13 11 5 13 11 16 22 13 X2 12 16 13 23 17 18 21 15 X4 14 18 19 5/16
Cx4 CR x 1 CL x 1 1 M3 x 10mm Fix slide rail(CL) and (CR) to both sides of board 4 with screw(C) as shown. C C 180 C C C CL CR 4 4 Please pay attention to the holes where the accessories are inserted. c CR CL c c c Fx2 2 M4 x 40mm Please don't use an electric screwdriver or use force to rotate, may cause crack. F F 7 F 24 4 Attach board 7 and 24 to board 4 with screw(F) as shown.
CR x 5 Cx20 3 CL x 5 Ax10 3x10mm 6x30mm Fix slide rail(CL) and (CR) to board 2 and 3 c with screw(C) as shown. Insert quickfit screw(A) A C into corresponding holes C A C C in board 2 and 3 CL A CL A C C with screwdriver as shown. CL AC A C CR 2 CL C CL C A C A C CL C C C A C CR C A CA CR C C CR 3 CCR CR c 4 c Bx5 Dx5 15 x 10mm 6 x 30mm Attach plank 7 and 8 and 24 to board 3 with wooden dowel(D) and turn cam locks(B) clockwise to tighten as shown.
Bx5 Dx5 5 15 x 10mm 6 x 30mm Attach board 2 to the component with wooden dowel(D) and turn cam locks(B) clockwise to tighten as shown. 2 D B 7 D D B 24 D B 8 D B 8 8 B D 180° B Fx4 6 Dx4 6 x 30mm M4 x 40mm Ax4 6 x 30mm Attach board 5 to the assembled unit with wooden dowel(D) and fix with screw(F) as shown. Insert quickfit screw(A) into corresponding holes in board 3 with screwdriver as shown.
Ax8 7 Dx8 Bx8 6 x 30mm 6 x 30mm 15 x 10mm Insert quickfit screw(A) into leg 13 at first, attach leg 13 to plank 12 with wooden dowel(D),and turn cam locks(B)clockwise to tighten as shown. 13 A A x4 13 D B x2 12 B 13 D 13 13 D D B B 180° 11 D B 11 Attach leg components to plank 11 with wooden dowel(D), and turn cam locks(B)clockwise to tighten as shown.
8 Bx4 Dx4 15x10mm 6x30mm Fx4 M4x40mm Attach the leg base to board 5 with wooden dowel(D),and turn cam locks(B)clockwise to tighten. Then fix with screw(F) as shown. B B 11 D B 12 F B B 180° 12 D F D D B 11 F F Ax6 9 D 5 Nx1 Hx4 6 x 30mm Tx1 M4 x 25mm 4 x 12mm Attach plank 6 to board 1 with screw(H) at first. Insert quickfit screw(A) into corresponding holes in board 1 and 3 with screwdriver as shown.
10 Bx6 15 x 10mm Dx4 6 x 30mm Cover board 1 to the assembled unit with wooden dowel(D), and turn cam locks(B)clockwise to tighten as shown.
11 G x 18 2.5 x 10mm Connect board 9 and 10 with plank 20. 10 9 20 Fix back board 9 and 10 with screw(G) as shown.
Ax20 12 Bx20 6 x 30mm Cx16 Ex20 Kx8 DRx4 DLx4 15 x 10mm M3 x 10mm M4 x 30mm Jx8 M4 x 16mm 1 2 3 >90° 18 E E Attach board 16,18,19 to board 17 with screw(E). A A J A 19 17 J 16 E E E Insert quickfit screw(A) into board 15, fix knob(K) to board 15 with screw(J) as shown. K B 180° Slide board 14 into available slots. 18 DR C Fix runner(DL) and (DR) to board 16 and 18 respectively with screw(C) as shown.
13 Ax8 Cx8 Bx8 6 x 30mm Ex8 DL x 2 K x2 DR x 2 15 x 10mm M3 x 10mm M4 x 30mm Attach board 16,18 to board 22 with screw(E). M4 x 16mm E E 18 22 A E Jx2 16 A E A J J K A 21 K Insert quickfit screw(A) into board 21, fix knob(K) to board 21 with screw(J) as shown. A 23 Slide board 23 into available slots. B 180° C C B 18 B B 23 DL 16 C DR C 18 x2 16 21 B Attach board 21 to the component and turn cam locks(B)clockwise to tighten as shown.
L x 1 14 M x 1 Fix part(L) to a proper positon of your wall. WALL L L L M Fix anti-dumping device(N) to part(L) with screw(M) as shown.
15 Align rails, insert all drawers.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
