Hall Tree
Insert quickfit screw(A) into corresponding holes in plate 14 and 15 with a screwdriver as shown. Fix two plate 16 to plate 15 using screw(F) as shown. Attach plate 12 and 13 to plate 14 and 15 with wooden dowel(H), put cam lock(B) into holes in plate 12,13 and turn clockwise to tighten as shown.
Cover plate 11 to the component with wooden dowel(H), then fix using screw(E) as shown. Insert quickfit screw(A) into plate 8 and 9 at first. Fix plate 8 and 9 to two plate 7 using screw(E) as shown. Attach the two assembled parts to plate 12 and 13 with wooden dowel(H), put cam lock(B) into holes in plate 12,13 and turn clockwise to tighten as shown.
Insert quickfit screw(A) into plate 11 and 17(x2) at first. Connect plate 17 with plate 18, put cam lock(B) into holes in plate 18 and turn clockwise to tighten as shown. Attach the part to plate 11 with wooden dowel(H),put cam lock(B) into holes in plate 17,18 and turn clockwise to tighten as shown.
Fix two plate 16 to plate 10 using screw(F) as shown. Fix hinge(J) to plate 10 using screw(C) as shown. Fix part(D) to plate 16 using screw(G) as shown. Attach plate 10 to plate 15 by fix hinge using screw(C) as shown.
Connect plate 2 and 4 with plate 3 with wooden dowel(H) as shown. Fix plate 1 to plate 2,3 and 4 using screw(E) as shown. Fix hook(L) to plate 2 and 3 using screw(N). Attach the component to plate 15 with wooden dowel(H) as shown.
Fix part(K) to plate 2,3 and 4 using screw(C) as shown. Fix plate 2 and 4 with two plate 7 using screw(E) as shown.
Fix two plate 5 to plate 4,15 and 2 using screw(E) as shown. Fix plate 6 to plate 4,3,2 and 15 using screw(F) as shown.
Install anti-tipping device(M) as shown.
