Display Cabinet Version:05/12/2023 1/16
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 32 6 x 35 mm E x 64 B x 32 C x 32 8 x 30 mm Dx1 15 x 9 mm F x 16 Gx2 Hx8 Lx2 Mx2 Nx4 3.
8 16 7 2 5 14 11 15 6 17 1 7 10 7 3 4 12 4 ALWAYS install tipover restraint provided. NEVER put a TV on this product. NEVER allow children to stand,climb or hang on drawers,doors,or shelves. NEVER open more than one drawer at a time. Place heaviest items in the lowest drawers. This is a permanent label.
1 A x 10 A x 10 6 x 35 mm 6 x 35 mm A A A A A 2 A A A A 2 A Screw eccentric rod(A) into board 2 with a screwdriver as shown. 2 A x 10 6 x 35 mm A Screw eccentric rod(A) into board 1 with a screwdriver as shown.
3 Ax4 6 x 35 mm Screw eccentric rod(A) into board 3 with a screwdriver as shown. A A A 3 A 3 4 Cx4 A Bx4 15 x 9 mm 8 x 30 mm Insert wooden dowel(C) into board 3 at first. Attach board 4 to board 3,add cam lock(B) into board 4 and turn clockwise to tighten as shown.
Dx1 5 Ex6 Ax2 3.5 x 14 mm Px1 Qx2 6 x 35 mm 6 x 35 mm Fix push latch(D) to board 6 with screw(E) as shown. Fix steel tube 17 to board 6 with screw(Q) as shown. P E E E E E E 17 Q D A Q 6 A 6 E E D 6 E 6 E E E 6 Flip the board 180°,screw eccentric rod(A) into board 6 as shown. Ex6 Ax2 6 x 35 mm 3.5 x 14 mm Screw eccentric rod(A) into board 5 with a screwdriver as shown. Fix rack 16 to board 5 with screw(E) as shown.
7 Cx4 Bx4 15 x 9 mm 8 x 30 mm Insert wooden dowel(C) into board 11 at first. 5 B C B C 11 C 5 B C B 180° 6 Attach board 5 and 6 to board 11,add cam lock(B) into board 11 and turn clockwise to tighten as shown. 11 8 C x 10 Ex1 B x 10 15 x 9 mm 8 x 30 mm 3.5 x 14 mm Insert wooden dowel(C) into board 2 at first. Attach board 5, 6, 10, 3 and 4 to board 2,add cam lock(B) and turn clockwise to tighten as shown.
Insert back board 7 and 15 along available grooves as shown. 2 5 6 10 15 3 7 7 10 C x 10 B x 10 15 x 9 mm Ex1 8 x 30 mm 3.5 x 14 mm Attach board 5, 6, 10, 3 and 4 to board 1,add cam lock(B) and turn clockwise to tighten as shown. Insert wooden dowel(C) into board 1 at first.
11 Insert back board 7 along available grooves as shown. 7 2 5 1 12 Ax4 6 x 35 mm Screw eccentric rod(A) into board 8 with a screwdriver as shown.
13 Cx4 15 x 9 mm Bx4 8 x 30 mm Insert wooden dowel(C) into board 1 and 2 at first. Cover board 8 to the top, add cam lock(B) and turn clockwise to tighten as shown. B 8 B B C C B C C 2 8 B 1 2 C 180° 14 E x 18 F x 16 Gx2 3.5 x 14 mm Insert buckle(F) into back slots and fix with screw(E) as shown. Fix part(G) to board 1 with screw(E) as shown.
Nx4 15 Connect four board 14 together, place the component into cabinet. 14 Tear off the back glue of the light strip! 14 14 Please note that the wire of the lamp belt is to be threaded through the hole of board 7 and 15 8 N 8 7 15 7 7 Attach LED light strip.
16 Hx4 Jx8 3 x 9 mm Fix hinge(H) to board 12 with screw(J) as shown. J H J 12 H J H J H 12 H J 12 J H 17 Hx4 Jx8 3 x 9 mm Fix hinge(H) to board 13 with screw(J) as shown.
18 E x 16 3.5 x 14 mm E E E E 1 2 13 E x 16 3.5 x 14 mm Assemble door 12 to board 1 by fixing hinge with screw(E) as shown. E 12 E 13 Assemble door 13 to board 2 by fixing hinge with screw(E) as shown.
20 Mx2 Lx2 4 x 40 mm Install anti-tipping device as shown.
21 16/16
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
