TV Cabinet Version:12/12/2022 1/16
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size Ax3 Drawer Glide(Left) E x 10 4 x 40 mm Jx2 Bx3 C x 30 3 x 12 mm Drawer Glide(Right) F x 56 G x 56 6 x 35 mm 15 x 9 mm Lx2 K x 12 3 x 12 mm 8 x 50 mm 3/16 D x 58 8 x 30 mm Hx6 4 x 60 mm M x 12 4 x 35 mm
6 7 7 16 7 8 8 2 8 3 18 3 17 1 4 20 19 21 5 20 19 22 X2 11 10 18 12 9 X3 15 14 13 4/16
Ax2 1 Bx2 C x 12 3 x 12 mm Fix slide rail(A) and (B) to plate 1 and 2 respectively using screw(C) as shown. C C B A C 2 B C 1 3 A C A X2 3 Fix slide rail(A) to plate 3 using screw(C) as shown. 1 E x 10 2 D x 12 L x2 8 x 30 mm 4 x 40 mm Flip the plate, fix slide rail(B) as shown. 8 x 50 mm Insert SHORT wooden dowel(D) into plate 1 and 2; insert LONG wooden dowel(L) into two plate 3 at fisrt. Connect plate 1,3 and 2 with plate 7 as shown.
F x 14 3 6 x 35 mm F Insert quickfit screw(F) into corresponding holes in plate 6 with a screwdriver as shown. F F F F F 6 F F F F F 6 F F G x 14 4 D x 14 8 x 30 mm 15 x 9 mm Slide back plate 8 along grooves. Cover plate 6 to the top with wooden dowel(D), put cam lock(G) into holes in plate 1,3,2,7 and turn clockwise 6 to tighten as shown.
F x 12 5 6 x 35 mm F F F F 13 F F 14 F F F 15 F F F 14 F Insert quickfit screw(F) into plate 13,14 and 15 as shown. 6 M x 12 4 x 35 mm M M X3 11 10 M 9 11 Fix plate 9 and 10 with plate 11 using screw(M) as shown.
Gx 4 7 15 x 9 mm Slide plate 12 along grooves. Attach plate 13 to plate 9 and 10, put cam lock(G) into holes in plate 9, 10 and turn clockwise to tighten as shown. 10 G G 12 9 G 9 G 13 13 G G Gx 4 8 15 x 9 mm Slide plate 12 along grooves. Attach plate 14 to plate 9 and 10, put cam lock(G) into holes in plate 9,10 and turn clockwise to tighten as shown.
Gx 4 9 15 x 9 mm Slide plate 12 along grooves. Attach plate 15 to plate 9 and 10, put cam lock(G) into holes in plate 9,10 and turn clockwise to tighten as shown. 10 G 12 9 G 9 G 10 15 15 Ax1 Bx1 Cx4 3 x 12 mm Fix runner(A) and (B) to plate 9 and 10 respectively using screw(C) as shown.
Ax1 11 Bx1 Cx4 3 x 12 mm Fix runner(A) and (B) to plate 9 and 10 respectively using screw(C) as shown. 9 C 10 C B C B C A 9 C 14 A C Ax1 12 Bx1 Cx4 3 x 12 mm Fix runner(A) and (B) to plate 9 and 10 respectively using screw(C) as shown.
F x6 13 6 x 35 mm F F 21 F F F 16 F F 21 Insert quickfit screw(F) into plate 21 and 16 as shown. Gx 6 14 15 x 9 mm Dx 4 8 x 30 mm Connect plate 21 with plate 22 using wooden dowel(D), put cam lock(G) into holes in plate 22 and turn clockwise to tighten as shown. D 21 G 22 D D 21 D G G G 17 22 D 16 G G G Connect plate 16 with plate 17 using wooden dowel(D), put cam lock(G) into holes in plate 17 and turn clockwise to tighten as shown.
15 F x 24 6 x 35 mm F F 19 F F x4 x2 F F F 18 19 F F F F Insert quickfit screw(F) into plate 19 and 18 as shown. 16 Hx3 4 x 60 mm Dx 2 8 x 30 mm 22 D 18 H H D H H 18 H 12/16 Attach plate 18 to plate 22 with wooden dowel(D), then fix using screw(H) as shown.
Dx 2 Hx3 17 8 x 30 mm 4 x 60 mm Attach plate 18 to plate 17 with wooden dowel(D), then fix using screw(H) as shown. H 17 D 81 D H H 18 H 18 Gx 8 Dx 8 8 x 30 mm 15 x 9 mm X2 19 D G D 20 G Connect plate 19 with plate 20 using wooden dowel(D), put cam lock(G) into holes in plate 20 and turn clockwise to tighten as shown.
Gx 8 19 Dx 8 8 x 30 mm 15 x 9 mm Attach the component to plate 18 with wooden dowel(D), put cam lock(G) into holes in plate 19,20 and turn clockwise to tighten as shown. 17 D D G G GG D G 20 G G D G GG Gx 8 D 19 D 18 D 19 18 D D Dx 8 8 x 30 mm 15 x 9 mm Attach another component to another plate 18 with wooden dowel(D), put cam lock(G) into holes in plate 19,20 and turn clockwise to tighten as shown.
21 J x1 Kx6 3 x 12 mm Fix part(J) to plate 16 and 17 using screw(K) as shown. 16 K J 16 J 17 K 22 17 J x1 Kx6 3 x 12 mm Fix part(J) to plate 21 and 22 using screw(K) as shown.
23 Assemble into one unit. 24 Align rails, slide the drawer.
WARRANTY WARRANTY CLAIMS 23 •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
